CNC Lathe Machine Dealers in Pune

Our company shares glorious credentials with the eminent Suppliers of CNC Lathe Machine. The Lathe Machines we make available come with FEM optimized structure for maximum rigidity. Bulk orders of these are processed by us as per the specific requirements of the buyers. The entire range of the machines is reasonably priced by us. Details Anti friction guide ways for high position accuracies Rigid main spindle supported on high precision bearings Hydraulically operated trail stock A.C. spindle & servo controlled axes drives Laser calibrated axes for precise positioning Full guarding Wide options   Standard Accessories Coolant System with Splash Guard Machine Light A set of tool holders One set of hand tools   Options Accessories Chip Conveyor/Bucket Panel Air Conditioner Built-in tool pre setter Two speed gear box for spindle drive

• Automatic Type: Automatic
• Machine Specification: Table Top CNC LATHE (Model - GCNL-01)
• Centre Height: 60 mm
• Swing Over Carriaget: 60 mm
• Distance Between Centers: 200 mm
• Max. Machining Diameter: 110 mm
• Max. Iongitudinal Travel: 240 mm
• Table Length with 'T' Slot: 150mm X 75mm
• Z Axis traverse: 240 mm
• X Axis traverse: 60 mm
• Spindle Inside Taper: MT1 Optional
• Spindle Speed: 100 - 3000RPM Infinitely variable
• Cross Slide Inclination: 0 Degrees
• Cutting Tool Size: 6 X 6 mm Square
• Spindle motor: DC Motor, 180W
• Threading: Straight/Taper
• Automatic Lubrication: Optional
• Inputs System: Metric/ Inch
• Control Axes: Simultaneous axes control
• Interpolation: Linear, Circular, elliptical and Parabolic
• Minimum increment: 0.005 mm
• Minimum Movement command: 0.005 mm
• Repeatability: ± 0.02 mm
• Rapid Feed Rate -X: 600 mm / min
• Rapid Feed Rate -Z: 600 mm / min
• Dwell (Seconds): Programmable
• Tool Offset with Turret: up to 8 tools
• Backlash compensation: Provided
• Speed override: 40% - 160%
• Feed override: 20% - 120%
• Type of Control system: PC based system
• Real Time Tool Path Simulation: Provided
• Floor Area: 700 mm x 500 mm

The CNC Roll turning Lathe is the ultimate replacement solution for Manual Lathes used by Steel Plants in the Roll Shop for Roll machining and pass cutting. Available in various Models, the CNC roll turning lathes drive a huge improvement in productivity, reduce the need for labor, eliminate manual errors and reduce the space required for turning operation in machining the Rolls. The CNC Roll turning lathes from Sparkonix provide an economical solution to improve the quality of end product, productivity of the manufacturing process and thus adds to your profitability.   Machine Tools Features High Torque capacity at Head stock Face plate Zero backlash with ball screw Provision for higher cutting force 4 Guide way Lathe Bed Perfect and Right Dimension of Bearing and Moving Parts Telescopic cover to protect guideways Rough and Finish Machining is achieved in the Lathe and with Siemens CNC System programming Laptop with CAD/CAM Software for every machine Remote diagnostics with ethernet ready machine   Advantages Reduced downtime by eliminating the manual changing of rolls Faster machining Idel for machining split pass forms Easily replaces more than 5 manual lathes and frees up the space and complexity on the shop floor Suaitable for composite and carbide rolls Significantly reduces the operation time and Operator time Cost savings through reduced inventory of rolls

• Model: CPL – 50

Table Locking Facility with Stepper Motor. Slide Motion through Recirculating Ball Screw. Manually Operated MT2 Taper Collet Holder. Circular Interpolation in X, Y Planes. Program Entry through Keyboard, Via PC. Single Block, Auto, Jog Modes for Execution. Canned Cycle for Drilling, Peck Drilling, Slot Milling. Axis Limit Switches for Safety Interlocks. Improper / Faulty Tool Operation Sequence is Detected. Emergency Stop is Provided. Depth of Cut 0.5 mm Only.

We take pleasure introducing ourselves as Quality used CNC machine for sale in India, we are pleased to state that our cnc machines are completely refurnished, sparingly used in very good condition. All the machines which we deal are completely under power and job trial can also provide on request.

