Electric Converters Dealers in Bhosari, Pune

• Current: 35A
• Input Voltage: 240 V
• Phase: Three Phase
• Material: Alluminium
• Country of Origin: Made in India
• Usage/Application: Industrial

• Brand Name: Protocontrol Instruments

We are offering signal converters, isolators and transmitters to isolate and convert field signals like resistance, current, voltage, frequency to 4-20 ma. These isolators find use in process control industries for signal isolation. Variety of models is available for specific applications.signal converter converts field signals received from sensors like rtd, thermocouple, load cells, strain gauge to standard 4-20 ma form which is acceptable at plc or dcs for further processing. transmitters are generally head mounted and fitted in the head of temperature sensor; isolators provide further isolation of field signal so that plc side is isolated from field side. in the field, many signals are generated such as motor current, armature voltage, position feedback in the form of change in resistance or signals obtained from various types of traducers in standard voltage or current form. these signals are not isolated from input and not suitable for transmission over long distance. Converters are specially developed to overcome these problems in transmission such as line drop, interference, ground looping and non compatibility to standard processing unit. salient features includes complete galvanic isolation between input output and control supply , independent zero and span adjustments ,stable current output eliminates need for special cable, shielding, the isolators are housed in din rail mounting engineering plastic enclosure; special robust cast al. Enclosures suitable for field mounting are also available. these converters are extensively used in cement, fertilizer, chemical, and processing plants. following models are available “ sc I i I d: signal converter, din rail mounting, 4-20 ma i/p, 4-20 ma o/p st n2 p i: temperature transmitter, head mounting, rtd i/p, 4-20 ma o/p, loop powered

• Power and Field: 230 – 500 VAC, 3-phase
• Input Frequency:: 50 – 60 Hz
• Converter Fan:: 115/230 VAC, single-phase
• Control Power:: 115/230 VAC, single-phase
• Digital Inputs:: Eight (8), 24 VDC
• Digital Outputs:: Four (4), 24 VDC One (1) relay
• Analog Inputs:: Two (2), ±10 VDC, 12 bit
• Analog Outputs:: Two (2), ±10 VDC, 12 bit

Introducing the world’s most competitive DC package ABB has developed a user-friendly drive system package (DCS 400, DMI Motor) to meet the demands of machine builders. Our aim is to offer the best combination of reliable products at the most affordable price, backed by on-time delivery, good partnership and fast response to inquiries. At the heart of the drive package is the DCS 400 – a new generation of DC drives specifically designed to meet the ever-changing needs of machine builders. “Total ease of use” was the foundation of this drive’s development. The result is a drive that is: as easy to handle as an analog drive yet incorporates all of the features of a digital drive. easy to design into machine equipment, with just the right amount of features. easy to install and set-up, even by those without special drives experience. Technical Features Digital 6-pulse converter 10 – 600 Hp (10 – 448 kW) 20 to 1000 A DC Input Voltage from 230 to 500 V, 50/60 Hz Nonregenerative & regenerative drives available IGBT – field supply for field weakening is included Small Design The DCS 400’s compact design brings substantial space savings to machine builders, allowing them to integrate more accessories within the same space. Existing DC drives are easily replaced with the DCS 400. At only 103.4 in (270 mm) wide, and with all the power cabling located at the base of the drive rather than the side, two DCS 400 units can be installed inside the same 233.4 in (600 mm) cabinet. The field supply, including the fuse and choke, are integrated into the DCS 400, further contributing to its small size and simplicity of design. No need for a field voltage adaptation transformer to match the line supply voltage with that of the motor. The DCS 400 uses fewer components, leading to both smaller size and greater reliability. Small Design The DCS 400’s compact design brings substantial space savings to machine builders, allowing them to integrate more accessories within the same space. Existing DC drives are easily replaced with the DCS 400. At only 103.4 in (270 mm) wide, and with all the power cabling located at the base of the drive rather than the side, two DCS 400 units can be installed inside the same 233.4 in (600 mm) cabinet. The field supply, including the fuse and choke, are integrated into the DCS 400, further contributing to its small size and simplicity of design. No need for a field voltage adaptation transformer to match the line supply voltage with that of the motor. The DCS 400 uses fewer components, leading to both smaller size and greater reliability.

we have been engaged in offering quality assured range of DC to DC Converter. In this range, we offer SMD DC-DC Converter, 1-3W DC-DC Converter, 5-10W DC-DC Converter, Above 10W DC-DC Converter, Non Isolated DC-DC Converter and New Power Source DC-Dc Converter, to name a few. Based on industry standards, these are known for reliability, high performance and low maintenance.  we are engaged in trading quality assured range of DC-DC Converter Non Isolated. We source these from some of the leading manufacturers in order to assure optimum quality and reliability. Besides, we also offer these to our esteemed clients at economical prices and within the stipulated time period. These are also widely used in instrument, communication, security guard, fire fighting, transmission and other such industry applications.

      P TO I CONVERTOR Series 4451-TX Features 0.2 to 1.0 kg/sq.cm (3 to 15 psi) 2 wire system SS 316 diaphragm Field / Back of panel mounting CMRS approved Exproof / Weatherproof Enclosure

• Automation Grade: Manual
• Machine Type: Initek Converter
• Surface Finishing: Color Coated
• Body Material: MS
• Usage: Pouring Hot Metal

• Type: 400Hz
• Color: Navy Blue/ black
• Size: as per customer requirement
• Brand Name: BR SFC
• Place of Origin: PUNE - INDIA
• Output Type: AC 400Hz
• Input Voltage: AC 50/60Hz

static frequency converter, quasive wave inverter, Pure Sine Wave Inverters

static frequency converter, Engine Cranking Rectifier

Frequency Converter, DC Drives, electronic device, Power Inverters

Features Available in rated voltage 5V, 12V, 24V, 48V Ready designs available upto 200W Short Circuit and Overload Protections available Cooling by free air convection

signal converter, Tachometer, Automation Controller, Solid State Relays

Rotary Paper Converters

SIGNAL ISOLATOR CONVERTER, three phase energy meter

ac converters, Dc Converters

DC Boost Converter, LD Single Girder Overhead Crane

convertor, Industrial Boiler, control instrument, Electrode, Flow Meter