Effluent Treatment Plant Dealers in Pune

• Application: Water Recycling
• Voltage: 110V, 220V
• Automatic Grade: Fully Automatic, Semi Automatic
• Power: 10-15kw, 15-20kw
• Driven Type: Electric
• Features: Reliable, Quality Checked

Effluent Treatment Plant, which we offer, is widely used in the treatment of generated waste in an economic manner, as per pollution board norms. The offered Effluent Treatment Plant is very helpful in reduction of operating costs, and thus increasing profits. Effluent Treatment Plant helps in achieving more effective conformity with legislation. Also, the Effluent Treatment Plant improves company's public image. Features Optimum performanceReliableDurable finishQuality tested Minimum Order Quantity : 10 units

We manufacture & supply all categories of Disinfection system, Ozonation plant, chlorination plant, sludge dewatering system, Oil & grease removal system available. As per requirement we also supply tailor-made solutions to our clients.

We are one of the most reputed Manufacturers and Suppliers of Effluent Water Treatment Plant in India. Effluent Water Treatment Plant has automatic control on all the movements of machine. This factor reduces human interference in the operation of Effluent Water Treatment Plant. Adding to this, Effluent Water Treatment Plant doesn’t pollute the surroundings much.

• Color: Blue
• Condition: New
• Automatic Grade: Automatic

The treatment to remove organic and inorganic impurities, suspended and dissolved particles and contaminants from industrial effluent wastewater with the help of different technologies for keeping industrial environment clean and green.

From Maharashtra, India, we are providing ZLD - Zero Liquid Discharge Plants, globally. As a responsible Manufacturer, Exporter and Supplier, we ensure that the customers receive zero-defect quality ZLD - Zero Liquid Discharge Plants. For this, we test the entire lot for operational fluency, prior to final delivery. Our ZLD - Zero Liquid Discharge Plants can be customized, accordingly.

• Name: Effluent Treatment Plant
• Usage: To treat Industrial Effluent
• MOQ: one

We undertake turnkey Effluent Treatment Plants (ETP) projects for treating the effluent generated from different Industrial sectors like Chemicals, Drugs & Pharmaceutical, Automobiles, Distilleries, Refineries, Dairy, Food Processing, Rice Mills & textile etc.. Industries during manufacturing generates large quantity of toxic and hazardous effluents with considerably high BOD, COD, TS and TDS levels. Impurities like organic compounds, debris, dirt, grit, pollutants, toxic, non-toxic materials and polymers are present in the effluent. ETP plant treatment recipe mainly includes physical, Chemical and biological process followed by filtration and conditioning treatment. During the treatment Acids/Alkali neutralized to neutral the pH value. All unwanted impurities like suspended solids, process minerals etc. removed.Oil, Grease, Colour and odor removal. Material of Construction – We offer plants in civil Construction, Pre-fabricated or Containerized or Skid Mounted in MS/FRP/HDPE

We own a well-structured warehouse where the entire lot is carefully stored before making the final dispatch. The unit helps in providing protection from moisture, dust, rain, sunlight and more. As a reliable name in the industry, we offer only quality-approved products to the clients. Thus, we make use of only excellent quality raw materials obtained from trusted sources.   The main advantages of packaged STP and ETP (MBBR/FAB based) are : Compact and sturdy design Odorless Low power consumption Easy maintenance Rapid installation Specifications : Voltage - 220 V/50 HZ Sterilizing Rate - = 99.99%

• Driven: Electric
• Certification: CE Certified,ISO 9001:2008,Other
• Automatic Grade: Automatic,Fully Automatic,Semi Automatic,Other
• Application: Wastewater Treatment,Other
• Power: 1-3kw
• Voltage: 440V
• Color: Other
• Condition: New
• Weight: 100-1000kg,Other
• Type: Sludge Dewatering Machine,Other
• Warranty: 1 Year,2 Years,Other

Flow quantity of Slurry and pressure required are the basic parameters required for designing the system. However, these two parameters in turn depend on many other conditions like rate of ash to be disposed, pipeline distance, pipeline profile, density of slurry, viscosity of slurry etc. Moreover ash is highly abrasive and pipeline wear also needs to be considered. A critical aspect of system is selection of slurry velocity in the pipeline which should be low to minimize abrasion but high enough to avoid settling of Ash in the pipeline.Slurry with low or medium concentration (usually 45% to 50% by weight) can be pumped using centrifugal slurry pumps. The viscosity of slurry does not have much effect for such conditions while calculating pressure requirement, but as the slurry concentration increases the viscosity effect has a dominant effect for calculating pressure requirement. Generally ash slurry pumping beyond 65% in not feasible, as high concentration slurry requires extremely high pressure which increases exponentially as per the concentration. Such high pressures can be developed using piston diaphragm pumps. These pumps can develop very high pressures but are very costly and have a very high maintenance cost. The high pressures result in higher power consumption though the water requirement is lower in this system.

• Brand Name: Scale Aqua
• Application: Heat Exchanger & Condenser
• Features: Non Chemical, No Power , Inline Unique
• Usages: To Eliminate Scaling
• Industry Type: Plastic Industry, Ice Factories, Cold Storages, Milk Dairies Etc.

