Deburring Machine Dealers in Pune

Our company is engaged in providing Deburring Pencil Brush of very high quality. The design of our range of Deburring Pencil Brush assists in effective functioning. The Deburring Pencil Brush manufactured by us is used for deburring corner, grooves slots, etc. The materials used to manufacture the Deburring Pencil Brushes include SS, Carbon Steel and Brass, Nylon. About Deburring Pencil Brush Range   Diameter: From 6 mm to 50 mm Effective functioning Cost effective Durable material

• Material: Stainless Steel
• Shape: Round
• Color: Grey
• Texture: Abrasive
• Outer Diameter: 0-300 Mm
• Bristle Length: 0-2 Inches

• Loading Indexer: 14 stations with stack bars
• De-burring Rotary Indexer Table: 10 station Indexer with collets
• Component Transfer Unit: Pneumatic Actuated
• Cycle Time: 13 secs / component

Independent addition to the GX program for the deburring of steel and stainless steel Work pieces with wire brushes also available with machine base.   Benefits: Robust AC motor provides grinding with steady speed Speeds optimal for metal working: GX 75 with 3,000 rpm; GX 75 a2H switchable to 1,500 or 3,000 rpm Processing suiting the material by self-adjusting belt tension Comfortable operation by adjustable work level, height-adjustable support for plane grinding, and easy belt adjustment Great work reliability because of sturdy machine base and solid cutting tble Connector integrated for dust extractor (Ø 90 mm) Detachable swarf collector.

Patented RotoDrive Crancked Countersinks which allows the user to chamfer holes, deep holes and continuous rotation for fast and accurate chamfering. If a hole is drilled into a work piece, usually a rough edge will appear around the top of the hole. Noga countersinks can remove these rough ridges and put a chamfer between the hole and the surface into which the hole was drilled. Noga Countersinks can also create a deeper recess into a hole, in order to prevent a flat head screw from projecting over the surrounding surface. Noga countersinks are hand deburring tools normally used for producing a small chamfer, but may also be gripped in a drill press to create deeper recesses. Noga Countersinks consist of three parts: A blade of high speed steel, a holder, and a handle. The Noga Countersinks are used like a screw-driver, pressed onto the hole, and rotated clockwise. However, another method to perform the rotation is offered with our patented Noga Countersinks Rotodrive system. In this case the blade-holder has the form of a crank, which enables the user to perform continuous rotations. With the Rotodrive system, Noga Countersinks also offers External Countersinks, with which rough edges can be chamfered on the outside of tubes and round bars. For external and internal light chamfering, Noga makes patented Reversible Countersinks. If a cross hole was drilled into a tube, this tool can be inserted into the hole, then a blade can swivel out to deburr the inside break-through, by rotating the tool clockwise and anticlockwise. Contrary to other Noga countersinks, this tool can create good chamfers also on curved surfaces, because its cutting edges will follow exactly the contour of the hole. As well as on the inside of cross holes, they can also chamfer the outside burrs.

• Shape: Round
• Type: Gum Powder, Gur Gum
• Shelf Life: 12 Months
• Grade: Food Grade, Industrial Grade
• Color: White
• Purity: 99%, 99.99%
• Form: Powder
• Packaging Type: Aluminium Foil, Paper Pack, Plastic Bags
• Ash: 0-1%, 1-2%
• Moisture Content: 0-10%, 10-20%
• Protein: 5-10%
• Packaging Size: 0-25Kg, 100-200Kg
• Water Insoluble: 0-5%, 5-10%
• Type Of Powder: 0-200 Mesh, 200-400 Mesh
• Country of Origin: India
• Brush Type: Circular
• Bristle Material: Carbon Steel Wire
• Bristle Stiffness: Hard
• Weight: 500 g - 1 kg

Chamfer & Deburring prevent nicks type damage during handling,Chamfer & Deburring prevent Heat Treatment Distortion,Self centering tool make equal chamfer at both end,Rolling type tool looking like a shaping Cutter gives better tool life,Tool construction compensates for width variation of face up to 0.20 mm,Automatic tool hunts if gear does not engage with tool,The machine has two slides, one horizontal slide for chamfering operation & one vertical slide for deburring operation,After setting, the cycle is automatic i.e. only loading unloading is manual,Max work dia 250 mm,Min work dia 10 mm,Max face width 105 mm

• Max work dia: 250 mm
• Min work dia: 10 mm
• Max face width: 105 mm
• Min face width: 10 mm

Self centering tool make equal chamfer at both end. Rolling type tool looking like a shaping Cutter gives better tool life. Tool construction compensates for width variation of face up to 0.20 mm. Automatic tool hunts if gear does not engage with tool. The machine has two slides, one horizontal slide for chamfering operation & one vertical slide for deburring operation. After setting, the cycle is automatic i.e. only loading unloading is manual

• Packaging Type: Box
• Color: Red and Black
• Country of Origin: Made in India
• Usage/Application: Industrial
• Brand: RID-BURR
• Blade Material: SS

• Features: High strength, Rust resistant, Competitive price, Low maintenance, Longer life service .

deburring machines, buffing machines, Polishing Machines, Spm Machines

Deburring Tools, air angle grinder, pcd insert, Collet Stud

Deburring Tools, Cutting Tools, Broaches, Cutters

Shaviv Metal Deburring Tools, Abrasive Discs Sheets, Abrasive Belts

Automatic Deburring Machine, Grinding Machines, grinding planetary machine