Electric Actuators Dealers in Pune

Thomson company having manufacturing facility at sweden & usa develops linear actuators, linear guide units, lifting unit,ball screw & nut,bearing linear units with load range max. 40,000 n, speed up to 10 mtr/sec ; stroke length up to 12 mtr application scope : - replacement of hydraulic & pneumatic cylinder push, pull, lift, turn application with niche control requirement low weight unit for material handling machine building, axis motion special purpose machinery market served :- on –off highway vehicles robotics and industrial automation construction equipment machine building agriculture & forestry equipment handicap vehicles & medical equipment

• Type: N
• Material: N
• Brand Name: N

We are the main supplier of this product.

The "Emtork" Electric Actuators are electromechanical units used for operating the final control elements like valves or dampers to control the flow of fluids flowing thru the pipes or ducts. The specific advantages of using these units are : Ease of operation. Remote control facility. Proportional action of final control element in close loop system. Attaining & holding the desired preset position of the valve/damper. Various indications & alarms are available on the remote control panel & also on the unit. Emergency manual operation possible in case of power failure. Works on most convenient & easily available source of energy i.e. electricity. Models available to cover wide range of valves & dampers. Units with Integral starter will save cost of cables. Units with Electronic controller will facilitate field programming. Design The Basic design of the Emtork Actuator consists of an electric motor, reduction gear unit and control compartment. Various models have been developed to suit operating torque, speed, process parameters, area of operation etc. Additional supplementary spur and worm gear boxes are offered to get higher operating torques and quarter turn motion. Linear motion actuators have been developed to impart the required thrust to operate globe valves. The models are available for on / off and regulating duly and also for hazardous area application.

The company introduces itself as one of the major pneumatic rotary actuators importers and suppliers based in india. Fabricated using top quality raw materials, these pneumatic rotary actuators are very endurable. Our team of experts stringently inspects our pneumatic rotary actuators to ensure flawless performance and longer life. Moreover, the clients can avail these industrial grade pneumatic rotary actuators at the market leading prices. specifications double acting / single acting / 3 - position pneumatic actuatorsseries : ra da/srbody material : extruded aluminium, hard anodized (for types ra32, 40, 60,80,1 00 and 120)cast aluminium, impregnated and epoxy painted (for types ra143, 160, 200 and 400)torque : da series: 9 nm 2900 nm; sr series: 11nm 1600nmpinion : steel (nickel plated); stainless steelgaskets : nitril rubber, -20o / +80o cbearings : easy sliding hard plasticactuator/valve connection acc. To iso 5211solenoid valve connection acc. To (3/2 or 5/2) namurpositioner and limit switch box conn. Acc. To namurair supply : 4 - 6 barseries : ra 32 – ra 400 ( 2 - 3650 nm)supply air pressure : 2, 5 - 8 barconnection : iso 5211 standardoptional : stroke adjustment available applications ball valvesbutterfly valveson-off or proportional controldampers types available double- single acting / 3 position / 180o

• Material: Mild Steel
• Features: Highly durable, Long lasting, Fine finishing
• Handle Material: Plastic
• Finishing: Coated
• Packaging Type: Box
•  :  

• Type: Actuator
• Material: Stainless Steel
• Color: Metallic
• Finishing: Polished
• Warranty: 6 Months
• Quality: Best

Servo Linear Actuator is designed to be used as mechanical system to induce or control motion. Based on advanced technology, Servo Linear Actuator transforms an input signal (usually electrical) into motion. The Servo Linear Actuator ensures precise control in microns over the motion of actuator. Servo Linear Actuator uses DC motors coupled with high efficiency gearing. Servo Linear Actuator is provided with a ball screw or lead screw/nut assembly, which translates the rotary to linear motion. Servo Linear Actuator has a position transducer and fail-safe brake in a robust structural design.

• Type: Electric Actuators
• Material: Aluminum, Brass, Carbon Steel, Stainless Steel
• Application: Gas Valve, HVAC System, Liquid Valve
• Color: Blue, Green, Red, White
• Voltage: 110V, 220V, 380V, 440V
• Power: Electronic
• Pressure: High Pressure, Low Pressure, Medium Pressure, Vacuum
• Port Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch
• Number Of Way: 2way, 3way, 4way

• Brand Name: Hollow Rotary Actuator
• Material: Stainless Seel
• Type: Hollow Rotary Gearbox
• Country of Origin: Taiwan
• Usage: Robotics, Pharmaceutical Machinery, Food Packaging Machinery, Chemical Machinery
• Specialities: High Performance

Nominal output torque: 3 Nm to 90 Nm Backlash : 0.5arc-min Direct attachment with simple and reliable design. Large hollow rotary table for concise wiring and piping. Accurate and fast positioning. Repeat origin returns easily.

The "Emtork" Electric Actuators are electromechanical units used for operating the final control elements like valves or dampers to control the flow of fluids flowing thru the pipes or ducts. The specific advantages of using these units are : 1)Ease of operation. 2)Remote control facility. 3)Proportional action of final control element in close loop system. 4)Attaining & holding the desired preset position of the valvedamper.

