Electric Cable Making Machine Dealers in Pune

• Automatic Grade: Automatic
• Body Material: MS
• Voltage: 380-440 V
• Power Source: Electric
• Frequency: 50-60 Hz
• Phase: Three Phase

• Automation Grade: Automatic
• Production Capacity: 1.5 mt / day

Schleuniger offers a comprehensive line of accessories to enhance your wire processing production methods from start to finish. All accessories easily interface with Schleuniger’s complete line of wire and cable processing equipment.

• Machine Weight: 1236 kg., 1540 kg.

Kerb Laying Machine Option of pouring either off-centre with model C 101 (i.e. left side) or between center with model CG 200 (i.e. between two rear wheels) depending upon size of the profile. Option of using hoppers of different sizes to suit the profile. Suitable for concrete depths up to 300 mm in conjunction with poker vibrators. Self adjusting “Cross Slope” facility provided to ensure mould in correct position irrespective of lateral movement of hopper. Flexibility of using 2 or 3 hydraulic pokers depending upon size of hopper and profile. Sufficient traction is available for pouring profiles in line and level. Favourable power : weight ratio. High output of up to 12 mminutes depending upon size of profile.

• Material: Metal
• Feature: Rust Proof
• Warranty: 1 Year
• Color: Multi Color
• Surface: Polished
• Use in: Gym

• Automatic Grade: Automatic
• Voltage: 240 V
• Machine Type: Hose Crimping Machine
• Frequency: 50 Hz
• Material: Steel

Features:A Pulleys travel upward downward and are fully adjustable to various position settings. Pull-up and chin-up bar allows extra feature to the unit. Additional accessories can be attached to unit to perform multiple exercises.

• Country of Origin: India
• Operating Mode: Semi Automatic
• Condition: New
• Driven Type: Electric
• Width: 2500 mm, Continuous Wire Mesh With Shearing
• Wire Dia: 1 mm To 8 mm
• Pitch: 25mm To 150 mm
• Brand: KEJETHERM

• Usage: WIRE MESH WELDING
• Wire Size: 2 to 5 MM

• Conductor/Core Diameter: 8mm to 135mm
• Finished Diameter: 10mm to 150mm

Insulating and Sheathing lines are the primary products of Royle. Royle supplies complete system for Insulation of cables with line speeds as high as 1000 MPM, which varies for different conductor sizes. All equipment in the line is selected by Engineering Experts while considering optimum performance and least down time. The extruder sizes for the Insulating line vary from 25mm to 100mm. The system is used for basic products such as House Wiring Cables and even for Category Cables. The Sheathing lines are offered with line speeds up to 100 MPM for cable diameters up to 160mm. The Extruder sizes vary from 80mm to 200mm. The accessories such as Chalk Applicator, Semiconductor Skin Extruder, Graphite Applicator, etc. are chosen as per the product specifications. The basic System consists of Pay-offMetering CapstanMain Extruder and Auxiliary Extruders with accessoriesCooling TroughCapstanSpark tester and Diameter GaugeDancer/Float RollTake-upAuto-line Control System to integrate and control the line with most modern features

We are engaged in manufacturing and exporting our widely appreciated range of Haul Off Machine. These are especially suitable to haul high density pipes. These Hall Off offered by us are made using high quality raw material in compliance with various set industrial standards.

• Capacity: 100 Mtr /hour
• Country of Origin: Made in India
• Application: For Road Construction Use
• Fuel Type: Diesel
• Condition: New
• Operating Speed: 3 Meters/min

Applying shields (caps) for sealing of bearings Checking of torque to ensure the fitment of shields Cycle time: 5 sec Tooling setting time < 20 mins Measuring station for shield fitment checking FEATURES PLC Control system: Mitsubishi / Delta Pneumatics: Festo / SMC HMI touch screen 7 inch Switch gears: Schneider, Siemens. Precise measurements using Std LVDT probes  

• Max width: 600 mm

The profound experience that we have in this industry helps us in manufacturing quality assured Wire Mesh Welding Machine. These plants are a perfect combination of modern technology and user convenience.

• Material: Stainless Steel
• Wire diameter range: 2 mm to 5 mm
• Paramter Set up: on HMI
• Welding Speed: More than 70 strokes per min
• Weld Mesh Material: Galvanised and MS steel
• Machine Size: 4 ft to 8 ft
• Mesh Pitch: 17 x 17 mm

Powerful dot marking machine capable of indenting components with deep marks. Electric Solenoid (no air connection) with programmable depth settings. Capable of marking all engineering materials up to 62HRc (800Hv), Robust mechanism and steel housing especially well suited to industrial applicationsVery large marking area especially suited to marking long inscriptions such as Chassis VIN marking. Very high speed operations, Adjustable standoff posts provide clear visibility and flexible fixturing options with custom fixturing available on request. 100 - 220v single phase supply (no pneumatics required). Press and hold’ trial run feature allows the marking location to be determined quickly before marking. Low running costs and virtually no consumable costs.

Option of pouring either off-centre with model C 101 (i.e. left side) or between center with model CG 200 (i.e. between two rear wheels) depending upon size of the profile. Option of using hoppers of different sizes to suit the profile. Suitable for concrete depths up to 300 mm in conjunction with poker vibrators. Self adjusting “Cross Slope” facility provided to ensure mould in correct position irrespective of lateral movement of hopper. Flexibility of using 2 or 3 hydraulic pokers depending upon size of hopper and profile. Sufficient traction is available for pouring profiles in line and level. Favourable power : weight ratio. High output of up to 12 mminutes depending upon size of profile.