Digital Analyzers Dealers in Pune

• Country of Origin: India
• Type: Power Analyzer
• Weight: 0-1Kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Brand Name: Treffer

We are offering power quality analyzer voltage and current thd, current tdd and k-factor, up to 50th order harmonic, true rms measurement with 128 samplescycle, en50160 compliance statistics, harmonic survey statistics, ieee519 & ieee 1159 measurement compliance, iec 61000 flicker, cbemaitic, iec 6100-4-7 harmonics, tou energy measurement, standard rs-485 communication port and an additional plug-in rs-232rs-422rs-485, ethernet, profibus, gprs module, true rms volts, amps, power, power factor, neutral current, frequency, two independent, simultaneous waveform recorders with upto 2000 post fault cycles 5060400 hz measurement capabilities, class 0.2s iec 62053-22 four-quadrant active and reactive energy meter, three-phase total and per phase energy measurements; active, reactive and apparent energy counters, real-time waveform monitoring capability, add on tou, rtc, dido modules.

• Iinterfaces: 2.0 USB
• Sampling rate: up to 400 kHz
• Use: Industrial

Quantum magnetic resonance analyzer It contains quantum analyzer and Low frequency physiotherapy functions, and Low frequency physiotherapy functions contains the slipper and paster functions( Also known as TENS Therapy ). So it contains Quantum analyzer, Slipper functions, Paster functions.

• Type: Energy Management System

40th harmonic modularly expandable residual current measurement mid certification color graphical display & 6 key operation 600 v cat iii ethernet interface class 0.2s

• Features: High power LED Volume or light sheet Synchronization PIVTecILA software Easy setup Background illumination ILA.PIV.Nano Camera Also suited for MicroPIV Etc
• Specifications: Pulses 0...200A Power 0...47mW/ cm2 Colours green, blue, red, white, UV Length 120mm (without op

Particle Image Velocimetry is a non-intrusive laser optical technique used for determination of the velocity distribution in fluids. The complexity of a system can strongly vary depending on the type of application, however the basic principle of PIV stays the same. For the purpose of PIV, the fluid is seeded with light scattering particles, which are believed to follow the flow dynamics. The flow is illuminated by a concentrated light source, normally a laser, where as a special camera is acquiring the reflected light from tiny particles in the flow. The camera takes two consecutive images which are synchronized with the two light pulses. The light pulse is very short such that single particles can be identified in the images without blurring effects. The cross correlation software then calculates the displacement of the particles between the first and second image. Since the time between the two light pulses is known, the velocity field can be calculated.

• Application: Industrial Use
• Brand Name: MicroSet
• Weight: 5 Kg
• Country of Origin: Made in India
• Model Name/Number: MS TU 711
• Operating Temperature: 0 to 60 Deg C

Model 2020 Thermal Conductivity Analyzer is a versatile, explosion-proof, microprocessor-based instrument for measuring binary mixtures of gases. Model 2020 responds to the differences in thermal conductivity between various gases by continuously comparing the sample gas with a reference gas of known thermal conductivity.   Features • Customer selectable gas constituents; 11 gases, 110 combinations• 6 gas concentration alarm set points• Automatic linearization• Auto Ranging automatically selects the proper preset range for a given measurement. Manual override allows the user to lock onto a specific range of interest.• A 2-line alphanumeric display screen (VFD), driven by microprocessor electronics that continuously prompt and inform the operator• Proven sensor cell design• Auto and remote zero cal capabilities• ndependent zero and span correction• Two programmable alarm relays and a system failure alarm• Two way RS-232 serial digital port for use with a computer or other digitalcommunication device• Four analog outputs: two for measurement (0-1VDC and isolated 4-20mADC) and two for range identification• Extensive self-diagnostic testing at start-up and on demand with continuous power supply monitoring

