Diamond Dresser Manufacturer Pimpri Chinchwad, Pune, Maharashtra

We are leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish. Diamonds are sensitive to shock and impact. The dresser must be clamped rigidly in place to avoid vibration once dressing begins. Depth of cut per stroke of the dresser must be 0.01-0.03 mm max. An ample supply of coolant should be applied directly to the diamond point before dressing begins, as the sudden application of coolant to the diamond once it has heated up can cause it to shatter. The diamond holder should not be set directly on the Center of the grinding wheel, but at an angle of 5-15° to the direction of rotation of the wheel. Turn the tool frequently 20 to 40 degrees to maintain a sharp point. This Diamond tools must be used in rotation system to increase efficiency. We also deal with multipoint diamond dresser and various other diamond tools to cater our service in industry. Cluster Type Diamond Dressers consist of a number of small natural diamonds of good crystal character, set in a geometric patterns in single layer and sintered in to a special wear resistant bond. This tool replaces single point tool for heavy dressing requirements for coarse grinding wheels. Cluster type diamond dressers gives rapid-dressing without scoring and produce a consistent even surface on the grinding wheel.

We are leading Phono Point Diamond Tools manufacturer in Pune, India. These are used for precision dressing of the most intricate forms and radii. It contains a fine, natural elongated diamond highly polished to an exact 60, 75 or 90 degree- included angle with radius on tip. The greater the angle the greater the tool life. This tool can form steps, sharp edges or more complex  shapes. Understanding that every operation needs different dimension and size, we manufacture these products in a wide variety of dimensions and sizes. We are also leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish.

We are leading Multi Point Diamond Tools manufacturer in Pune, India. Cluster Type Diamond Dressers consist of a number of small natural diamonds of good crystal character, set in a geometric patterns in single layer and sintered in to a special wear resistant bond. This tool replaces single point tool for heavy dressing requirements for coarse grinding wheels. Cluster type diamond dressers gives rapid-dressing without scoring and produce a consistent even surface on the grinding wheel. The dressing face of cluster type diamond dresser should be set at an angle of 90° to the grinding wheel so that all the diamond points are in contact at the same time. Depth of cut per stroke of the dresser should not exceed 0.01-0.05 mm max. Finer in feeds & smaller cuts will produce higher surface finishes. An adequate supply of coolant should be used both before and during the dressing operation, in order to prolong tool life. We also deal with single point diamond tools. Multi Point Diamond Dressers are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish. Diamonds are sensitive to shock and impact. The dresser must be clamped rigidly in place to avoid vibration once dressing begins.

, India. This tools are manufactured only from the Special grade natural diamonds mounted in a standard shank with included angle. This Dressers are manufactured in Flat or Radius Forms. We manufacture this tools with an radius & flat from 0.001″ to 0.010″ with included angle 30 to 60°. This tool undergo stringent quality control during manufacturing. Matrix Chisel Diamond tools are used for profiling and re-profiling of wheels with high accuracy on matrix thread grinding, Nowell, and Reishauer machine.

India. Diamond Grit Dressers have been developed from multi-point dressers. In contrast they are manufactured from crushed diamond grit rather than small natural diamonds. Our Dressers are manufactured with external bond system only, Diamond grit particles are uniformly distributed in a tungsten carbide matrix & molded in a specific bond size & then properly brazed on a required shank. This system contributes to a higher surface finish on grinding wheel & finished products. These Dressers are resistant to shock & impact which prevents shattering. A vibration free mounting, depth of cut not exceeding 0.01-0.04mm & plentiful supply of coolant should be provided both before and during dressing to prolong dresser life. The standard Diamond Bond are DG-6, DG-8, DG-10, DG-12, DG-15. These types of Dressers are used on center less, surface and cylindrical grinding machines.