• STROKES: 50
• MAXIMUM PORTABLE MASS (HORIZONTAL): 110kg
• MAXIMUM SPEED: 1600mm/s

An outer rail system guide is built in which a body and a guide are integrated. It improves radial performance, is more resistant to offset work, and reduces the need for side-by-side guides.

• Type: Linear Actuators
• Material: Aluminum,Steel
• Color: Black
• Feature: High Strength
• Pressure: High Pressure
• Country of Origin: Japan
• Surface Finish: Different Coated
• Valve Motion: Electric Actuator,Linear Motion Valve

The Linear actuator comprises an aluminium base combined with an LM Guide, a standardized top table, drive system, and so on. The free selection of main parts from a rich collection of options enables users to realize specifications optimal for particular applications.

  Two Coil with Power Economiser Sintered Bush Bearings, Din Plug Coil Connection Built in rectifier for AC Input Supply Energize to lock or Unlock Low Noice High Speed Operation Long Stroke, High Push/Pull

• Country of Origin: Made in India
• Stroke Length: up to 700 inch
• Load Capacity: 200 N
• Device Type: servo hydraulic linear actuators
•  :  

Options from 26 to 80 mm diameters. Choice of step sizes from 0.001 to 0.002 inches. Thrust ratings up to 114 N. Economic pricing ideally suited to OEM users.   Digital Linear Actuators - Ø 26 mm, Ø 47 mm, Ø 74 mmMaximum travel up to 300mm, choice of linear step sizes: 0.001" & 0.002". Thrust up to 88N.         Digital Linear Actuators - Ø 42 mmMaximum travel 24.1mm, choice of linear step sizes: 0.001", 0.002", 0.004". Thrust up to 114N.         Digital Linear Actuators -Ø 26 mm Maximum travel 48mm, choice of linear step sizes: 0.001", 0.002", Thrust up to 28.1N.       Digital Linear Actuators - Ø 35 mm Maximum travel 63.5mm, choice of linear step sizes: 0.001", 0.002", Thrust up to 20.9N.       Digital Linear Actuators - Ø 42 mm Maximum travel 61mm, choice of linear step sizes: 0.001", 0.002", Thrust up to 100N.

Automation tekniks is one of the reliable electric actuators manufacturers, exporters & traders. We offer electric actuators for high pressure globe & gate valves for on / off and regulating duty applications. They can be mounted directly on valves or the motion can be transmitted thru linkages depending on site conditions. The actuators are available with 230 / 110 vac v ac 1 phase or 415 v ac 3 phase motors to suit various valve sizes and operating pressures. The required standard and optional accessories are available to meet the specific process requirements. The service back up is also available for commissioning, to over-come initial troubles, and also to calibrate the unit with dcs / qcs compatibility. technical specification

The Type 3278 pneumatic rolling diaphragm actuator is designed for all industrial applications. This actuator is a rotary motion device ideal for all types of rotary valves. The torque output of the actuator depends on the actuator area, pneumatic supply pressure, spring stiffness, distance traveled, initial compression of the spring, the number of springs internal to the actuator, etc. FEATURES & BENEFITS Field-reversible, multi-spring diaphragm actuator allows changing of fail-safe action Multi-spring actuator offers uniform application forces as well as reduces height and weight. Rolling diaphragm offers increased precision and reduced hysteresis compared to stretching diaphragms. External travel stops are easily adjusted to prevent over rotating valve beyond fully seated or fully open position. Direct attachment of control valve accessory is possible with one external pneumatic connection required. SPECIFICATIONS Size:160 and 320² Max. Rotation:90° Max Torque:730 Nm Options:Reversable fail action, Travel stops

• Structure: Butterfly
• Voltage: 415V AC
• Power: Three Phase
• Pressure: Medium Pressure
• Actuator Type: Electric Actuator
• Brand: Flowtork
• Stroke Length: 3-29/32"
• Valve Motion: Rotary Motion Valve

Valve automation is need of the process industry and Rotary Actuator is key element of valve automation. Schrader Duncan Limited launches �MaxFlow� range of Pneumatic Rotary Actuators. These actuators are available in spring return Single Acting as well as Double Acting models. Torque out put range is from 3 Nm To 4000 Nm for 0� to 90�, operating pressure range from 3 to 8 Bar. These are compact design actuators with standard mounting interface.

The electric wastegate actuator from MAHLE ensures the best possible interaction between the combustion engine and turbocharger, especially in downsizing engines. This novel technology allows very high actuation speeds and very precise boost pressure regulation. The electrical actuator can reach any desired wastegate position in a flash, regardless of the negative or positive system pressure. Its high clamping force ensures minimal leakage and consequently rapid boost pressure build-up. The result is very spontaneous responsiveness. Another advantage of the electrical actuator is the ability to open the wastegate completely. This allows the catalytic converter to light off quickly, thereby reducing exhaust gas emissions and fuel consumption, which is crucial to customers.