Data Loggers Dealers in Pune

• Display: 7 Segment LED Display 3 X 14.2mm (0.56”)
• Power Source: Electric
• Automation Grade: Automatic
• Application: Humidity Monitoring
• Probe Inputs: RH Sensor (4-20mA)
• Relay Outputs: Relay , Alarm - 10A
• Serial Output: Yes (RS485)
• Power Supply: 24Vac/dc Standard
• Humidity Range: 0% to 100%
• Mounting Type: Panel Mount, Panel Cutout : 71 x 29mm

• Brand Name: i-matrix automation
• Warranty: 3 years
• Country of Origin: india

Energy Management System Machine Monitoring System PLC Remote Monitoring System Production Monitoring System

The DLx-MUXDIAG-II is a compact data logger which is particularly well suited to "on road" applications It is used to log the data flowing simultaneously on 1 CAN High Speed or Low Speed link, 1 CAN HS link, 2 ISO9141 links, 2 LIN links and on 2 ANA/binary inputs. Supplied with a memory capacity of 16GB (expandable), a wired remote control and the Exxotest Data Logger Control app for Windows OS, used to configure the data logging and restoral sequences. The range of pinout options on the 16-channel, "OBD" SAE J1962 connector, controlled by the allocation of the non-standardized channels, is covered by several versions of the USB-MUXDIAG-II product, each of which is tailored to the various manufacturers: PEUGEOT, CITROEN, RENAULT and FORD.

• Brand Name: Viltrus

RAY-3 data logger is dedicated for measuring of analog (voltage, current, resistance) parameters, for tracking the status of discrete inputs, formation of discrete output signals, archiving and sending data to local users/server over RS232/RS485 or USB and to remote users/server over Ethernet or/and GSM/GPRS/EDGE or UMTS/HSPA+ using Modbus TCP/IP protocol.   Technical Features : Possibility to choose interfaces: M-Bus, RS232, RS485, USB, GSM/GPRS, Ethernet, Analog IN/OUT, Discrete IN/OUT Supported protocols: Modbus RTU, Modbus TCP/IP, M-Bus, IP, ICMP, UDP, TCP, DHCP, PPP, ARP, SNTP, IEC60870-5-104:200 DynDNS, FTP server, FTP client, DNS client and transparent Independent data log with real time stamp (Real Time Clock) Alarm limits tracing of analog and discrete inputs, logging in event archive, warning about alarms over GSM/GPRS/EDGE or UMTS/HSPA+, Ethernet and by sending SMS Reading data from M-bus meters (heat, water, gas, electricity...) via M-Bus interface Alarms status of analog and discrete channels fixing Data from local device reading over RS232/RS485 (using Modbus RTU protocol) or USB  Remote communication over Ethernet or GPRS/GSM / 3G Up to 6 analog inputs (voltage, current, resistance, PT100) Up to 2 analog outputs Up to 4 discrete inputs (contact / impulse / alarm) Up to 2 discrete relay outputs Galvanically isolated interfaces and power supply Additional special transparent protocol data transfer Internal battery ensure at least 1 hour operation, after power fail   http://www.viltrus.com/data-logger-ray-3/

• Brand Name: Planet Automation Systems

We offer Multi Channel Weight Data Logger , Multi Channel Weight Data Printer. Multi channel weight data logger and printer is panel mounted weight controller , this controller is used to control weighing quantity up to four material, it is having four relay output for controlling conveyor , solenoid valves motor etc. this controller is having set point facility in which we can set required weight and infly , also it is having printing facility in which we can printing actual material field in hopper , this controller is wildly used in industrial as well as construction equipment, it is having good stability on industrial envier mental, and this indicator is made for sites and industrial use, Use 1) Concrete Mixer weighing and weight controlling 2) Conveyor and hopper Weighing and controlling 3) Batching of material

• Display Type: Digital
• Type: Portable
• Application: Industrial
• Indicator: Temperature Indicator
• Durability: Long Life
• Surface Finishing: Polished

• Measurement and documentation of temperature & humidity values in the environment and processes• Data transfer possible by wireless and ethernet connection• Automatic data collection and safe central data storage• Alarm when limit values are exceeded• Additional parameters over 0/4-20mA, 0-1 /5/1 OVDC can be integrated• Data storage capacity per probe up to 6000 readings and 40,000 per channel in base station• Possibility of integration of any external sensor

The company is counted amidst the leading Manufacturers, Exporters and Suppliers of advanced Wireless Tyre Pressure Monitoring System in India. Our Wireless Tyre Pressure Monitoring System is known for its quality and most recent technology. Our Wireless Tyre Pressure Monitoring System is available at reasonable prices.