Material : Stainless Steel

Color : Silver

Length : 50-100mm

Feature : Strong Structure, Rust Proof, Heat Resistance, Finished, Fine, Eco Firendly, Dustfree, Durable

We are leading Dust Type Diamond Tools manufacturer in Pune, India. This used for dressing the Diameter and Side faces of medium to coarse grained grinding wheels for finished Grinding. They allow relatively large amounts of in-feed while dressing. These dressing tools is best suitable for Profile grinding machines, screw thread, Thread Gauges, and gear threading machines and also for tool and plain grinders. These Dressers are resistance to shock & Impact which prevents shattering. We manufacture these Dressers according to finishing requirements with Diamond grades 1F, 2F, 3F, 5F, 7F. We are also leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish. We also deal with multipoint diamond dresser and various other diamond tools to cater our service in industry. Cluster Type Diamond Dressers consist of a number of small natural diamonds of good crystal character, set in a geometric patterns in single layer and sintered in to a special wear resistant bond. This tool replaces single point tool for heavy dressing requirements for coarse grinding wheels. Cluster type diamond dressers gives rapid-dressing without scoring and produce a consistent even surface on the grinding wheel.

We are leading Diamond Mounted Files manufacturer in Pune, India. Specially selected grades of natural diamond are used for our Mounted Points. This ensures smooth free cutting action with minimal heat buildup & long service life. Diamond Mounted Points are electroplated grinding pins manufactured in a state-of-the-art plant, incorporating automatic process control & unique plating technology. Mounted Points are available in a range of 1mm to 20mm diameter. We are also leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish

We are leading Diamond Intenders manufacturer in Pune, India. This are manufactured according to Rockwell & Vickers system. It is used to determine accurate hardness of Hardened Components. These Diamond Indenters are manufactured from an Octahedron exceptionally fine diamonds. The assorted diamonds are super lapped with exact angle with radius on tip. This ensures that there are rarely any errors, when it comes to results.Rockwell Indenter– The super lapped diamonds with an included 120° angle and tip radius 0.2mm with close tolerance gives Higher Standards & longer life.Vickers Indenter– The highly polished super lapped diamond with a square base pyramid with an angle of 136° that forms a square indent. We are also leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish.

We are leading Diamond Gauging Contact Point manufacturer in Pune, India. They are manufactured from GEM quality Diamonds completely lapped to a smooth curve with an included angle and radius on tip to minimize friction, ensuring consistency, repeatability, longer life and overall economy. These are in different types in dimensions and shape. It depends upon the systems attached and component to be measured, standard sizes are M4x0.5P, M5x0.5P, M6x0.5P Diamond Gauging Points are used in Automobile Industries for crankshafts, camshafts, gearshafts, pins etc for O.D. Measurements. We are also leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish. We also deal with multipoint diamond dresser and various other diamond tools to cater our service in industry. Cluster Type Diamond Dressers consist of a number of small natural diamonds of good crystal character, set in a geometric patterns in single layer and sintered in to a special wear resistant bond. This tool replaces single point tool for heavy dressing requirements for coarse grinding wheels. Cluster type diamond dressers gives rapid-dressing without scoring and produce a consistent even surface on the grinding wheel.

Diamond Files manufacturer in Pune, India. These files are prepared using 100% virgin diamond grains electro plated on top of precision high strength steel blanks. Each file exposes sharp diamond grains that are used for fast stock removal and long wear resistance. Our range of Diamond Plated Files is known for its sharpness, high tensile strength and abrasiveness. These files are Manufactured using high quality diamond powder along with full mechanical supports, especially Used for virtually any precision filing job. Available as individual f

We are leading Diaform Chisel Type Diamond Tools manufacturer in Pune, India. This tools are manufactured only from the highest grade of natural diamonds mounted in specific shank dimensions with standard included angles and nose radius. This tool undergo stringent quality control during manufacturing. Diaform Chisel Diamond tools forms accurate Profile on the Grinding wheel. These Diamonds are sensitive to shock & Impact, extended depth of cut or vibration may fracture or break the Diamond. Mounting the Tool vibration free, with feed rate about 0.01 0.02mm, with ample amount of coolant derives best tool life & performance.Standard Diaform Chisel Dressers –1) Diaform Chisel Diamond Dresser 0.125 R, 40/60 degree.2) Diaform Chisel Diamond Dresser 0. 25 R, 40/60 degree.3) Diaform Chisel Diamond Dresser 0. 50 R, 40/60 degree. We also deal with multipoint diamond dresser and various other diamond tools to cater our service in industry. Cluster Type Diamond Dressers consist of a number of small natural diamonds of good crystal character, set in a geometric patterns in single layer and sintered in to a special wear resistant bond. This tool replaces single point tool for heavy dressing requirements for coarse grinding wheels. Cluster type diamond dressers gives rapid-dressing without scoring and produce a consistent even surface on the grinding wheel.