PQA820 is a power quality analyzer performing an easy and wide analysis of the most significant parameters of the electrical system. Thanks to an innovative project, the instrument can be interfaced to smart phones, tablets and PDAs ( iOS and / or Android ) meeting the requests of the most demanding professionals. All the electrical parameters can be displayed in both numerical and graphical mode, by waveforms, histograms and phasors. The vector diagram shows the phase angle between any voltage and the related current, revealing the inductive or capacitive nature of the loads connected. The large built-in memory allows to log up to 383 parameters, granting a re-cording lasting more than one month with an integration period of 10 minutes. PQA820 records all parameters by default so avoiding any failure. The user will never miss recording the parameters he needs, since PQA820 records everything while selecting one of the three predefined settings ( single phase, 3-phase without neutral, 3-phase with neutral ). PQA820 is powered by an internal rechargeable Li-Ion battery with a built-in user-selectable L-N or L-L power supply. The Wi-Fi and the USB interfaces grant connection to smart phones, tablets, PDAs and PCs for instrument setting, recording start and stop, data downloading, and data analysis. Its IP65 waterproof hard carrying case allows PQA820 to work outdoors under critical environmental conditions. Function •  DC voltage•  TRMS voltage with 4 inputs for line(s) and neutral (if any)•  DC current•  TRMS current with 4 inputs for line(s) and neutral (if any)•  DC power•  Active, reactive and apparent power and energy•  Power factor and cos-phi•  Frequency•  Up to 383 parameters to be recorded at once•  Integration period selectable from 5 seconds to 60 minutes•  Voltage and current harmonic analysis up to the 49th order•  Voltage anomalies (sags, swells) with 10ms resolution•  Numerical data analysis (DMM function)•  Graphical display of voltage and current (scope)•  Harmonic histogram•  Vectorial diagram of voltages and currents•  Voltage unbalance•  Predefined recording settings•  Built-in memory for data logging•  Wi-Fi and USB interfaces•  Android / iOS / Windows software•  Rechargeable Li-Ion battery with built-in power supplyGeneral Specification• Internal supply: Li-ION rechargeable with built-in power supply, duration 1h• Mains supply: 100 ÷ 415V, 50/60Hz• Internal memory: 8Mbytes (approx. 30 days @ IP = 10min, max parameters)• PC interface: USB 2.0• Remote device interface: WiFi communication• Remote device interface: Tablet/Smartphone (iOS, Android)• Safety: IEC/EN61010-1• Insulation: double insulation• Measurement category: CAT III 300VAC (to ground) Max 460V between inputs• Dimensions (LxWxH): 245x210x110mm• Weight (battery included): Approx. 0.7kg ACCESSORIES Code Standard Flexible transducer for 0÷100A, 0÷1000A AC current 174mm diameter, 4 pcs HTFLEX33L Set of 4 cables 2m KITMPPACW Set of 4 alligator clips KITMPPACC Magnetic adapter for connection to screw heads, 4 pcs 606-IECN Windows software + USB cable TOPVIEW2007 Carrying bag for accessories BORSA2051 ISO9000 calibration certificate Quick reference guide User manual on CD-ROM Optional Transducer for 0÷200A, 0÷2000A AC current, Ø70mm HP30C2 (*) Transducer for 0÷1A, 0÷100A, 0÷1000A AC current, 54mm diameter HT96U (*) Transducer 3x1-5A/1V for connection to CTs HT903 (*) Transducer for 0÷1000A, DC current, Ø50mm HT98U (*) Transducer for 0÷1000A, DC current, Ø83mm HP30D1

• Dimensions: 2.8W x 5.1H x 6.7D Inch
• Accuracy: +/- 2 % of measurement range
• Voltage: 115, 230 V AC
• Frequency: 50-60 Hz
• Temperature: 0-55 Degree C
• Item Code: Model-960
• Linearity: +/- 1 % of measurement range

• Usage/Application: Laboratory Use
• Brand: Shimadzu
• Model Name/Number: EZtest

• Brand Name: Ohaus
• Application: Percent Moisture Determination, Percent Solid Determination, Weighing
• Features: Compact design suits any workspace, User-friendly touch-button design for easy operation.
• Model Name/Number: MB23
• Power Supply: 240 V AC, 50/60 Hz
• Readability: 0.005g
• Maximum Capacity: 110g
• Pan Size: 90mm (Diameter)
• Size/Dimension: 17 x 13 x 28cm (W x H x D)
• Weight: 2.3kg
• Communication: RS232 (included)
• Display: Backlit liquid crystal display (LCD)
• Operation: Power cord (included)
• Construction: Infrared heat source, ABS housing, metal pan support, metal pan handler, in-use cover

