Dual Valve Dealers in Pune

Dual sensing solenoid valve for press machine clutch & brake.

• Size: 63 mm
• Material: Gunmetal / SS
• Inlet: 100 mm
• Quality: ISI Marked

Avail from our high quality range of Double Headed Hydrant Valve at affordable prices. Our Double Headed Hydrant Valve has 63mm double controlled hydrant valve with 100mm NB inlet. It is designed as per IS : 5290 type B. Double Headed Hydrant Valve offered by us is sturdy, reliable and provides minimum maintenance for a long period of time. Customers all over the world can avail them from us at market leading prices.

• Type: Double Flap Valve
• Material: Carbon Steeel, Metal, Stainless Steel
• Length: 100-200cm, 200-400cm, 1000
• Application: Industrial Use
• Color: Black, Blue
• Feature: Durable, Easy Maintenance., Rust Resistant And Unmatched Quality
• Pattern: Plain
• Condition: New
• Structure: Vertical
• Warranty: 1yr
• Automation Grade: Automatic, Manual
• Country of Origin: India

• Type: Dump Valve

DeGATECH dump valve (also known as a double dump valve, flat gate valve, or double flap gate valve) controls the rate of material flow through a system more efficiently than a rotary valve. Because there are two gates, one of which is always closed, the pressure drop from inlet to outlet is always maintained. A dump valve endures much less wear and tear than a regular rotary valve, making it last longer and keeping maintenance costs down. Our dump valves are available with pneumatic, gravity and electric operators. These valves are widely used in the following industries: cement, fly ash, iron ore, paper, and bulk powders.

The Double Solenoid Valves by SAMSON are solenoid operated which direct and regulate the pressure. The sturdy body gives it high resistance to heat, corrosion and rusting.

• Valve Size: 4 Inch 
• Brand Name: Ace Hydraulic
• Material: Mild Steel
• Max flow rate (L/min): 40 min
• Operating Pressure (MPa): 31.5 MPa
• Usage/Application: Industrial

DEMECH has supplied Flap valves having inlet size from 200 to 500 mm square. Whereas Cone valves upto of 400 mm diameter have been supplied.The valves need power to open but are closed naturally by counter-weights. The valves are fabricated from mild steel plates with access cover to inspect and attend to the Cone or Flap. Due to low and controlled speed, wear due to abrasive material is minimal. The entry and exit of chamber can be provided with liners for longer life. Cone and seat are casted in suitable wear resistant material to take care of abrasion. The flaps are fabricated either with replaceable liners of hard material or they are manufactured from hard plates like Sailhard or Hardox.The valves are either driven by electric motors or pneumatic hydraulic cylinders. To achieve the alternate and sequential operation, the motor driven valves have specially custom designed cam arrangement and the cylinder operated valves have a sequential timer based controller.

• Material: Aluminium
• Brand: SAVIU
• Pressure: 10 Bar
• Media: Air
• Power: Pneumatic
• Item Code: DCV
• Power Source: Manual

Dual Tunnel Type Diverters have been specially designed to route powders and pellets with minimum degradation in pneumatic conveying systems.   FEATURES The Indpro diverter is applied in the chemical, pharmaceutical, plastic, food and other related industries The Indpro diverter consists of an Aluminum housing and end covers in which a plug with two pipes is installed All product contact surfaces are made from SS 304 Three approved silicone seals guarantee the sealing between housing and plug The body is pressure tight, so ensuring no leakage to atmosphere The standard diverter can be used in systems with positive pressures up to 3 bar g (static seals) The sizes 50-150 are optionally available for pressures up to 6 bar g (inflatable seals) The Indpro dual tunnel diverter valve is supplied with a complete electro pneumatic control system, including solenoids and inductive position sensors The standard diverter can be used for product temperatures ranging from –25 °C up to +80 °Cat ambient temperatures of –10 °C up to +40 °C. Versions for higher temperatures are available on request

Double Cone Flap valves are used for controlled feeding as well as achieving air lock sealing. These valves consist of two independent Cone Flap valves mounted one upon other with their opening and closing alternated and synchronized to ensure that only one valve opens at a time. DEMECH manufacture these valves to suit the opening sizes and required through-put rate. The through-put of these valves depend on the holding volume of the upper valve chamber and the rate of operations. These are very slow operating valves as the operation cycle rate does not usually exceed beyond 6 cycles per minutes. Thus these valves have a batch feeding pattern rather than continuous feeding. Selection of Cone or Flap depends on the characteristics of material to be handled and system requirement like pressure sealing. Cone valve has a better sealing than the Flap valve. However, in smaller size valves the Cone can act as an obstruction in the flow resulting in clogging of the small opening. The Cone valves usually have round opening whereas the Flap valves can have square.