CNC VERTICAL LATHES TWIN STAR VERTICAL CNC LATHES CNC ULTRA PERFORMANCE VERTICAL TURNING CENTERS WITH C AXIS HEAVY DUTY VERTICAL LATHES CNC ULTRA PERFORMANCE HEAVY DUTY VERTICAL TURNING CENTERS WITH C AXIS TWIN TURRET CNC VERTICAL TURNING CENTERS DOUBLE COLUMN 5 AXES MACHINING CENTERS SPECIAL PURPOSE MACHINES

• Machine Details:: Bed Type
• Flat / 45 Degrees Slant: Chuck Size
• 135 mm (Dia): Chuck Type
• Hydraulic/ Manual: Maximum Turning Diameter
• 60 mm: Maximum Turning Length
• 250 mm: Ball Screw X / Y / Z
• Ø25 x 5 – C3 Class: Guideways
• LM Guideways: Center Height
• 150 mm: Swing over Cross Slide
• 150 mm: Swing Over Bed
• 250 mm: Distance between Centre
• 320 mm: CNC Controller Details:
• Controller: Siemens / Fanuc Industrial Controller
• Available Options in Siemens Controller: 808D / 808 Advance / 828
• Available Options in Fanuc Controller: 0iTF / 0i Mate TD
• Accuracy:: Positioning
• 0.010 mm: Repeatability
• +/- 0.005 mm: Resolution
• 0.001 mm: Spindle:
• Spindle Motor: AC Motor with VFD
• Spindle Motor Capacity: 3.7 KW / 5 HP
• Spindle RPM: 100 to 3000 RPM
• Spindle Speed: Continuos Variable
• Spindle Nose Taper: A 2-3 / A 2-5
• Hole Through Spindle: 20 mm
• Axes: Axis Motor and Drive
• Servo Motor with Servo Drives: X Axis Travel
• 100 mm: Z Axis Travel
• 280 mm: Feed Rate
• 0 to 5,000 mm/min: Rapid Travel
• 5,000 mm/min: Turret and Tooling:
• Turret Type: Automatic
• Number of Stations: 8
• Tool Cross Section: 16 mm x 16 mm
• Boring Bar Size: 16 mm
• Tailstock:: Tailstock Base Stroke
• 170 mm: Tailstock Quill Stroke
• 30 mm: Tailstock Actuation
• Hydraulic/ Manual: Miscellaneous:
• Lubrication: Automatic
• Coolant: Automatic
• FMS Compatibility: Provided
• Dimension in mm: 1500 x 1200 x 1700 mm
• Power Supply: 415V, +-2% 50 Cycles, 3 Phase

We are a bracketed with the top most CNC Vertical Turning Machine (HVT-2000) Manufacturers, Exporters and Suppliers from Maharashtra, India. Owing to our rich industrial experience and a sophisticated manufacturing unit, we have engineered an excellent CNC Vertical Turning Machine (HVT-2000) that is used widely for various industrial purposes. It is designed in compliance with the set industrial guidelines and standards; therefore, it is works effectively and efficiently. Buy CNC Vertical Turning Machine from us at reasonable prices.

• Spindle Speed: 25-2500,25-2000rpm
• Max.turning dia: 460,460,860mm

Casted column & Table base, appriciated by Automotivepetrochemical inductries, Customized Special solutions for Break Drum, Fly Wheel, Break Disc, Hub etc. Single casted Bax way design of guides, High Precision, Durability & Productivity.

We have been providing with extensive range of workshop tools. Our workshop components are designed by experienced engineers as per the required norms of different engineering and mechanical industries. Lathe Machine is a prominent preference among the available workshop equipment’s. It remains a suitable option to complete specific set of machining activities. For better performance and more productivity Flat Bed CNC lathe machine stay a foremost choice. We provide three different models of DMTG flat bed CNC lathe in imported CK E series which vary in specifications and performance. Our tools are made of tested higher grade materials thus industries can rely on them for long term application.   Features   3 Jaw Hydraulic Chuck Manual Tail Stock Live Center,Dead Center Oil Gun 6 Station Turret Spanner & Allenkey Set Foundation Bolts, Spanner nut(6 Pcs.)  

• Input System: Metric / Inch
• Control of Axis: Simultaneous axis
• Inlerpolation: Linear, Circular
• Minimum Movement Command X: 0.010 mm
• Minimum Movement Command Z: 0.005 mm
• Tool Offset with Turret: 8 Nos (optional)
• Type Of Control System: PC Boned System

• Layout: Horizontal
• Power Supply: 230V, 50Hz
• Automation Grade: Automatic
• Power Source: Electric

We are offering Cnc Lathe Machine.

• Automatic Grade: Automatic
• Lathe Machine Type: Horizontal Lathe
• Layout: Horizontal
• Condition: New
• Accuracy: 0.005mm

Our product range includes a wide range of CNC Machine such as CNC Lathe Machine, CNC Turning Center and CNC Machining Center. Being perfectly shaped and swift movement of our organization, we are instrumental in manufacturing and supplying optimum grade CNC Lathe Machine. This machine is used to rotate work piece on its axis for turning work. Our offered machine is operated electronically with the help of controller to perform various operations such as Od Turn, ID turn, knurling,Threading etc. We offer this machine to our clients in number of technical specifications as per their choices. Features :Provide splendid speedRugged constructionDurability 

• Automatic Grade: Automatic
• Layout: Horizontal
• Brand/Make: NOVA

Dudhane Machineries (India) Pvt.Ltd. - Our company is counted amongst the foremost exporters, wholesalers and suppliers of cnc lathes machine in India.