. PORTABLE GAS ANAL YSERS Thanks to a special internal battery they represent the portable version of Totalgas line with whom they share the accuracy and reliability. Ideal for on road testing TECHNICAL FEATURES

Noise & Frequency Analysis There are many cases, where high vibration amplitudes are not caused, only by rotor unbalance. In such cases vibration Analyzer (with tracking filter section) covering broad frequency range, can offer specific 'SINGNATURE' of rotating body to identify the Sources of vibrations. This helps to conclude the Source of Vibration like :

The UMG 511 power quality analyser is particularly suitable for monitoring power quality according to standards such as the EN 50160. All power quality parameters are collected and analysed e.g. flicker, short term interruptions with fault recorder function, transients, harmonics up to the 63rd and inrush currents etc. Extensive communication possibilities e.g. RS 485 Modbus, Profibus, Ethernet (TCP/IP), BACnet, http, FTP, SMTP, SNTP, DNS ... allow cost effective and rapid integration in existing communication networks. Worldwide access to the embedded web server can be gained through a web browser. The GridVis software included in the content of delivery allows extensive analysis just by the click of a button.

• Country of Origin: Made in India
• Color: Blue
• Item Code: TRB-12
• Brand: EEE
• Usage/Application: Testing
• I Deal In: New Only

• Type: Analytical Instruments
• Brand Name: ELECTRONET
• Color: Blue
• Display Type: LCD Graphical (128x64)
• Power Supply: 1) 24 V DC 2) 85 to 265 V AC,50Hz
• Accuracy: 1) pH, ± 0.02pH of F. S. 2) ORP, ± 2mV of F. S. 3) DO, +/-0.25% of FS 4) Conductivity, ± 0.25% of F.
• Model Number: UAC-100
• Place of Origin: INDIA

UAC-100 is dual input analyzer with single or dual sensor input. This analyzer supports wide range of measurement choices in industrial applications. It can accept pH / Conductivity / ORP / DO sensor input in any combination.

The optical windows are made of hard-toscratch sapphire glass. This facilitates scrubbing of the window surface to keep the turbidity sensor clean.

The Portable Vibration Analyzer offered by us is used to vibration measurements in industrial settings. Our Portable Vibration Data Analyzer is backed with all kinds of features for the optimum analysis of rotating machines. Apart from this, we are considered as one of the major Handheld Vibration Analyzer Manufacturers in Pune, Maharashtra. Functions Cross SpectrumTransfer FunctionTransmissibilityCoherenceOrbit PlotsBalancer upto 4 planesOrder AnalysisCurrent Analysis Specifications Back Lit screens, 16 Grey scales , 320X240 pixels, 80 X 60mm screenKeyboard with 21 multifunction touch-sensitive keysCommunication : RS232 or USBPretest and Self-calibration functionsLi-ion Battery operating time more than 8 hoursDimension 220 X 130 X 60mm, Weight : 0.9KgOperating Temperature : -10 to +50oC2 Acquisition channels + 1 trigger input, 40 HzCompatible with triaxial accelerometerBuilt in Laser pyrometer: Temp range from 0 to 200oCBuilt in Laer tachometer: range from 0 to 60000 RPM

• Iinterfaces: 2.0 USB
• Sampling rate: up to 400 kHz
• Use: Industrial

• Brand: Lutron
• Model Name/Number: UV 340A
• Display: 13 mm ( 0.5" ) LCD. 3 1/2 digits. Maximum indication 1999.
• Measurement ranges & resolution: 1999 uW/cm2 x 1 uW/cm2
• UV sensor spectrum: Band pass 290 nm.
• Sensor structure: The exclusive UV photo diode & UV color correction filter
• Sample Time: Approx. 0.4 sec.
• Over range indication: Indication of "1"
• Weight: 220 gm
• Operating temperature: 50 Degree C
• Operating humidity: Max. 30% RH
• Power Supply: DC 9V006P, MN1604 (FF3) or equivalent
• Power consumption: Approx. DC 2.7 mA
• Main instrument: 131 x 70 x 25 mm
• Sensor probe head: 63 x 60 x 27 mm
• Sensor probe handle: 93 x 20 mm dia.