We are leading Crown Type Diamond Tools manufacturer in Pune, India. These dressers are specially recommended for cylindrical grinders and all type of large wheels where fine dressing is considered important. Comprising of several natural diamonds these multi point diamond dressers can be utilized to the maximum possible extent. In this type the diamonds are mounted on a circular crown in such a manner that an angle of 90 degrees is formed between the circular crown and the operating plane. Once the diamonds get used at their current positions the crown can be readjusted on the shank and hence diamonds can be completely used up. Fine finish is obtained on the wheel due to the crystal shape of the Diamonds. It can be used for side dressing of grinding wheels.Available with us are the following two types of indexable crown type diamond dressers:1. EM-24 with 24 Diamonds for wheel size up to 600 mm diameter wheel.2. EM-36 with 36 Diamonds for wheel size above 600 mm diameter wheel. We are also leading Single Point Diamond Dressers manufacturer in Pune, India. They are made of selected shaped diamonds, mounted (brazed) in a shank. Only one cutting edge is presented to the grinding wheel. We manufacture this Dressing tools with synthetic “A” Grade & Natural Diamond points only. Carat size of this Diamonds depends on the diameter & width of the grinding wheel. The proper selection of size and quality appropriate for a given application requires qualified and experienced judgment. The lower the feed rate, the finer the surface finish.

India. This tools are manufactured only from the highest grade of natural diamonds mounted in specific shank dimensions with different included angles from 30 to 70 and nose radius 0.1r-0.75r. This tool undergo stringent quality control during manufacturing. Wherever blade type tools cannot meet the requirements of Profiling and copy dressing of grinding wheels, due to the specific grinding wheel geometry, Chisel Diamond tools are the solution. This tool forms accurate Profile on the Grinding wheel. These Diamonds are sensitive to shock & Impact, extended depth of cut or vibration may fracture or break the Diamond. Mounting the Tool vibration free, with feed rate about 0.01 0.02mm, with ample amount of coolant derives best tool life & performance. These tools are mainly used on Studer M/C, Toyoda M/c, Mitsubishi M/C, Okuma M/C, Fortuna M/c etc.

We are leading Blade Type MCD manufacturer in Pune, India. MCD (Mono-Crystalline Diamond) are completely man made Diamonds. These Diamonds are processed from natural Diamond stone and laser cut to a required square shape with standard size & length. Number of Diamonds to be mounted on blade depends on the diameter & Width of Grinding wheel. Each Diamond length up to 5mm replaces the needle Diamond, once the Diamond starts dressing, it continuously generates the same results till the end. There is no diamond layer exposure & issue of point blunt concept with this Diamond. The Dressers with this Diamond results superior and quality dressing processes. These can be used for OD (Plain) dressing, Angular dressing and Wheel Corner Profile dressing applications. Our professionals ensure that these products are made in compliance with the preset industrial norms & standards. These MCD Diamonds are arranged in a very systematic pattern in parallel or at 45° into the blade dressing blank. “Parallel arrangement” is more wear resistant and more effective when dealing with “hard” wheel bonds. 

-manufacturer-in-pune/">multipoint dresser as it can be used in straight as well as profile dressing. For this tool high quality Needle shaped diamonds are carefully selected and set manually in an appropriate pattern in several layer’s and molded as a small plate in tungsten carbide matrix. This dressers are designed to utilize their full life span with minimum deterioration of form and tolerances. While in use as soon as one layer wear outs, second layer is exposed immediately for constant dressings. These dressers are designed to use in straight, step, radius, profile dressing and they have been created to tackle problems that couldn’t be corrected with single or multi point diamond dressers. Vibration free mounting with in feed rate 0.01-0.03mm along with ample amount of coolant before & during Dressing results to prolong tool life.

Material : Stainless Steel

Color : Silver

Length : 50-100mm

Feature : Strong Structure