Back Back
wire wound finned tubes
Tube Size : 3/8",1/2", 5/8", 3/4", 1”, 1.25” Outer Dia.Max Length : 6 meters Material : C.S., G.I., Copper, S.S.304/316, Cupro-Nickel, Brass
Material : C.S., G.I., Copper, S.S.304/316, Cupro-Nickel, Brass
Size : 3/8",1/2", 5/8", 3/4", 1”, 1.25” Outer Dia.
...more
Water Cooled Heat Exchangers
• Air Compressors Coolers • Gear Box Oil Coolers • Hydraulic Power Pack Oil Coolers • Intercoolers • Aftercoolers • Chillers • Condensers
...more
heavy duty radiators
Heavy Duty Radiators for Industrial Engines used in Compressors, Cranes, Bulldozers, Dumpers, Diesel Generating Sets ( 5 HP to 1000HP ), Loaders, Excavators of reputed organisations like Kirloskar Pneumatics, Indian Railways, Defense Units, Refineries, Automobile, Chemical Plants, Sugar Factories etc.Industrial Radiators Air Compressors Earth Moving Equipments Alternators Engines D.G. Sets
...more
Oil Coolers
Heavy Duty Radiators for industrial engines used in compressors ( 200 CFM to 900 CFM ), Cranes, Bulldozers, Dumpers, Diesel Generating Sets ( 5 HP to 1000HP ), Loaders, Excavators of reputed organisations like Kirloskar Pneumatics, Indian Railways, Defense Units, Refineries, Automobile, Chemical Plants, Sugar Factories etc..
...more
Integral Finned Tubes
Max Length : Max 19 fins/inch, 26 fins/inch Tube Size : 3/8”, 1/2”, 5/8”, 3/4”, 1” Outer Dia.Max Length : 6 meterMaterial : C.S., Copper, S.S.304/316, Cupro-Nickel, Brass.
...more
Helical Tension Wound Finned Tubes
Max 16 fins/inch Tube Size : 3/8”, 1/2", 5/8”, 3/4" & 1", 1.25” Outer Dia. Max Length : 6 meters Material : S.S.304/316.
Length : 6 meters
Material : S.S.304/316.
...more
Heavy Duty Refrigeration Compressors
Salient Features of Construction : 1. Welded steel crankcase : Low in weight Gas tight and impact proof Smooth internal surfaces guarantee good oil condition. 2. Water cooled cylinder block : This crankcase has in built water cooling jacket for cylinder head to avoid over heating of piston and liner element leading to trouble free long life of compressor 3. Silent oil pump : Internal gear pump is provided with special self aligning driving plate to reduce vibrations to compressor and ensure trouble free long life of oil pump. 4. Pulsation dampener : Built in pulsation dampener to reduce pulsation to entire system of refrigeration 5. Crankshaft and main bearings : Bearing surfaces of the high quality nodular cast iron crankshaft are ground to fine tolerances.Main bearings are white metal lined steel backed bushes, pressed into the cast iron bearing covers. Intermediate bearing blocks are provided with split type bearing shell of the same type. Each crankshaft is dynamically balanced together with the counter weights 6. Piston / connecting rod assembly : Perfect sealing and low oil consumption due to 3 compression and 2-oil scrapper rings on each aluminium piston. The nodular iron connecting rod is drilled through for pressure lubrication of the piston pin Steel backed white metal shells on big end and bronze bearing on small end of connecting rod.The complete assembly can be removed from the top for servicing without withdrawing the cylinder liner 7. Cylinder liner and suction valve : Interchangeable cylinder liners are made of finegrained, centrifugally cast, alloy iron. Fine boring and honing results in a mirror smooth running surface. A hydraulic mechanical suction valve lifting mechanism on each individual cylinder achieves loading and unloading. For unloading, the suction valve ring is lifted from its seat in the cylinder collar by spring tension. Admitting controlled oil pressure to the control piston, allowing the suction valve ring to descend on its seat effects loading or cylinder. 8. Discharge valve assembly : Three concentric discharge valve rings ensure ample gas passage at low lifting height. The use of sinusoidal springs together with precision machined and lapped surface results in a trouble-free operation for a remarkably long time. Minimum inventory for spares since most parts are identical throughout the CH series compressors. 9. Lubrication system & oil filter : Forced Lubrication by an Internal Gear pump directly driven by the Crankshaft. The Pump incorporates two differential pressure regulators to provide separate pressures for two oil systems : Lubrication system and control oil system for operating cylinder loading unloading mechanism. Automatically operating solenoid valve ensures complete unloaded start of compressor. A Metal gauze suction filter element and a throwaway discharge paper filter cartridges are provided for excellent filtering capacity of the lubricating oil. Operational Characteristics : 1. Quick maintenance : Parts subjected to wear are easily accessible through large service doors with minimum special tools2. Easy cleaning : suction