Electric Hammer Drill Bits Dealers in Bhosari, Pune

We are engaged in the manufacturing and supplying of Carbide Tipped Slot Drill. The Carbide Tipped Slot Drill is manufactured from fine quality material thus ensure high durability. Our Carbide Tipped Slot Drill is appreciated for its excellent finish and durability. The Carbide Tipped Slot Drill is provided in customized form to match up with the requirements of the clients. The Carbide Tipped Slot Drill can be availed at competitive prices from us. Specifications DIN 8027Parallel Shank2 Flutes with end cutting geometryCenter cutting2 Straight Flutes Range Diameter 6 to 45

• Type: Drill
• Brand Name: Nityo
• Max Hole Size: 5 mm, 10 mm
• Max Drill Depth: 0-10 mm
• No Load Speed: 0-2000
• Air Consumption: 4 cfm
• Air Inlet: 1/4"
• Chuck capacity: 10mm

• Material: Solid Carbide
• Country of Origin: Made in India
• Length: 3 Inch
• Diameter: 1 inch

• Material: Metal
• Thickness: 10-20mm
• Length: 15-20cm
• Application: Drilling
• Weight: 70-80gm
• Color: Metallic

• Material: Carbide
• Length: 5-10 Inch
• Weight: 100-250 Gm
• Bit Diameter: 5-20 mm
• Surface Finish: Polished
• Pack Type: Box
• Suitable For: Wood,Metal,Masonry

The robust design and layout of the air drill manufactured by Sumake enables it carry out noiseless drilling application. The maintenance cost of the drill is quite low.

• Material: HSS Steel
• Thickness: 10-20mm
• Certification: ISI Certified
• Application: Drilling
• Color: Metallic
• Surface Finishing: Coated

We are devotedly involved in offering the best quality array of Gun Drill. The offered array is accurately manufactured utilizing quality approved raw material and contemporary tools under the strict guidance of our skilled personnel. These products are applicable in different industries according to their uses. Clients can avail these products from us at reasonable prices.

We manufacture the highest quality of Solid Carbide Profile Drills and Cutters. Our profile tools are most accurate among the Industry.

Xtreme tooling is a leading manufacturer of solid carbide cutting tools like carbide end mills,drills and reamers.

• Material: High Speed Steel,Cobalt,Solid Carbide,Carbide Tipped,Stainless Steel
• Size: 0-1 inch,1-2 inch,2-3 inch,3-4 inch,4-5 inch

• Weight: 1000-2000kg
• Automatic Grade: Automatic
• Power: 3-5kw
• Driven Type: Electric
• Durability: Long Life
• Material: Metal

Our NPD cartridge drills offers efficient drilling solutions as JIP-DRILL Series and also called as Vulcan-Drill Series. These NPD cartridge drills are fabricated from premium quality raw material and are procured from KORLOY. Offered in customized ranges these are in high demand all across the globe in different industries   Following are the essential traits of our exclusive gamut   High efficiency Productivity indexable insert Using big hole drilling 61mm - 100mm Indexable cartridge & insert are able to pursue the economy and convenience of customer Drill diameter can be extended up to 5mm by adjusting outer cartridge An adjust bolt makes handling easy for extension of drill diameter Excellent chip control guarantees good cutting performance in deep hole drilling Various chip breakers & grades are available for variety of application

These drills are made of high speed steel and manufactured by advanced technology and thus they possess excellent cutting quality and high durability, with rational point drilling results on various material such as steel, castiron, copper and aluminum are guaranteed.   