• Accuracy: + -2 percent
• Features: LCD to show some logging information easily,Download collected data through PC s USB
• Model Name/Number: DL 162
• Type Of Data Logger: Wireless Data Logger
• Usage/Application: Industrial
• Interface: DIGITAL
• RH: SELECTABLE
• Measuring Cycle: 1 sec to 24 hours
• Measurements Range: 0 to 100 percent

• Brand Name: Aster
• Model Number: DL - 650
• Place of Origin: Pune

Dl-650 is a device that can read parameter from any of our instruments or controller with rs-485 facility and store the data. It has an inbuilt flow meter function. Features user friendly suitable for data acquisition from 10 different instruments through rs485 user settable frequency for data logging frequency is settable from 1 min. To 999 min. Can be used as flow rate indicator, totaliser comes with 4 gb sd card data from memory card importable into excel format with date & time stamp technical specification: physical dimensions - 105 x 105 x 120 mm 92 mm x 92 mm (panel cut out) enclosure - abs weather proofip - 65 mounting - fieldpanel display - 16*2 alphanumeric lcd programming using front panel keypad input - rs-485 ip orand from flow sensor input voltage - 230 v.a.c.,5060 hz

• Type: Data Loggers
• Material: Aluminum, Cast Iron, Copper, Plastic, Stainless Steel
• Color: Brown, Grey, Maroon, Red, White
• Application: Logging, Monitoring
• Display Type: Digital
• Power Source: Electric
• Feature: Accuracy, Durable, Light Weight, Low Power Comsumption
• Automation Grade: Fully Automatic, Semi Automatic

• Product ID: 3935
• Category: Barkey

The Multi point data logger (8 channels maximum) can be used for recording, printing and monitoring of the data from a number of instruments in a Blood Bank. Active storage of equipment control records can be made on this unit and print can be taken for the same. Blood center equipments like Blood Storage Refrigerators, Platelet Incubators, Plasma Freezers, Refrigerated Centrifuges, Ultra Low Deep freezers etc. can be connected to one data logger and can be monitored by Blood Center staff at a centralized location. Microsoft Windows based software allows Data stored in the unit to be transferred to PC via RS 232RS 485 port.

We are a leading data acquisition system manufacturer, exporter and supplier located in india. The data acquisition system offered by us is designed and developed to monitor vehicle fuel characteristics in different atmospheric conditions. Our data acquisition system is a robust real time data control system that can be used in any atmospheric condition. We manufacture data acquisition system using the lab view, ni cfp. In this data acquisition system server application will run on compact file point target and client application will run on pc. displayssettings : cascade ratio, set point for reformer temperature, sp for alarm reformer, set point for alarm fuel cell battery : 12 stack cell voltages (current with 75 ohm resistance) reformer : 6 reformer temperature and flow control valves fuel cell : 12 stack temperaturesattributesreliable performanceflexible connectionssturdy constructioneasy to operatecompact size 1) setting 2) battery 3) reformer 4) fuel cell process description first all channels are acquired after every 1 second and displayed. The frequency of logging is settablewhen we press start control loop execution gets startedall the temperature and voltage (current with 75 ohm resistance) is acquired andstored on host pcas per speed setting pid control will control the flow of fluentcommunication link is continuously monitored. If it gets broken cfp will start executing application on its memory (real time target). At that time data is storedon cfp memory with fixed 1 minute intervalonce the link is established again, the cfp memory is flushed out and the data was dumped on the host pc conclusion more than conventional system, this system made it possible to obtain the in real time operation with facility to perform analysis on the acquired data. Only ni platform made it possible for us with in record time of 1 week.

Baker provides a wireless data transfer system to transfer reading from Baker digital instruments and read out units to a centralized PC. FEATURES: RS232 compatible Baker electronic measuring instruments, each equipped with a Wireless Transmitter (WT), can be interfaced to a Wireless Receiver (WR) at PC end Small and compact wireless modules, easy to use License free operating frequency (2.4GHz), ISM (Industrial Scientific & Medical) frequency band RS232 interface Wireless communication up to 250Kbps In-built network security like: 128 bit AES (Advance Encryption Standard) Encryption, 16 bit customized Network ID Supports Mesh network topology Transmission range 100 meters, this depends on environment and clear line of sight Transmission range can be extended using active Baker instruments fitted with Wireless Transmitters or Wireless Repeaters (WRP) Very high receiver sensitivity and low power operation NOTE If clear line of sight, between antennas of WTs and WR is interrupted, then one or more WRPs will have to be introduced Number of WRPs that will be required for a networking project, cannot be ascertained at the beginning, and can be fully determined only during installation and commissioning

Data for max 120 events can be stored. Real time clock for data logging. Groups of 20 batteries provide isolation for individual rectifiers. MODBUS party line connectivity to central computer. RS 485 BUS allows cascading up to 255 data loggers on a party line. Elaborate safety arrangements, short-circuit protection. Salient Features: Wide range of battery voltages i.e. +/- 3V to +/- 20 V. Isolated Analog input (not between channel) DIN Standard modular design provides upgradeability from 20 channels to 440 channels. Data logging cycle time based / event based / foot switch select.