• Spatial Resolution: 640 x 480 (60 Hz); 768 x 576 (50 Hz),

Quantimet is Image analyzer best suited for variety of practical material testing applications. Sophisticated algorithms and consideration given to practical laboratory working conditions of sample preparation proves it to be most user friendly. The software is thoroughly tested by subjecting it to variety of specimens from different industries prepared in our own testing laboratory. Quantimet is perfect integration our expertise in metallurgy (metallography ) and software applications. Each module is further upgraded with the collaboration of eminent from respective field. One can find many special features those are immensely useful in day-to-day working for fast and reliable analysis. Various camera options are available as per the application needs, chip size ( 14", 13", 12", 23" ), single chip three chip, with variety of frame grabbing speeds and resolution, from different makes like Wattec, JVC, Sony, Pulnix

Image analyzer We have developed this solution for the ophthalmic industry, specifically to help an ophthalmologist view the entire retina to assess the onset or progression of retinal diseases. The human retina is imaged with a fundus camera which captures successive but overlapping fields of view. The Ophthalmologist however requires to view the entire retina. We have developed efficient and innovative algorithms to analyse, transform and merge multiple images to create a combined retinal field of view. Multiple images captured over time can also be geometrically matched and compared. This is essential to assess the progression of diseases. The application currently provides the following features:system

• Benefits: Real-time analysis,High accuracy, measuring up to microns etc.

Particle size can influence the processability of powders, both API and excipient, and affect the final formulation. In order to maintain uniformity and obtain maximum efficacy from product, particle size distributions need to be studied, with quality control at key stages in production. The PSA is a powerful tool for research and development and quality control, determining size promptly, accurately and conveniently.

Test preparation & engine handling has been one of the key factors during engine testing. To utilize the test bed to its optimum capacity it is necessary to prepare the engine for testing outside the test bed & enable quick coupling of the engine to the dynamometer. One of the ways to achieve this is to use the trolley docking system. Triotech Engineering undertake to design & develop customized trolley docking systems

We also manufacture Power Quality Analyzer making use of advanced technologies for fabricating these, so as to maintain their optimum quality and durability.Features• True RMS single - two- and three-phase measurements at 256 samples/cycle, plus DC• Real-time color waveforms and Easy-to-use on-screen setup• True RMS voltage and current measurements• Measures DC volts, amps and power• Display and capture voltage, current and harmonics to the 50th order, including direction in real time• Phasor Diagram Display• VA, VAR and W per phase and total• KVAh, VARh and kWh• Neutral current display for three-phaseTransformer K-factor display

The worldwide Dissolved Gas Analyzers DGA Market Research Report covers the in-depth research on the present situation of Dissolved Gas Analyzers DGA industry. It also covers the market concentration rate on the Dissolved Gas Analyzers DGA market scenario. Geographically, this report is segmented into several key Regions, with production, Dissolved Gas Analyzers DGA consumption, Dissolved Gas Analyzers DGA market revenue (million USD), market share and growth rate of Dissolved Gas Analyzers DGA in these regions, from 2012. .

• Accuracy: ± 0.015 ccm/100g
• Resolution: 0.01 ccm/100g
• Voltage: RS232 100 - 240 VAC / 50-60Hz
• Dimensions: 445 x 350 x 310 mm ca.
• Weight: 18.7 kg
• Measuring range: 0 - 9.99 ccm/100g
• Measuring time: 7 - 10 minutes
• Interfaces: USB; Ethernet;

With the "CHAPEL® portable" the hydrogen content in liquid aluminium can be measured. The "CHAPEL® portable" is the only device worldwide with which, through a method of direct ascertainment of the hydrogen content, can be continuallycarried out. The device distinguishes itself due to its compactness and easy operation. In the centre there are two separate user interfaces, through which the device can be easily operated.   The "CHAPEL® portable" probe reacts in liquid metal like an artificial bubble. It excels due to its outstanding temperature shock resistance. In addition, it has a life expectancy of more than a year and has excellent resistority in aluminium melts. Numerous possibilities for data storage and transference to the PC are implemented (RS232, Ethernet connection, USB).

Sinda uses a conductor-capacitor network representation approach to thermal analysis that offers numerous benefits when solving thermal problems. Sinda goes beyond other solutions by also providing a powerful thermal programming language, enabling engineers to construct complex thermal scenarios that would otherwise be difficult or impossible with other analyzers