gas strainer Inside gauze strainer element can be easily removed and cleaned within no time .3. Easy maintenance : as piston/connecting rod assembly can be removed without removing the cylinder liner.4. Minimum oil consumption : is ensured by providing three compression rings & two oil scraper rings per piston - thus minimising oil through discharge gas line5. Safety : is ensured by bult-in arrangement of buffer spring which protects compressor from incidental liquid hammer6. Extra safety : is ensured by built-in sight glass, making oil return flow visible hence avoids dry run of commpressor and protect bearing wear and tear7. Trouble-free long running life : this is possible due to highly effective oil purification by two filters. CH-Series Compressors are : 1. Designed to operate with Ammonia, R22 & other HFC refrigerants.2. Ideally suitable for continuous duty, process refrigeration liquefaction plants, ice plants, cold storages, etc.3. Most suitable for industrial refrigeration and low temperature applications4. Available in single stage as well as two stage versions Accessories : 1. V-belt Drive 2. Base Frame for Compressor3. Oil Separator 4. Shut-off Valves5. Gauge/Cutout Board Assembly6. Crankcase Heater Single Stage Compressor Click Here for Table and Graphs Two Stage Compressor Click Here for Table and Graphs Note : We reserve the right to modify the specifications in accordance with improved designs. Although every effort has been made to maintain accuracy in the data given, the figures are in no way binding.Q : cooling capacity [kW]; Pe : compressor brake power [kW]The chart rating is for maximum speed : 1000 rpm; Minimum speed allowed : 400 rpmThe capacity and power consumption ratings are possible by interpolation for other speed conditions.The motor power is 10% over the compressor brake power DTSC : 0°C; DTSC : 50C Warranty : Every compressor carries a standard warranty against manufacturing defects of 12 months from date of startup / commissioning by CTTPL authorised engineer or 18 months from date of dispatch whichever occurs early. The warranty card must be produced for warranty claims. Standard warranty does not contain consumables like oil, oil filter, gaskets, o-ring etc and warranty is not applicable if failure occurs due to fault in system design
...more
Heat Exchangers
Shell and Tube type Heat Exchangers, for Chillers, Intercoolers, Water Coolers for large generating sets up to 5000KVA, Furnaces, Motors, Stationary Compressors, Chemical Plants, Cement Factories, Petrochemicals, Type manufacturing units etc.
...more
Fined Tubes
Finned Tubes : Straight Fins : Max 12 fins/inchTube Size : 3/8”, 1/2", 5/8”, 3/4" & 1", 1.25” Outer Dia.Max Length : 6 MetersMaterial : C.S., Copper, S.S.304/316, Cupro-Nickel, Brass.
...more
Evaporative Condensers
Condensing temperature 40°c for Ammonia wet bulb temperature 26°c * • We can design for any capacity, rating as per customers requirement. Body constructed with G .1. Sheet and hot deep galvanising structure. • Condenser unit complete with SS-304, with 025.4,019.05. Tube • Airfans - axial flow fan, motor with IP - 55 insulation. Salient Features • Compact Design, Space Saving • Chocking Free Spray Nozzle • Design Base - HTRI
...more
Elliptical Finned Tubes
Max 16 fins/inch Tube Size : 3/8”, 1/2", 5/8”, 3/4" & 1", 1.25” Outer Dia.Max Length : 6 meters Material : C.S., Copper, S.S.304/316, Cupro-Nickel, Brass
Length : 6 meters
Material : S.S.304/316
...more
Soldered Finned Tube
Max 11 Fins/inch Tube Size : 3/8”, 1/2", 5/8”, 3/4" & 1", 1.25” Outer Dia.Max Length : 6 meters Material : C.S., Copper, S.S.304/316, Cupro-Nickel
Size : 3/8”, 1/2", 5/8”, 3/4" & 1", 1.25” Outer Dia.
Material : C.S., Copper, S.S.304/316, Cupro-Nickel
...more
Corrugated Finned Tubes
Tube Size : 3/8”, 1/2", 5/8”, 3/4" & 1", 1.25” Outer Dia. Max Length : 6 meters Material : S.S.304/316.
Size : 3/8”, 1/2", 5/8”, 3/4" & 1", 1.25” Outer Dia.
Material : S.S.304/316.
...more
Cooling Coils
Condenser & Evaporator Cooling Coils for Industrial & Domestic Air-Conditioners.• Capacity from 1.5 tones to 10 tones.• Dehumidifiers., Condensers., Air Conditioners Industrial.
...more
Air Coolers for Centrifugal Compressor
• Manutrur ovelers & Afrercoolers for Centrifugal Compressor • Drying Plants Heaters. • Sugar Factories Heaters.• Seed Drying Heaters. • Milk Powder Drying Heater • Paper Mills Heaters.
...more
Air Coolers
• Air Coolers for heavy duty motors, generators, turbo chargers, of different fin designs( e.g. Crimped fin, wire wound fin ).• Air heaters ranging up to 375ºC, for textile and petrochemical units.
...more
Air Cooled Intercoolers
• Air Cooled Intercoolers and After coolers : Intercoolers and After coolers Bundles for various Centrifugal Compressors with various designs.• Capacity max up to 80,000 m3/hr.