• Features: Sensitive, Resilient, Economical, Longer life, Lower maintenance, Durable.

• Display: 20x2 back light LCD
• Input: Rtd Pt100 (3wire),0-20mA, 4-20mA,Thermocouple J,K,R,S,T,B,E or Keyboard for each channel
• Channels: 32 Channels in step of 8 channels
• Logging Time: Programmable through keyboard from 1 to 240 second or minute
• Alarm Output: Common relay output for external ALARM indication - Optional
• Printer Port: Centronics compatible parallel printer port for DOT matrix printers only
• Serial Port: RS485 / RS232 port with MODBUS RTU protocol for on-line communication OR proprietary ASCII Protocol for off-line communication
• Data Logging: Memory capacity of 1700 readings per channel for 32 channels with Real Time Stamping. ASCII Data file transfer of Logged values to PC.Optional batchwise logging with 11character batch no.
• Special Feature: 16 point linearisation, engineering units, tag names, Hi/Lo limits for each channel
• Cabinet: Panel mounting type. Bezel: 180 x 305mm (H x W) Depth: 300mm Cutout: 180 x 262mm (H x W)

In the course of operation, keeping track of trap performance and repairingreplacing leaking or waterlogged trap becomes unfeasible due to the large number of traps installed.

• 4 universal inputs ( mv, mA, RTD, T/C )• Internal 18 Bit ADC for Better Resolution of    measured parameters• In built Sensor excitation voltage generation• Real time data storage with respect to Date &    Time Stamp• Data storage of upto 1 Lac Samples• User Friendly Multification Keypad & 16 X 2    Alphanumeric LCD display for easy Man Machine    Interface• Licence free Wireless communication with    communication distance of :» 500 mtrs » 1.0 kms » 2.5 kms• Up to 64 Units can be connected to a receiver in a    single network• Internal Real Time clock with battery• Optional GSM / GPRS communication facility for :» SMS Alerts » Data on Request » Web connectivity• Customised / Standard PC based software for :» Centralised monitoring of the plant» Long term data storage» Exporting Data to Standard formats & graphical    analysis» Auto emailing the reports     APPLICATIONS :• Production, Quality Control• Research & Development• Laboratories & Hospitals• Server Rooms• Cold chain monitoring for food Industry• Monitoring HVAC & Building Automation, Deep    Freezers, Hot Ovens, Furnaces etc.

Aeron's data logger is a versatile telemetry device for data collection from remote sensors. It has analog, digital and counter type inputs for interfacing with various type of sensors. It works on GSMGPRS technology to send data to sever for real time monitoring and storage.

• Application: Industrial
• Brand Name: Microverse
• Available models: Wired and wireless

• No of channels: 4, 8, 16
• Inputs: T/C, Pt100, 4-20 mA
• Operating modes: Auto, Manual, Program
• Programming Keyboard: 4 Keys membrane

Real Time Data Logging products from ESD are know for its reliability. Ever since it was first introduced in the market in 1996, there has been many enhancements carried on it. The PC end software has recently undergone a major revamp. Now get data output in Excel, PDF, Graphs exported to images. All this with compact design, excellent user-friendly software and robust programming makes ESD Data Loggers best in the class product.

• Weight: 56g
• Warranty: 2 years
• Model: DLS-W
• Max number of inverters: 1
• Data collection intervals: 5 minutes
• Data interface: UART:9600bps
• Preferences setting: Web server
• Firmware updates: Wireless
• Data access: Remote server
• Input voltage: DC 5V
• Working current: 130mA@5V
• Protection class: Ip65
• Dimension: 118mm*43mm*43mm
• Inverter communication: 4Pin
• Remote communication: WiFi (802.11 b/g/n)
• Communication rate: 9600bps
• WiFi frequency: 2.412GHz-2.484GHz
• WiFi communication range: 100 m in outdoor open area without obstruction
• WiFi transmitting power: 802.11b: +20dBm (Max)802.11g: +18dBm (Max)802.11n: +15dBm (Max)Configurable by users
• WiFi receiving sensitivity: 802.11b: -89dBm802.11g: -81dBm802.11n: -71dBm
• External antenna: I-PEX antenna
• Features: Quick installation and easy operation, Enabling local and remote monitoring, WiFi conmmunication supporting remote monitoring, Easy visualization of data and other information via Internet