Calibrators Dealers in Kothrud, Pune

Model-DGCH - 25It's universal design enables it to calibrate both plunger and lever DTI's (Dial Test Indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the Abbe's principle. SPECIFICATIONS : 25 mm travel covering the majority of common indicators Accepts lever indicators with stylus up to 40 mm long Computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard Kit incorporates, Cary case ModelDGC-25 calibrator Master gauge (Baker Electronic Dial Gauge ED1) RS 232 cable to transfer output to computer with software Magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore Gauge holding bracket and extension rod. For more details and enquiry please contact.

Overload and short circuit protection,Pure Sine wave with variable frequency,Setting by Multi turn potentiometers for VA in 4½ digit MFC,Frequency setting by potentiometer,Parameter and range selection by inbuilt micro controller based unit and relays. Bar of LEDs to indicate parameter and range,Separate output ports for V (Hi), mA (Hi), 10A(Hi) and com,Multi Function Calibrator is useful for calibration of Digital Multi meters, Clamp on Meters, Digital Panel Meters and Analog Panel Meters, It is basically a variable source with different ranges of DC Voltage, AC Voltage, DC Current, and AC Current. It has been designed to cover the calibration of maximum ranges of variety of models of Multimeters available in the market

Universal Calibrator is used for the calibration of many types of Process Control Instruments which accept mV, mA & RTD Input. This can be used as better tool for fault finding & confirmation of instrument sensor reliability, hence extremely useful for Commissioning Activity, Quality Assurance, Routine Maintenance & Trouble Shooting.

it's universal design enables it to calibrate both plunger and lever dti's (dial test indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the abbe's principle. specifications :25 mm travel covering the majority of common indicators accepts lever indicators with stylus up to 40 mm long computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8” shank can be tested. Bore gauges up to 150 mm can be checked. The standard kit incorporates, cary case modeldgc-25 calibrator master gauge (baker electronic dial gauge ed1) rs 232 cable to transfer output to computer with software magnifying glass 3/8” to 8 mm stem mounting sleeve. Bore gauge holding bracket and extension rod. For more details and enquiry please contact.

• Display: 199.99 digits LCD type
• Selection: mV source, mV measure, mA source, mA measure, Resistance source, Resistance measure

ESD�s 310 is a portable battery operated calibrator suitable for calibrating field instruments. This can feed as well as measure mV, mA and resistance inputs. These calibrators are characterised by highly stable and precise output.

Electro Pneumatic Positioner, axial pneumatic valves

Circular Chart Recorder, single channel universal input data logger

Non-Contact Type Tachometer Calibrator