Compressed Air Dryer Dealers in Pune

• Brand Name: Drytech
• Pressure: 10 kg/cm3

The presence of oil, moisture and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer or international Standard Organisation (ISO) or Pneurope recommendation has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine uptime, lower rejections, better product quality and above all considerable saving in energy.

• Dryer Technology: Refrigerated
• Warranty: 12 Months
• Frequency: 50 HZ
• Phase: 3
• Country of Origin: Made in India
• Dryer Horse Power: 16 HP
• Brand: DRYBOX
• I Deal In: New Only

• Usage/Application: Industrial
• Brand: Panair
• Drying Capacity (in cfm): 20 to 5,000 cfm
• Dryer Horse Power (HP): 10 HP
• Work Pressure: 4 to 14 kgf/cm2g

• Phase: Three Phase
• Material: Stainless Steel
• Country of Origin: Made in India
• Power Source: Electric
• Frequency: 50 Hz
• Warranty: 24 months
• Usage/Application: Industrial
• Automation Grade: Automatic
• Drying Capacity: 70CFM
• Voltage: 220 V
• Minimum Output Dew Point: -40 C

• Dryer Horse Power: 2-25 HP
• Material: Metal
• Power Source: Electric
• Maximum Pressure (in bar): 4-12 bar
• Dryer Brand: Atlas Copco
• Air Tank Capacity: 500-3000 L

The presence of oil, moisture and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer or international Standard Organisation (ISO) or Pneurope recommendation has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine uptime, lower rejections, better product quality and above all considerable saving in energy. Drytech Air Drying Unit-HD series (Heatless) type offers quality class of air desired as per various recommendations for different pneumatic applications. The stationary air drying unit with negligible maintenance, lesser operating cost and longer service life is the right selection for pneumatically operated machines which needs purified compressed air.   Salient Features :•  Operating on ADSORP principle; Hence prevents entrainment of moisture in the pipe line however     long is may be.•  The most compact skid mounted unit supplied in READY FOR USE state by connecting compressed     air at inlet and outlet.•  The stationary working system and requires negligible maintenance.•  Assured atmospheric dew point equal to (-) 40 deg. C. or (-) 70 deg C as required.•  Ideal purging as per desiccant manufacturers instruction for regeneration.•  Lesser pressure drop in total unit.•  Modified purge silencer causing less noise.•  Designed for Indian atmospheric condition.•  Easy for installation and commissioning.Sequence of Drying Operation.It is as per following three stagesPrefiltration :The dust particles, condensed oil and moisture in liquid droplets and aerosol from is per-filtered by set of pre-fine filter combination, The Compressed air with only vapourised from of moisture is permitted to enter the desiccant bed tower.Drying :The Saturated Compressed air is dried in desiccant bed tower.Postfiltration :The dry compressed air is refiltered in after filter for removal of residual fine particles if any.   Heatless Air Dryers   Mini Dryer   Request a Quote     Operation :The complete ADU operates in following three modes.Drying Mode :The wet saturated compressed air coming from set of pre filters is led through one of the inlet valve (Operated by electronic timer) to the desiccant bed tower. The highly hygroscopic desiccant bed with sufficient air resident time due to proper velocity results in absorbing the moisture vapour and dries the air to desired level of dew point.Regeneration Mode :The small amount of dried air at almost atmospheric pressure is led through purge line to the saturated desiccant bed tower. The absorbed moisture in desiccant bed at earlier drying mode is desorbed in purged dry air and regeneration takes place.Pressurisation Mode :To avoid the pressure fluctuations at outlet of dryer, the regeneration mode tower is put in for pressurisation before it switches to drying mode. The entire operation is electronic timer controlled and automatic at various modes shown above for proper sequence and timing. The total cycle time is 10 minutes or 4 minutes as per timer selection for required dew point.

Energy conservation by heat of compression type compressed air dryer is a breakthrough in compressed air drying technology. The hot air from the oil-free air compressor at 120°c or higher temp, is used directly for regeneration of the desiccant bed in the compressed air dryer. After regeneration, this air is cooled down to 40°c in the water cooled after cooler and then it is dried in second tower. Thus the use of heaters is eliminated. For eg. In the 6 + 6 hrs. Cycle the hot air is fed for regeneration of desiccant bed for 4 hrs. And for balance 2 hr. Achangeover takes place where the air is first cooled in an after cooler, then dried and before going to the outlet, cools the regenerated desiccant bed, thus bringing it down to ambient temperature. this cycle is reversed for the next 6 hrs. Where the adsorber drying the air in the previous cycle goes for regeneration and vice versa. There is considerable power saving in these type of compressed air dryers and the dew point is also better than the refrigerated type of compressed air dryers . Main advantage of heat of compression type compressed air dryer is the energy conservation and heat recovery achieved which is being wasted in after cooler in the conventional air dryers is now used to reactivate the desiccant.

