Detective Device Dealers in Pashan, Pune

This next-generation Refrigerant Leak Detector D TEK Select uses an innovative infrared absorption sensing cell that is extremely sensitive to all refrigerants. D-TE K Select maintains that sensitivity over time for consistent, accurate and reliable performance. The sensing cell lasts for approximately 800 hours. The Latest D TEK Select is also improvised with a charging status indicator, sensor failure indication, and NiMH (nickel metal hydride) batteries. All in an easy-to-use unit with the quality and durability How it Works At the heart of the D-TE K Select Refrigerant Leak Detector is an infrared absorption filtometer. It consists of a sampling cell with an infrared source (or emitter) at one end, an infrared energy detector at the other end, and an optical filter in between them. Like the visible light we see, infrared energy is part of the electromagnetic energy spectrum. Most materials absorb specific and known wavelengths of infrared energy. The particular wavelengths of energy absorbed by a material are known as its absorption spectra. All refrigerants have similar absorption spectra in the range of 7.5–14 micrometers. The infrared source (emitter) creates a high-intensity stream of energy incorporating all wavelengths in the infrared spectrum. The stream passes through the optical filter, which blocks all wavelengths except those that refrigerants absorb. The filtered infrared energy strikes the detector and causes it to heat up. When refrigerant is drawn through the sampling cell by the internal pump, some of the infrared energy is absorbed by the refrigerant. This causes a decrease in the amount of infrared energy reaching the detector and a corresponding drop in the detector’s temperature, which triggers the D-TE K Select to alarm. This whole process takes a fraction of a second. FEATURES AT A GLANCE 0.10 ozyear (3 ga)sensitivity Sensitive to all refrigerants, including R-22, R-134a, R-404a, R-410a, R-507 (AZ-50) and all CFCs, HCFCs and HFCs.800-hour infrared cell life for low cost of ownership.Infrared cell does not weaken over time, so response remains consistent and accurate.Infrared cell cannot be overloaded or “poisoned” by exposure to large amounts of refrigerants.High-efficiency air sampling pump provides quick response and quick clearing (“zeroing”).On-board diagnostics indicate charging status and warn of low battery or infrared cell failure.N iMH power stick is environmentally friendly, won’t corrode, and provides greater charging capacity.Enhanced filter design for superior filtration and resistance to contaminants.Ability to run off AC power adapter.

• Size: 3 Inch, 3/4 Inch
• Application: Automotive
• Color: Metallic
• Finishing: Polished
• Feature: Durable, Hard Structure
• Working Pressure: 1.5cm Sq, 1cm Sq
• Coverage Area: 0-2ft, 2-4ft

We are a well-known Manufacturer, Exporter and Supplier of Vehicle Detection System in India.  M-GAGE­ Vehicle Detection System reliably detects the presence of large metal objects—such as a car, truck or railcar even when the vehicle is not in motion. We have a quick transit system, which helps in time-bound delivery of our Vehicle Detection System.

Photodetector is the sensor that could convert the optical radiation signal to the electrical signal, which is made from photoemission material. Most of the photodetectors have strong spectral selectivity in a certain Spectrum area. Therefore, for one photodetector, different wavelengths have different spectral responsivity. The spectral responsivity is an important parameter index for characterizing the photodetector performance. And for the photoelectric material researching, the effect of some characteristics of the material itself such as doping density, lattice imperfection, absorption coefficient and minority carrier diffusion length on the photoelectric response capacity and the quantum efficiency could be obtained by measuring and analyzing the spectral responsivity data. That is very important and helpful for choosing better material and processing improvement.

Great solution to protect doors, windows or large openings from intruders. Creates a curtain at the same time allows you to use the room without triggering an alarm. Battery life of more than 1 year. Low battery and panic alarm transmission to the control panel.   Visonic Wireless Curtain Motion Detector Clip MCW Clip MCW is designed for the protection of doors, windows and all-glass walls. Compatibility with members of the PowerMax family and all Visonic PowerCode wireless panels and receivers. Fast and easy installation. Clip MCW provides full perimeter protection while allowing consumers to normally and freely use the premises without triggering a false alarm. Clip MCW uses algorithm to enable three different detection modes (2m, 4m, 6m) in a single detector, each programmable for optimal performance with the unit’s specific application. Advanced motion analysis enables Clip MCW to distinguish human motion from other disturbances for the most accurate detection and the fewest false alarms. 3-volt long-life high power standard lithium battery. Attractive, sleek design suitable for any home or office. Includes additional internal input for connecting any hardwired device such as an occupancy sensor. Available only in 433.9 MHz. Note: Installation Charges apply. This is not a standalone burglar Alarm. It requires one of the following panels to work together:

We are a well-known Manufacturer, Exporter and Supplier of Vehicle Detection System in India.  M-GAGE­ Vehicle Detection System reliably detects the presence of large metal objects—such as a car, truck or railcar—even when the vehicle is not in motion. We have a quick transit system, which helps in time-bound delivery of our Vehicle Detection System.

