Demineralisation Plant Dealers in Shivane, Pune

• Automatic Grade: Automatic, Semi-Automatic
• Type: Ions Exchange Plant
• Voltage: 380 V
• Capacity: As per customer
• Water Pressure: 0.18-0.6 MPa

• Body Material: Mild Steel, Stainless Steel
• Power: 0-3 Kw, 3-5 Kw
• Power Source: Electric
• Voltage: 220, 360 V
• Control Type: Automatic, Semi Automatic
• tank type: Vertical

• Brand Name: Apram
• Material: SS,FRP
• Voltage: 220 V
• Frequency: 50 Hz
• Capacity: 3 t/H
• Salt Rejection Rate: 99.5%

OIL FILTRATION PLANTS CAN BE SUCCESSFULLY MODIFIED & AUTOMATED FOR VARIABLE FLOW RATE. A brief description is given for your reference.   INLET & OUTLET PUMPS : The pump will be driven by suitable sized AC drive to control the flow rate. By using these settings we can control the flow rate from i.e. If Plant is 6000 LPH then it will vary from 1000 LPH to 6000 LPH. HEATER TANK : It is also necessary to select proper heat output for variable flow rates. This will avoid localized heating of oil for small flow rates.This section will incorporate PLC which will control the heaters.PLC will be used for control of heater groups, once certain flow rate has been selected, heaters will be configured automatically to suit that flow rate. This control panel will be designed for reliable & trouble free operation.By using the above system the major benefit is to have a single machine instead of different models for different capacities. In this case, flow rate can be kept variable from 1000 LPH to 6000 LPH. Power saving of 30% can be achievable by using this system as compared with traditional oil filter system designs.   OPERATIONAL & PROCESS AUTOMATION Press 'START' to start the oil filtration process. All airing valves, oil inlet & outlet valve will close. The rotary vacuum pump will start to achieve coarse vacuum. After achieving coarse vacuum level, which the 'Vacuum Switch' will sense. After achieve the desired level of fine vacuum in the plant, oil inlet valve & intermediate valve will open and the oil inflow will start due to vacuum inside the plant. The flow switch provided in the suction line of the plant will sense the oil flow & that signal will start the oil inlet pump. In case, the incoming oil flow is not there, HMI on the control panel will display 'LOSS OF OIL', with annunciation. One pressure release valve, provided across the inlet pump will control the excessive pressure rise in the plant. As oil is filled in the degassing chamber, the high level float switch will operate & that will put 'OFF' the inlet pump & start the outlet pump. The starting signal to the outlet pump will open the outlet valve. As the oil level in the degassing chamber comes down, the high level float switch will start the inlet pump, again. Thus the oil circulation through the filtration plant will start. After the continuous oil flow through the plant, the heaters will be 'ON'. Temperature of oil will be controlled by TIC (Temperature Indicating Controller) & one safety thermostat will control the accidental temperature rise. Thus the hot oil circulation through filters & degassing chamber will start resulting in the effective separation of solid impurities as well as dissolved moisture & gases from the oil. During the filtration process, the necessary interlocks provided will avoid malfunctioning of the plant, like   1. High level float switch will stop the inlet pump, to avoid flooding of the degassing chamber. 2. Unless the inlet pump is 'ON' the heaters will not be energized. 3. Low level float switch will stop the outlet pump to avoid dry running of the pump During the filtration process, the moisture meter, installed in the inlet line, will display the moisture content in PPM, continuously, on it's indicator, on the control panel. Once the desired PPM (moisture) content is achieved, the moisture meter installed in the inlet line, will shut down the plant, automatically. This plant will also run with Manual Interference means with Manual Operation.

Demineralization or Deionisation is the process of removing mineral salts from water by using the ion exchange process. With most natural water sources it is possible to use Demineralization and produce water of a higher quality than conventional distillation. Demineralization plants for industrial process water applications, with inherent design to conserve water, and save costs. They are available in different sizes and materials, manually operated or fully Automatic, & ready to install & are available as standard models or custom built versions for specific needs.

This plant is designed compact effluent treatment system. It is a complete system, which combines with sedimentation tank, and biochemical tank.

• Automatic Grade: Automatic
• Voltage: 440 V
• Material: SS Etc.
• Type Of Machines: Sand filter.carbon filter
• Plant Application: Drinking
• Frequency: 50 Hz

• Weight: 5-15 Ton
• Voltage: 220 V/50 HZ
• Automatic Grade: Semi-Automatic
• Degree of Cationic: 8-10%
• Brand/make: neel techno

Every swimming pool needs an efficient Filtration Plant, Filter Systems, Accessories & Equipment to keep the pool crystal clear and hygienic swimming pool water.We are leading manufacturer, importer and supplier of wide range of swimming pool filtration plant, filter systems, swimming pool accessories and equipment which include Sand Filter, Cartridge Filter, Pool pumps, Pool Skimmers, Pool Shell Equipment, Overflow Grating of different sizes and Color Shades etc. SWIMMING POOL FILTRATION PLANT & FILTER SYSTEMS The hygiene of pool water is the main concern of a pool owner and its users. Since many skin diseases can be contacted through the water it is ensured that regular filtration takes place by the filter systems. Comprehending the same requirement, we have in store for our clients a wide range of swimming pool filter systems, which are extremely instrumental in maintaining the hygiene and sanitation of the pool water. The distinguishing features of our range of swimming pool filters are as follows: Low maintenance Ideal filtration rate Low media migration Simple usage We are versed in all aspects of modern filtration vessels, matching them perfectly for the job required, within the design constraints of the plant room, and ensuring that the facility can still be operated in the event of planned maintenance or an unforeseen breakdown, with the plant operating at reduced capacity. Chemical control equipment is tested in our own workshops before being transferred to site to ensure a smooth, trouble-free installation without delays. We offer a range of monitoring options for our systems including remote on-site, remote off-site. A good filtration plant is necessary complement to every pool. Pool filter systems is used for capturing the coarse impurities in the water and its running helps to keep the water clean, and also extend the life of the pool.

Nano Filtration Plant, Industrial RO Membranes

filtration plants, Swimming Pool, Underwater Lights, Swimming Pool Pumps

Demineralization Plant, Packaged Drinking Water, drinking water bottle

Water Filtration Plants, Biogas Plants, Demineralization Plants

Global Aqua is one of the top DM plant manufacturers in pune. When the dissolved solids in the water are to be removed, Demineralisation is used many times. The DM plant essentially must have minimum two resin columns, Cation and Anion. The cation unit contains resins, which are in H form and Anion resins in service cycle are in OH form.

Demineralisation Plant, Biogas Plants, Biogas Balloon, biogas engine

Ultra Filtration Plant, Dissolved Air Flotation System, Belt Dryer

Demineralization Plant, Reverse Osmosis Plant

Nano Filtration Plant, Arsenic Removal Filter, Propeller agitator

frp ro plant