...more
Air Cooled Heat Exchangers
Manufacturers and Designers of Air Cooled Heat Exchanger using various finned tubes with different material of Constructions like Copper, S.S. 304/ 316, C.S., M.S., Brass, Cupro-Nickel, Aluminium etc.
...more
Air Aftercoolers
Retaining foods freshness and value can be achieved by cooling and conditioning air inside cold room. This can be done by releasing excess heat to ambient air outside. It's all thank to air heat exchanger by Chintamani Thermal Technologies Pvt. Ltd. which are capable of capturing, and dissipating heat with right efficiency to surrounding. Air heat exchanger by Chintamani Thermal Technologies Pvt. Ltd. delivers perfectly balanced air cooling capacity and air flow ratio which is required in the world of agriculture like vegetables, potato, fruits and also modern flower-growing installations which requires cooling and heating the air inside the green- house. These systems considerably improve both the quantity and the quality of production - while consuming less energy and reducing operating costs.
...more
Aftercoolers
Retaining foods freshness and value can be achieved by cooling and conditioning air inside cold room. This can be done by releasing excess heat to ambient air outside. It's all thank to air heat exchanger by Chintamani Thermal Technologies Pvt. Ltd. which are capable of capturing, and dissipating heat with right efficiency to surrounding.
...more
Refrigeration Compressors
Salient Features of Construction : 1. Welded Steel Crankcase : Less in weight, gas tight and impact proof smooth internal surfaces guarantees good oil condition. 2. Water Cooled Cylinder Block : The crankcase has in built water cooling jacket to avoid over heating of piston and liner element leading to trouble free long life of the compressor. 3. Lubrication System and Filter : Crankshaft driven gear pump provides forced fed lubrication. The Pump incorporates a differential pressure regulator to provide separate pressures for two oil systems: lubrication system and control oil system. Automatically operating hydraulic delay valve ensures complete unloaded start of the compressor results in lesser starting current. A metal gauze suction filter element and magnetic filter are provided for excellent filtering capacity of the lubricating oil. 4. Crankshaft and main Bearings : Bearing surfaces of the high quality nodular cast iron crankshaft are ground to fine tolerances. Main bearings are white metal lined with steel backed bushes, pressed into the cast iron bearing covers. An intermediate bearing block is provided with split type bearing shell of the same type. Each crankshaft is dynamically balanced together with the counter weights 5. Piston and Connecting Rod Assembly : Compression and scrapper rings on the aluminum piston provided perfect sealing and low oil consumption. The nodular iron connecting rod is drilled through for pressure lubrication of the piston pin. Steel backed white metal shells on big end and bronze bearing on small end of connecting rod. The complete assembly can be removed from the top for servicing without withdrawing the cylinder liner. 6. Cylinder Liner and Suction Valve : Interchangeable cylinder liners are made of fine grained, centrifugally cast, alloy iron. Fine boring and honing results in a mirror smooth running surface. A hydraulic mechanical suction valve lifting mechanism on each individual cylinder achieves efficient and quick loading and unloading. For unloading, the suction valve ring is lifted from its seat in the cylinder collar by spring tension. Admitting controlled oil pressure to the control piston, allowing the suction valve ring to descend on its seat effects loading or cylinder. 7. Discharge Valve Assembly : Three concentric discharge valve rings ensure ample gas passage at low lifting height. The use of sinusoidal springs together with precision machined and lapped surface results in a trouble-free operation for a remarkably long time. Minimum inventory for spares since most parts are identical throughout the CH series compressors. Operational Characteristics : 1. Quick Maintenance : Parts subjected to wear are easily accessible through large service doors with minimum special tools.2. Easy Cleaning : Suction gas strainer inside gauze strainer element can be easily removed and cleaned within no time.3. Easy Maintenance : Piston/connecting rod assembly can be removed without removing the cylinder liner.4. Minimum Oil Consumption : Is ensured by providing compression rings & oil scraper rings per piston - thus minimizing oil through discharge gas line.5. Safety : Is ensured by built-in arrangement of buffer spring which protects compressor from incidental liquid hammer.6. Extra Safety : Is ensured by built-in sight glass, making oil return flow visible hence avoids dry run of compressor and protect bearing wear and tear.7. Trouble-free Long Running Life : This is possible due to highly effective oil purification by two filters. CH-Series Compressors are : 1. Designed to operate with Ammonia, R22 & other HFC refrigerants.2. Ideally suitable for continuous duty, process refrigeration liquefaction plants, ice plants, cold storages, etc.3. Most suitable for industrial refrigeration and low temperature applications Accessories : 1. V-belt Drive 2. Base Frame for Compressor3. Oil Separator 4. Shut-off Valves5. Gauge/Cutout Board Assembly 6. Crankcase Heater Note : We reserve the right to modify the specifications in accordance with improved designs. Although every effort has been made to maintain accuracy in the data given, the figures are in no way binding.
...more
Reviews & Ratings
Write a ReviewBe first to Rate
Rate ThisOpening Hours
Share your Correspondence Details to receive messages from Chintamani Thermal Technologies Pvt. Ltd.
Post Free Ad