A smoke detector is a device that senses smoke, typically as an indicator of fire. Commercial security devices issue a signal to a fire alarm control panel as part of a fire alarm system, while household smoke detectors, also known as smoke alarms, generally issue a local audible or visual alarm from the detector itself. Smoke can be detected either optically (photoelectric) or by physical process (ionization), detectors may use either, or both, methods. Sensitive alarms can be used to detect, and thus deter, smoking in areas where it is banned. Smoke detectors in large commercial, industrial, and residential buildings are usually powered by a central fire alarm system, which is powered by the building power with a battery backup. Domestic smoke detectors range from individual battery-powered units, to several interlinked mains-powered units with battery backup; with these interlinked units, if any unit detects smoke, all trigger even if household power has gone out.

• Capacity: Up to 500 Sense

The FG-NET digital unit is designed to be used for water leak detection, bases leak detection, acid leak detection and fuel leak detection. It is ideal for mission critical areas such as data centers, trading floors, semi-conductor plants. FG-NET unit can display a precise location (to the nearest metre) on a dynamic map. It detects simultaneous leaks hence avoid “a leak hide another” risk. Furthermore, the FG-NET digital unit can transmit the leak information to other LAN-connected equipments (such as BMS) via TCPIP and JBUSMODBUS communication protocols.

• Material: ABS
• Usage/Application: Smoke Detector
• Type: Smoke Detector , Heat Detector ,etc
• Power Source: Electric
• Voltage: 230 V
• Frequency: 50 Hz

ood contamination usually comes from one of four sources: raw materials, personal effects, maintenance or in-plant processing. By catching any physical contaminants before products leave the factory and end up on supermarket shelves, product inspection systems can help to protect the welfare of consumers, uphold brand reputation, reduce the risk of costly product recalls and help manufacturers with regulatory compliance. The need for metal detection systems in the food industry is recognized by most manufacturers and processors as an essential area for focus in any efficient quality regime. In an increasingly competitive market place, driven by ever-changing customer needs, tightening of industry standards and the growth of regulatory and legislative bodies, the importance of effective metal detection has been escalated in recent years.

Pole detectors are used only to check the polarity of the magnet. It is used where magnet strength is not required to be measured. FI make pole detectors are rugged and handheld to make them useful in the field. Working The tip of the unit detects the field polarity.The magnet surface is placed parallel to the unit tip.Two 1.5V AA battery operated. Power ON Switch activates the sensors and gives visual indicationin form of two LEDs placed on the arm of the unit.   Industries : Compressors, CT Manufactures, Educational Institutes, Forging Industry, Geology Study, Magnet Manufacturers, Metal Wire Industry, Motor Industry, Oil Industry, Relay Manufacturers, Research and Development, Special Material Development, Transformer Industry   Industries : Compressors, CT Manufactures, Educational Institutes, Forging Industry, Geology Study, Magnet Manufacturers, Metal Wire Industry, Motor Industry, Oil Industry, Relay Manufacturers, Research and Development, Special Material Development, Transformer Industry

• Warranty: 2 years on the instrument , 1 year on the sensor
• Battery Life: 6 h
• Operating Temperature: -20 to +50 C
• Length of gooseneck: 370 mm
• Oper humidity: 20 to 80 %RH
• Storage temperature: -25 to +70 C
• Power supply: 1 battery block
• Dimensions: 190 x 57 x 42 mm
• Weight: 348 g
• Minimum Order Quantity: 1 Unit

Presence detector, alarm sensor, Slot Sensor, Laser Displacement Sensor

We are offering wireless camera can be detected. Wireless transmission detection range 2 to 5 mts depending on signal strength. Ideal for ladies on tour / using public facilities. Good tool for engineers working on wireless.

Metal Detectors, security system product, Clothes, Namkeens, Ip Camera

pregnancy detector, printed identification tags, veterinary equipments

Access Control System

Presence Detectors, Load Managers & Energy Meters, Pull Cord Switches

temperature detector, thermal switch, Automatic Thermal Protector

Smoke Detectors, Standalone Fingerprint Attendance Device