• Brand Name: Halward
• Usage: Removal of Moisture from Compressed air
• Minimum Output Dew Point: -20 C
• Dryer Horse Power: 1 HP
• Drying Capacity: 20 cfm
• Maximum Pressure: 4 bar
• Automation Grade: Automatic
• Dryer Technology: Refrigerated
• Dryer Type: Refrigeration Dryer

Heat less dryer works on the principal of absorption. Regenerative air dryers use desiccant media absorbs moisture contaminate from compressed air. The desiccant media can be regenerated by purging air and remove moisture it collect and remove again and again. So the dryness of the compressed air achieved up to atmospheric -40'c dew point. The traditional refrigeration type air dryer does not provide sufficient air quality required for special applications. Guru regeneration heat less dryer contains smooth uniform achieved alumina balls size t\at prevents channeling of compressed air flow, which maintains low bed velocities. This maintains air contact time for efficient moisture removal and minimal pressure drops. Guru have electronic control timer for pneumatically pilot valves are chosen for long life and high air flow. A pre filter, oil removing filter, after filter offering purification to 5 micron can be specified purge loss and pressure drop are kept at a minimum resulting in lower operating costs.   Working Principle       During an operating cycle inlet air directed to pre filter, here moisture and dust particles are removed then air enters to oil removing filter here we remove flooded oil. As wet air flows through the desiccant tower bed the twin tower design of our dryers allows simultaneous compressed air drying and desiccant regenerated without interruption to the compressed air flow. At the end of the drying cycle the regenerated tower is re-pressurized and tower operation is reversed automatically. After tower change over wet inlet air is directed to the regenerated tower and the previously used desiccant is regenerated by the same process. A complete cycle of drying and regeneration is 10 minutes or 6 minutes timing is precisely controlled by Guru electronic timer.   Features   Applications Easy dry series designed for pharmaceuticals, powder coating, Spray Painting, CNC Machine, CMM Printing Application units etc.,   Range   • 5 cfm to 50 cfm- Easy dry series • 20cfm to 500cfm - Heatless dryer • Compact design   • Pre filter oil removing filter, after filters are standard   • Full instrumentation packages   • Counter flow drying and regeneration   • Low pressure drop less than 3 psi at rated flow   • Automatic re-pressurization   • Fixed purge orifice

• Certification: CE Certified, ISO 9001-2008 Certified
• Weight: 10-50kg, 100-150kg, 150-200kg, 50-100kg
• Color: Brown, Grey, Light White, Shiny Silver, Silver, White
• Voltage: 220V, 380V, 440V
• Condition: New, Used
• Power: 1-3kw, 3-6kw
• Warranty: 1yrs, 2yrs, 5yrs
• Application: Water Vapor Removing
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic

• Warranty: 12 Months
• Country of Origin: Made in India
• Drying Capacity: 20-1100 CFM
• Dryer Technology: Refrigerated
• Dryer Horse Power: 5 HP
• Brand: Kuber
• Maximum Pressure: 10 Bar

It contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system. Our Air Dryers remove the moisture to a level of 80 ppm(w) by using pressure swing adsorption technology. The wet air enters into one desiccant tower and gets dried by the high performance desiccant adsorbent. The dry air passes through check valves and post filter to the utility. A portion of dry air (depending on the operating pressure and required dew point temperature) passes through an orifice into the other saturated tower at near atmospheric pressure, liberates the entrapped moisture in the desiccant to the atmosphere and regenerates it for the next drying cycle. A reliable electronic timer controls the cycle and valve operations effectively thereby ensures continuous dry air output to the utility. Features: Proven trouble free valve design Rugged carbon steel construction Integerated pre & post filters Easy and flexible installation Simple maintenance Outlet air quality according to ISO 8573-1,Table 3,Class 2 & 3 Operating Range: Capacity: 100 to 10000 m³/hr Inlet air pressure 4 to 70 bar g Inlet air temperature: 10 to 60°C Pressure Dewpoint temperature -20 & -40°C Applications: Plant Air Painting process CNC Machines Hospitals Food & processing Textiles Leather Industry Automobile Industies

Refrigerated Air Dryers, rotary screw air compressors, Air Receivers

Desiccant Dryers, Driven Robot, Stainless Steel Oil Heater, Drum Flaker

Reliable, High-Quality Air: Unique, worldwide experience in supplying for the most demanding applications. Nothing but top end components. Robust design (large desiccant overfill, optimum aspect ratio, low air speed). Built to perform across a wide range of conditions. Tight control and monitoring. Based on years of extensive research and continuous development. Designed using state-of-the-art tools and facilities

Heatless Air Dryer, Refrigerated Air Dryers, Refrigeration Air Dryer

Refrigerated Air Dryers, Air Compressor, Air Receiver Tank, Line Filters

HEAT LESS AIR DRYER, Oxygen Generators, Nitrogen Generators, gas systems

Compressed Air Dryers, purification systems.

Desiccant Dryers, Batch Dryer, oil dryer, Hopper Dryer, Biomass Dryer