Cooling Towers Dealers in Bhosari, Pune

-Cooling water treatment Chemicals -Cooling tower descaling

• Features: Non-interrupted performance , Easy maintenance , Tough built.

STANDARD RANGE : 22.5 KcalHr. TO 1 LAC KcalHr. APPLICATION :- REQUIRED FOR COOLING COPPER ELECTRODES , TRANSFORMERS SECONDARY,THYRISTORS STACK, HYDRAULIC OIL

• Type: Descalent Chemicals Cooling Towers
• Tower Material: FRP
• Tower Type: Induced Draft
• Supply Phase: Three Phase
• Tower Design: Counter Flow

All those who are looking for a reliable name offering Descalent Powder can get in touch with us! We have invested a large amount for developing all-the-in-house storage facility that is managed and maintained by our diligent professionals. Also, it keeps us free from stock-out situations.Aquacool 8003 : Composition /information On Ingredients It Is Balanced Formulation of Sulfamic acid (6%), Hydrochloric acid (5 %) Sodium dichromate (0.5%) and Corrosion inhibitor (0.5%). Hazards Identification Important Hazards - Toxic. Health Hazard - Toxic if swallowed. Causes severe burns in contact with skin. Causes severe irritation on inhalation. Causes severe irritation or burns in contact with eyes. First Aid Measures Inhalation : Inhalation - Move to fresh air. Artificial respiration if required. Seek medical attention. Skin Contact - Wash immediately with plenty of water. Remove all contaminated clothing immediately. Seek medical attention. Eye Contact - Flush with plenty of water. Keep eyelids apart. Seek medical attention. Ingestion - Do not induce vomiting. If conscious then only give 2 -4 cupfuls of water. Seek Medical attention. Physical and Chemical Properties : Form - Liquid Colour - Greenish-Brown PH - 0.5 (250C) Water Solubility - 100 % Odour - Pungent Specific Gravity - 1.12 (250C) Boiling Point - 1090C Stability and Reactivity : Condition to Avoid - Keep away from heat and ignition. Contact with metals may evolve flammable Hydrogen gas. Materials to avoid - Highly reactive with strong bases. Incompatible with materials like cyanides, Sulfides, sulfites and formaldehyde Hazardous decomposition - Thermal oxidative decomposition produces

Jet Spray Cooling Tower

Dry coolers work on the principle of convection and conduction to dissipate heat from process fluid to the air stream created by the fans mounted on it. By suitably selecting the tube material, we can use a dry cooler to effectively cool process water, chemicals or any heat transfer fluid,even if it is corrosive or contaminated with particulates.

electric motor cooling tower, Electric Motor, Flange Mounted Motor

Operation Principle Thermax Dry Coolers are also known as Radiators/Remote Radiators, Fin Fan Coolers, Air Cooled Heat Exchangers. They work on the principle of convection and conduction to dissipate heat from process fluid to the air stream created by the fans mounted on it. By suitably selecting the tube material, we can use a dry cooler to effectively cool or condense process water, chemicals or any heat transfer fluid, even if it is corrosive or contaminated with particulates. Dry coolers are closed loop systems which eliminate any kind of water loss and thus eliminating the continuous requirement of make-up water. Being a closed loop circuit, the water treatment cost is also negligible as compared to conventional evaporative cooling towers. Construction Thermax offers two types of Dry coolers - 'V' type and 'H' type based on the application or requirement. The fans can be mounted according to induced draft or forced draft type, depending on the application. The fans are of direct drive type, but options with gear box or belt drive are also available. The tubes which carry the process fluid are of copper, carbon steel or stainless steel with aluminum fins to maximize the heat transfer. We offer two variations in fin configuration based on the operating fluid temperature such as- Continuous fin and High Fin tube bundles to optimize selection. The side panels are epoxy coated which makes it corrosion resistant and gives it an excellent appearance. Product Range Fluid Temperature: 30°C to 240°C with a minimum approach of 5°C above dry bulb temperature. Cooling Capacity range: 200 kW onwards Thermax can offer custom built dry coolers based on the application and nature of working fluids. Advantages of Thermax Dry coolers Modular designs of Thermax Dry Coolers helps in space optimization Highly efficient fin to tube heat transfer Zero usage of water which results in Zero water wastage: Due to closed loop operation and no evaporation No water treatment plant: As it doesn't require continuous supply of makeup water Negligible maintenance cost: As water treatment, makeup water and replacement of fills not required No periodic cleaning requirement Separates process side from any contamination due to closed loop system Plenum made of Epoxy coated galvanized iron, enhanced corrosion resistance Applications across Industries Steel – Electrical Arc Furnace / Induction furnace cooling Refinery & petrochemicals – Reactor column cooling Rubber - Roller cooling Polyfilm – Chill Roll Cooling Independent Power stations – Cooling of engine jacket water, lube oil and inter-stage cooler Plastics –Cooling of injection molding machine Textiles – Condensation of process vapour Refrigeration / Air conditioning – As condenser for air cooled chillers Power industry- Turbine lube oil cooler/ turbine intercooler

Frp Cooling Tower, Toilet Cabin, Road Safety Equipments, FRP Dustbins

Cooling Tower, Mobile toilet, toilet van, Wooden Door, lining, Boat

Cooling Towers, Acoustic Enclosure, dismantle type generator

Cooling Towers, Boilers, water treatments plant, Water Treatment Chemicals

Cooling Towers, anti-vibration mounts for machines

Cooling Tower, Blower Fan, clean room equpment, amc contract services

Cooling Towers, Scrubbers, Roof Ventilators, Dust Collectors, Cyclones