Whizz Engineering Services Pvt. Ltd. is one of the leading manufacturer and supplier of highly double flap valve in Pune. Double flap valves are a type of airlock valve commonly used in industrial applications as a component in bulk material handling applications. Double flap valves are primarily used to discharge chunky or fibrous, bulk materials from hoppers, bins, and cyclones operating under positive or negative pressure. Clients can avail this double flap valve at very reasonable rates.

Double flap valve is continuous material discharge equipment. Double Flap Valve has a two door flap plate which open and close alternatively.

OUBLE FLAP VALVE Double dump valves have two trap-door flap plates which open and close on an alternating cycle. The top gate opens to allow collected material to drop through onto the bottom gate. The top gate then re-closes to prevent air leakage above the valve. The bottom gate then opens to allow material to pass completely through the valve. The bottom gate then re-closes to prevent air leakage below the valve. This cycle is continuously repeated in order to maintain a steady discharge of material from the valve, while maintaining a positive seal on the system.

We offer dual tunnel diverter valve. Electromech technical services manufacturing a dual tunnel diverter valve is specially designed for diverting the products in dense dilute phase conveying the systems to many destinations.

The dual tunnel Diverter Valve is designed to divert product in dilute dense phase conveying systems to number of destinations.Shortest possible switchover time as designed with two separate channels. - Powerful pneumatic Actuator centre connected to plug through linkages. - Designed for Maximum system pressure of 6 bar g. - Designed for Maximum solids temperature of 120 deg.C. - Available sizes 50 NB to 200 NB. - Either static or dynamic seal. - Housing in die cast aluminium construction with inserted Stainless steel pipe if required.

We are one of the most sought after Manufacturers, Exporters as well as Suppliers of 5/2 Way Pilot Operated Double Coils in national territory. Made up of the finest grade materials, our Solenoid Valves can be used up-to 80°C. Further, we also provide customized solutions for our Valves. With us, buyers are free to place orders, we ensure timely deliveries.   Features Type : 5/2 Way Pilot Operated Double Coil, Impulse Operated Poppet type Design Port Connection : 1/4" BSR Mounting : Suitable for sub base mounting Media : Air Operating Temperature : 80oC max. Operating Pressure : 2-10 bar. Orifice : 6mm Flow Factor : 12 KV. Coil : 230 VAC/ClassV Insulation/ Size 1/ IP65 Protection. Coil Power Consumption : Inrush VA-18/ Hold on VA-12/ Wattage- 6W. Valve Body Material : Aluminium alloy hard anodised. Manual Override : Push Button type. Application : Solenoid Valve for Double Acting Cylinder, where Port is required to be latchico when power fails.

• Type: Hydrant System
• Inlet Size: 63 mm
• Outlet Size: 2 No of 63 mm
• Usage: Industrial, Commercial 

We offer RUTCON Series 5453 Double Offset Butterfly Valve. The high-performance Double Offset Butterfly Valves are available in most of the end connections as wafer, lugged, flanged, butt weld ends, etc. Bubble Tight Shut Off, Greater Seat Valves are specially designed for applications in Chemical, Petroleum, Hydrocarbons Processing, Pulp & Paper and HVAC industries. Details Sizes : 2� to 36� (50mm to 900mm) Higher sizes available on requestRatings : ANSI 125 to ANSI 300 (equivalent on request) Applications Steel, sugar and text liquid, oil gases, chemicals, cooling water pumping stations, mixing gases, hot air blast furnaces gases, high and low temperature, high pressure, etc. Design & Performance Features Water style connection Concentric design as standa Casted body and Disc available in all grades with Special MOC as duplex super duplex and Aluminum bronzeMaterial Certification with 3.1 (Third Party) is availableMaterials passed through NDT testes (radiography, magnetic particle, Dye penetrate and ultrasonic testes) is availableDouble eccentric Disc design with flexible seats for tight Shut-offFire safe design in accordance with API 607 5th AdditionEnd ConnectionsAvailable I flanged raised and flat Face (Double flanges type), Lugged (Single Flange Type) & Flangless (Wafer type)Flanged drilling is available with ASME, ANSI, PN. DIN. JIS, and AWWA Standards

