Digital Meters Dealers in Bhosari, Pune

• Weight: 0.82 kg
• Accuracy: +/- 0.5 percent
• Repeatability: +/- 0.15 percent
• Display Type: Digital
• Usage/Application: Industrial
• Flow Range: 1.9 to 57 lpm
• Maximum Pressure: 34kPa,0.3 bar
• Flow Range: 1.9 to 57 lpm
• Maximum working pressure: 10.3 MPa, 103
• Minimum working pressure: 34kPa, 0.3 bar
• Operating temperature range: -20°C to 50°C
• Storage temperature range: -25°C to 50°C
• Wetted parts: Stainless steel, PBT (polybutylene terephthalate) nickel, nitrile rubber
• Batteries: 2 AA alkaline
• Expected battery life: 6 to 12 months

• Brand Name: Multispan
• Power Source: 230VAC
• Country of Origin: Made in India
• Model Name/Number: AVF 19N
• Usage/Application: Industrial
• Dimension: 96 X 96
• Display: Digital
• Usage: Industrial
• Supply Type: Auxillary
• Number Of Wire: 3
• Condition: New

• Brand: Scope
• Item Code: SCOT-MUT4
• Accuracy: Value ± 0.05 % ± 1 Digit
• Dimension: 245 x 160 x 85 mm
• Instrument Weight: 2.5 kg
• Power Supply: 230 V AC
• Display: 4 line 20 character backlit LCD

• Display Type: Digital
• Packaging Type: Box
• Voltage: 220 V
• Power Source: Electric
• Body material: Plastic
• Frequency: 50 - 60 Hz

Combining the function of both, Hour meters and Counters, these highly reliable and compact devices manufactured by GIC measure time and keep count of a particular event or process with the highest level of accuracy. DIGITAL HOUR METER & COUNTER   Compact size with 7 digits,with 6.5mm height, backlit LCD Suitable for both Digital Hour Meter & Counter application Suitable for Panel Mount

• Brand Name: SCOPE
• Dimension: 245 x 160 x 85 mm
• Instrument Weight: 2.5 kg
• Power Supply: 230 V AC
• Memory: 50 results
• Display: 4 line 20 character backlit LCD

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. a pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rf field. this signal is amplified and conditioned by a transmitter or fed directly into a ratetotalizer, and represents the actual cubic feet per minute (acfm) flowing through the meter. the k-factor is stenciled on the meter body in pulses per actual cubic feet (pacf). because gases are compressible, most people desire to measure the equivalent amount of gas corrected for the line pressure and temperature to standard cubic feet per minute (scfm at 60ã�â°f, 14.69 psia). if the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift the k-factor from pacf to pscf and a simple totalizer (measurement systems india make ) may be used. when flow temperature and pressure are not constant, a flow computer. specifications linearity 1 ã�â±1.0%0.5% repeatability 1 ã�â±0.25% maximum over-range 125% of flow rate for intermittent periods frequency output 0 to 1,100 hz voltage output approximately 100 mv@ 100 hz to 1.5 v (rms)@ 1,000 hz. pressure drop 0.5 psi at 100% of flow range pressure rating we manufacture flowmeters for most pressures. installation vertical or horizontal (any direction). materials of construction body: 316 l stainless steel. flanges: 316 stainless steel rotor: 431 stainless steel. rotor shaftbearings: standard: tungsten carbide v-cup cartridge frame retainer: 302 stainless steel cartridge frame: 316 l stainless steel. temperature range:meter with bearing structure of: for other temperatures consult factory.

Primary Head for Water and Waste Water Measurements.It is a reliable expert for water and wastewater measurement, easy ,quick and low cost of installation. It has a hard rubber liner, rugged and proven design & absolutely maintenance free.

• Driven Type: Electric
• Application: Industrial

Backed by rich industry experience, we are presenting our clients a complete range of Digital Static Meter SCM-02. Our product range is designed for locating and measuring static charge potential on objects, people and equipments and is perfect for measuring electrostatic charges encountered in plastic, paper, packaging, textile, food, pharmaceutical, electronic items. 