Scaling:  Scaling occurs when a mineral film coats the entire heat transfer surface of Heat exchanger OR Condenser.   These mineral deposits such as Calcium, lime, Mud and rust rob heat transfer efficiency. This increases energy cost by over 30 %.   Heat Exchangers, Condensers and even Cooling Towers therefore require DESCALING maintenance to improve their efficiency. Evaporative Condenser: When water scale is deposited on the heat transfer surface of an evaporative Condenser, the cooling water from the spray head can not efficiently condense the refrigerant gas in the coils.  As a result inadequate cooling , over worked machinery and expensive operation is incurred.   Shell & Tube Condensers: Water scale deposits in the condenser coils cause the compressor to kick out on high head pressure and lowers the cooling capacity of the unit.   Cooling Towers: Basic principle of Cooling Tower is to cool the water that has picked up heat generated by equipment within facility.  Cooling tower design enhances evaporation & allows further cooling of tower water. This water is then pumped into the facility continuing to cool the equipment Scaling within cooling tower can restrict the water distribution of spray nozzles, reduce the water flow thru the openings of a hot deck and restrict the air flow within the tower. All these conditions result in diminished cooling capacity & inefficient operation of the associated equipment in the cooling tower system.   Absorption Units: Water scale accumulating on the water side of Absorbers & Condensers materially affects the operation and efficiency of any absorber type Air-conditioning unit. The harder the water, the faster the deposit accumulates.   Scaling of Plastic Molding  Machines : Cooling is an important process in the production of injection  mold To molders, scale, caused by calcium in hard water, is a devil that forms as    Water flows through pipes, contaminating and clogging lines throughout a plant. When scale builds up in the pipes and heat exchangers on a molding machine’s hydraulic system, it causes poor heat transfer, which prevents molders from running their machines at full capacity. Similarly, when scale clogs mold cooling water passages , it creates a thermal barrier that hinders the cooling and heating of the mold. All of this adds up to wasted machine time and money. Injection molding machines are typically run at about 65 to 75 percent of their fastest cycle times because of poor heat transfer. It takes just a 1/16-inch-thick build up of scale to cause a 15 percent slowdown in a machine’s cycle because it takes longer to extract the heat. A uniform cooling process is desired to avoid defects in manufactured parts.   How to Get Rid of Scaling : Scale can not be removed by hydro blasting or typical scrubbing. The only reliable way to remove these scales is by   Descaling Agent . A Descaling agent or chemical descaler is a chemical substance used to remove limescale from metal surfaces in contact with hot water, such as in boilers, water heaters, and kettles. Descaling agents are typically acidic compounds such as hydrochloric acid that react with the alkaline carbonate compounds present in the scale, producing carbon dioxide gas and a soluble salt.  Notable Descaling agents include acetic acid, citric acid, glycolic acid, formic acid, phosphoric acid, sulfamic acid and hydrochloric acid. Descaling process needs to be done frequently Chemicals are used. So additional expenditure. Plant shut down is required resulting in loss of production. Softening plant is required. Costly man power required. All this can be eliminated by using SCALE-AQUA , a unique online non chemical No power Descaling equipment.   Advantages of Scale Aqua Installation : SCALE-AQUA, prevents deposition of hard scale in the heat transfer area. SCALE-AQUA, is fitted in existing pipeline with absolutely no changes in the pipeline. SCALE-AQUA is tested at water hardness of 5,000 PPM & TDS of 20,000 PPM  SCALE-AQUA, gives excellent water saving. SCALE-AQUA is an online equipment which is fitted just before evaporative condensers, Heat Exchanger (PHE) , and Boiler, coil, Compressors, Chilling plants.

• Voltage: 320-350 V
• Usage/Application: Industrial
• Inlet Water Quality: Waste Water
• Capacity Inlet Flow Rate: 500-1000 m3/hour
• Feed Flow Rate (cubic-meter/day): 100 m3/day
• Automation Grade: Automatic
• Water Source: Commercial Waste Water, Borewell Water
• Industry: Pharmaceutical Industry
• Water Pump Power: 1-3 kW
• Air Blower Power: 1.5 kW
• Phase: Three Phase
• Frequency: 50-60 Hz

• Type: Effluent Treatment Plant
• Application: Water Recycling
• Condition: New
• Automatic Grade: Automatic, Manual, Semi Automatic
• Treatment Technique: Clarifier, Fluidized Aerated Reactor, Bio Tower
• Installation Type: Prefabricated,Containerized Plug & Play

The Effluent Treatment Plant, provided by us, is known for its quality. To make sure that we offer only defect-free range of products, our quality experts cross check every product at diverse stages. Using premium packaging materials, we secure our products properly for transportation and label it properly to provide information such as address of manufacturer/distributors, MRP, quantity, etc.

• Automatic Grade: Automatic, Semi-Automatic, Manual
• Plant Type: Wastewater Treatment Plant

We abide by the strict delivery policies and thus, we ensure that the products are sternly packed and delivered on time. We have tied-up with the leading names offering qualitative raw material. Also, we check on several parameters prior to procurement for ensuring high quality standards. Features Advanced mechanism Purity guaranteed High productivity

All types of water treatment system, with flow control and reporting system for easy of access of plant.