Double flap valve is continuous material discharge equipment. Double Flap Valve has a two door flap plate which open and close alternatively. As the material falls on the top plate, during continuous operation the plate opens and discharges the material on the bottom plate. After discharging the material the top plate closes. This ensures that the DFV is sealed to prevent air leakage. The bottom plate then opens after the top plate is closed and allows material to fall onto onward collecting equipment. The cycle time is precisely adjusted such that after the bottom plate closes the top plate opens. Thus ensuring continuous air sealing across the DFV. The time for which both flap are in closed condition, is known as dwell time.

• Size: 8
• Material: SS
• Pressure: 5 Bar
• Surface Finish: Polish
• Usage/Application: Industrial
• Packaging Type: Box

• Size: 63mm
• Material: Mild Steel
• Automation Grade: Automatic
• Hydrostatic Test (Body Test): Tested at 21 kgf/cm2
• Outlet: Female Instantaneous
• Water Tightness (Seat Type): Tested at 14 kgf/cm2
• Inlet Size: 2.5 inch

• Brand Name: RIECO
• Material: Stainless Steel
• Pressure: Medium Pressure
• Size: 300 mm NB
• Power: Pneumatic Actuator
• Temperature of Media: Max. 200 Deg. C

• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Color: IPL Std
• Number Of Way: 2way
• Brand Name: IPC
• Pressure Rating: #150, #300
• Sizes: 2" to 24"
• Size: 2"to 24"
• Type: Eccentric, Lug, Wafer
• Technics: Gear Operated
• Power: Hand Wheel / Gear wheel Operated
• Pressure: 1000 Kpa, 520 Kpa
• Structure: STD
• Feature: Durable
• Port Size: 50mm to 600 mm
• Media: liquid / gases
• Mfg Standards: API 609 / BS EN 593
• Testing Standards: API 598 / BS EN 12266 -1
• End Details: ASME B 16.5
• Face To Face: API 609

• Diverting angle: 34° - 40°
• Maximum solids temperature: 100 °C
• sizes: 50 NB to 200 NB
• Features: High temperature silicon rubber seals, Short changeover time

We are renowned as the eminent Tunnel Diverter Valves Manufacturer in India. Catering to the exact expectations of the clients, the company has acquired noteworthy position amidst the reliable Magnetic Tunnel Valves Suppliers. Additionally, customers are eased with the availability of the Dual Tunnel Diverter Valve in varied configurations as per the international standards.

• Material: Stainless Steel
• Operation Temperature: -20 to 100 Degree Celsius
• Max Working Temperature: 120 Degree C
• Max Pressure: 3.5 Bar
• Sizes: 60 NB, 80NB, 100NB, 125NB
• Pressure Range: 43 PSI
• Material Grade: SS 304, SS 316

• Brand: Steelmax
• Design: Floating type
• End Connection: Flange End , RF
• Country of Origin: Made in India
• Stem: SS410 / SS304 / SS316 /
• Seals: Graphite
• Leakage Class: VI
• Ball: CF8 / CF8M / F316 + Tungsten carbide / F316 + Chrome carbide / F316 + Stellite 6

• Body: Cast Iron ASTM A126 Class B / EN 1561 No.EN-Jr. 1030/ Ductile Iron ASTM A395 Gr. 60-40-18/ EN 1563 NO.EN-JS 1024/ Carbon Steel ASTM A216 Gr. WCB
• Stem: Poly Acetal (Delrin)
• Stem Bearing: Housing in Cast Iron, Gear in S.G. Iron & Worm in EN8
• Body Seat **: Stainless Steel ASTM A276 Type 410/ 304/316/ Monel

We provide a very wide range of valves alongwith a wide range of power operated actuators, we have special quality of double flanged butterfly valves.

200 NB Double disc valve, Sprockets, 250 NB Double disc valve