• Features: Parallel shank, Straight flutes
• Item Code: ABT-539

• Features: Sturdiness, Longer life, High strength, Rust free nature, Durable nature .
• Item Code: JKED10

• Driven Type: Electric
• Application: Industrial

In order to achieve highly efficient drilling function use our custom & robust designed Coolant Fed Drill. These precision industrial tools enable cost reduction availing superior functionality at such a lower rate. Industrial Coolant Fed Drill Coolant fed drill is designed to give outstanding accuracy and to achieve better efficiency and cost reduction. Coolant feed drill has longer and stronger blades and their wave edges are best suited for chip mounting. They also provide excellence to the strength of the insert and are available for re-cutting, if necessary. Description: Our coolant feed drill is made from a special alloy cast iron that shows high temperature strength. Their surfaces are specially treated for resistance towards corrosion and abrasion. And as the lubricating ability of the flute is good, chip is eliminated very easily. Application: they are used for drilling into steel, cast iron, chilled cast iron, malleable cast iron, non-ferrous heavy metal, non-ferrous light metal, and abrasive plastic. Insert replacement caution: After usage, clean the holder and insert the flute using an air gun before mounting a new insert. Avoid the drill from being exposed to any shock. The performance of the drill varies between 20-40% according to the methods used for re-cutting. If the drill is not re-coated, the performance of the drill will deteriorate that can cause chipping and damage. (for better performance, we recommend our re-cutting and re-coating techniques activities) While doing re-cutting work, it is required to make the surface rough where cutting edge should be less than 1. 5s, and the height between both the blades should be within 0. 02mm. How to use: Remove the clamp screw when replacing the insert. Mount the insert when turning it towards right and turn left after adjusting the insert’s mark point to be in the direction of the screw head. Tighten the screw while pressing the end of the insert with fingers.

We bring forth for our esteemed clients a superior quality range of Drills as per their specific requirements. The Drills offered by us are manufactured using high-grade raw material and advanced facilities, at the vendors’ end.

The burnishing drill includes a cylindrical drill body connected at forward integrally with a shank.The forward end of the drill body includes the first pair of cutting edges inclined radial and at rear from the forward most central end of the drill body toward the shank at a first cutting angle.The second pair of cutting edges, which is formed of diamond chips, is disposed in a plane intersecting where the first pair of cutting edges is located, for maximum external margins of the first pair of cutting edges toward the shank at a second cutting angle.

Profile Tools can be made as per customer’s requirement the pcd profile tools are mostly used in integral shank type, sometime the same PCD Profile tools can be made integral shank.

• Capacity : 13 to 25 mm
• No Load Speed : 500 Rpm
• Power Input : 1 Kw
• Moarse Taper : MT 2
• Drill Chuck : 13 mm
• Weight : 6.2 kg
• Application : Continuous duty

• Size: 0-2 mm, 2-4 mm, 4-6 mm, 6-8 mm, 8-10 mm, >10 mm
• Material: Solid Carbide
• Length (mm): 0-30 mm, 30-60 mm, 60-100 mm
• Minimum Order Quantity: 10 Piece

• Material: CARBIDE
• Usage: CUTTING
• Packaging Size: BOX

• Application: Suitable for drilling,Heat Resistant Steel,Chilled Casting

• Type: Magnetic Base
• Material: Metal
• Application: Industrial
• Feature: High Quality
• Model Number: Ul-50416
• Brand Name: Ultra
• Place of Origin: India

The company is bracketed among the distinguished Manufacturers, Suppliers and Exporters of Magnetic Base UL-50416 Series from Maharashtra. Magnetic Bases we make available can be locked to any position in 360° by a central lock. Bearings are provided on the Magnetic Base for easy working and rigid locking.   "Ultra" Brand Universal Clamping Magnetic Base with fine adjustment : Used as a holding device for dial indicator. Heavy & rigid construction of base & column. Bearings are provided for easy working & rigid locking. Can be locked to any position in 360o by a Central lock. Dovetail slot for lever type dial. Fine adjustment for accurate setting. Can hold 8mm stem diameter of dial.

• Size: 1mm to 32mm
• Brand Name: BTTPL
• Material: CARBIDE
• Length: 50MM TO 300MM
• Condition: NEW

All dimentions and geometry can be manufactured as per component requires.

• Type: Rock Bolt
• Material: Hollow And Solid Rock Drill Steel
• Color: Black
• Condition: New
• Finishing: In Black
• Country of Origin: India
• Use: Mines
• Size: Available In Different Sizes
• MOQ: 2000 pieces

glass edge polishing machine, Pneumatic Grease Pump, Hydraulic Toe Jack