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. a pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rf field. this signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowing through the meter. the k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). because gases are compressible, most people desire to measure the equivalent amount of gas corrected for the line pressure and temperature to standard cubic feet per minute (scfm at 60â°f, 14.69 psia). if the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift the k-factor from p/acf to p/scf and a simple totalizer (measurement systems india make ) may be used. when flow temperature and pressure are not constant, a flow computer. specifications linearity 1 â±1.0%/0.5% repeatability 1 â±0.25% maximum over-range 125% of flow rate for intermittent periods frequency output 0 to 1,100 hz voltage output approximately 100 mv@ 100 hz to 1.5 v (rms)@ 1,000 hz. pressure drop 0.5 psi at 100% of flow range pressure rating we manufacture flowmeters for most pressures. installation vertical or horizontal (any direction). materials of construction body: 316 l stainless steel. flanges: 316 stainless steel rotor: 431 stainless steel. rotor shaft/bearings: standard: tungsten carbide v-cup cartridge frame retainer: 302 stainless steel cartridge frame: 316 l stainless steel. temperature range:meter with bearing structure of: standard: tungsten carbide: -40â°f to 300â°f (-40â°c to 149â°c). for other temperatures consult factory.

The Fluke 179 True RMS Digital Multimeter is the industry standard for troubleshooting and repair of electrical and electronic systems. With Fluke 179 TRMS Digital Multimeters precision, reliability, and ease of use, the Fluke 179 True RMS Digital Multimeter is the preferred solution for professional technicians around the world. With all the features you need to troubleshoot and repair in electrical and electronic systems, the Fluke 179 also offers a digital display with analog bar graph and built-in temperature measurements. You can trust the Fluke 179 to get the job done in all of the messy, loud, high energy and high places you work. Backed by a lifetime warranty, the Fluke 179 is independently tested for safe use in CAT IV 600 V/CAT III 1000 V environments. Fluke builds the most trusted tools in the world, and that means more than just the Fluke 179. If you work with the HVAC equipment, need a small meter for small spaces, or work in the electrical installer’s and repairman’s world, check out the full family of Fluke digital multimeters.

• Application: Industrial Use
• Display Type: Digital
• Phase: 3 Phase
• Mounting Type: Panel Mounted
• Condition: New
• Brand: Multispan
• Usage: Industrial
• Model: AVH 14N
• Power Supply: Auxillary
• Measurement Lines: 6 digit

digital multi meters, Solvents, panel board, MCCB, Mcb, Buying Property

digital multi meters, Stainless Steel Bolts, Stainless Steel Nut

• Brand Name: Mass Flow
• Size: 10mm to 1000mm
• Place of Origin: Pune, Maharasthra
• Condition: Good
• Feature: High durability, robust structure and resistivity to adverse

We offer Digital Gas Flow Meter as Per Customers’ Requirements. Our Standard Sizes are Up to 10 Inches and Can Be manufactured as per the needs of the customers. We are recognized as one of the prominent Digital Gas Flow Meter Manufactures, Suppliers and Exporters. These Digital Gas Flow Meters are ideally designed to measure the rate of flow of fuel gases consumed for Commercial Industrial or Residential purposes. The use of optimum quality materials in the manufacturing of the Digital Gas Flow Meter ensures high durability, robust structure and resistivity to adverse conditions. Details - Steel Insertion Type : Inline Type Sizes Available 10mm 15mm 20mm 32mm 40mm 50mm 65mm 80mm 100mm 125mm 150mm 200mm 250mm 300mm 400mm 500mm 600mm 800mm 1000mm     Temperature Compensation     Pressure Compensation Optional     Humidity Compensation     Density Compensation     Material Used - Steel    Types - Mechanical gas flow meter series EQZ Mechanical gas flow meter series TRZ GWF Volume Corrector ELCOR 2 SS Turbine Flow Meter Vortex Mass Flow Meter Thermal Mass Flow Meter Turbine Type Mass Flow Meter with Pressure and Temperature compensation Diaphragm Gas Meters Ultrasonic Flow Meters Coriolis Mass Flow Meters

Digital Flow Meter, Air / Gas Flow Meter, Industrial Oxygen Flow Meter

RISH Master Digital Meters, C&S Multifunction Meter CSM-M3-S3

Digital Panel Meters, Current Transformers

SCOT Time Interval Meters, HISAC Contact Resistance Meter

Digital AC DC Volt Meter, Programmable Preset Timer

Coating Thickness Meter, Measurement Data Network System

SCOT M3K, Battery power pack, Surge Generator

Panel Meters, MCCB, servicing, Trading, Power Saver, Electronic

Digital Planimeter, Trimble Total Station Survey Instrument

Digital AC / DC Ammeter, flat panel monitors, Battery Testing Instrument