Electrical Circuit Breaker Dealers in Baner, Pune

• Brand Name: Span
• Model Name/Number: EKI 2728
• Power Consumption: 5.8 W
• Dimensions: 30 x 140 x 95 mm
• Operating Humidity: 10 to 95 %
• Operating Temperature: -10 to 60 deg C
• Model No: EKI 2728
• Transmission Distance: Up to 100 m
• Transmission Speed: Up to 1000 Mbps
• Connectors: 8 x RJ45
• Power Input: 12 to 48 V DC
• Fault Output: 1 Relay Output
• Storage Temperature: -40 to 85 deg C
• Storage Humidity: 10 to 95 %

• Network Speed: 10/100/1000 Mbps,IEEE802.3af/at/PoE++
• Differential mode surge voltage: 4KV (8/20us)
• Common mode surge voltage: 6KV (8/20us)
• Response Time: Less than equal to 5ns
• Brand: San Telequip
• Model Name/Number: SP PR10G

A surge protector is an electrical device commonly used to protect computers and related computer components from power surges. To fully understand what a surge protector does, you must first understand what a surge is. The typical electrical wiring found in homes (in INDIA) and offices, carries a standard voltage of 230 volts. If a spike or surge in the voltage occurs, causing the voltage to surpass the norm, damage can occur to the computer equipment. Electrical surges can occur from a number of sources, namely: lightning and the basic surges that occur while turning on the motors and compressors for refrigerators and air conditioners to name a few. A spike is a brief increase in the voltage intensity and a surge is an increase that endures a bit longer than a spike. In either case, the voltage increases generally endures for less than a second. Surge protectors can prevent many of the problems resulting from spikes and surges. A surge protector, often set up in strip or box form, contains a number of receptacles to plug equipment into. The surge protector itself is then plugged into a standard outlet. While it serves the basic purpose of giving homeowners and business owners additional receptacles to put to use, the greater impact of surge protectors is measured in terms of the protection they offer if a surge occurs. Though surge protectors come in all shapes, sizes, and price ranges, the typical model will route the increased voltage present during a surge to a grounding wire housed within the surge protector, thus allowing the normal 120 volts to continue on to the components plugged into the protector. Some models also have a fuse within the surge protector. These models work much the same way as a fuse or circuit breaker within a standard home or office electrical panel. When a surge occurs, the protector will route the increased voltage to the grounding wire, but if the voltage is too great, it will blow the fuse and the power to the computer components, for example, will be terminated. Though the computer lost power, at least it is protected and able to function once the surge protector fuse is replaced. EMERSON TVSS are the product unbeatable in that class of technology. Please go through the catalogue attached understand more about EMERSON TVSS.

• Customized: 11KV ATS - 630 & 1250 Amps

PowerCommand® Transfer Switches provide safe, dependable power transfer between sources.Automatic Transfer switches are available for following applications:Generator to Generator, Utility to Generator, Utility to Utility.

• Supply voltage: 3 Phase, 415 VAC +-10% 50Hz
• Mounting: DIN RAIL
• Dimensions: 63(W) X 72(H) X 114(D) ,mm.
• Trip Time delay: 50 msec.
• Output: Two Potential free Relay contact of 5A rating
• Output Contacts: Two Change over .( C- NO- NC),Rating 5 A at 230 VAC

Protection of 3 Phase devices against Over voltage, Under voltage,Single Phasing, Reverse Phasing & unbalance supply are one of the major issue in electrical systems. For safe running of 3-phase devices, special protections that keep a continuous watch on supply conditions are very essential. The major cause of maximum load burn-out is overloading which occurs due to unbalance supply, Single Phasing & Reverse Phasing conditions. VMR3P detects such Conditions & protect the load from burn out. 'PROTON's LVM 3P' offer above protections along with 3 digit display showing R-Y,Y-B,BR voltages in scanning mode with precise accuracy. LOW/HIGH voltage tripping to ensure trouble free running of 3-phase Loads. Additional auxiliary supply not required.     Latest micro controller based technology. Wide range of supply variation. Unit also works with one phase is present. Additional auxiliary supply not required. Protection against Under voltage. Protection against Over voltage. Single Phasing & Reverse Phasing protection. Reverse Phasing Protection can be bypased through settings. Trip delays for all protections. Set Parameters are easy to handle with simple trimpot.   LED indication for status of relay & Power.

• INPUT : 0/4 to 20 mA DC or 0/1 to 5 V DC O to 10 VDC,Pt 100 T/C
• OUTPUT : 0/4 to 20 mA DC O to lO VDC
• INPUT : Less than 100 V for 4 to 20mA
• IMPEDANCE : >100kforOto10VDCi/p
• OUTPUT LOAD : 500 V Max. for 4 to 20 mA
• INPUT-OUTPUT : 2 kv DC FOR 60 sec.
• ISOLATION ACCURACY LINEARITY OUTPUT : 0.25% of F. S. 0.25% of F. S. 28 mA max.
• CURRENT LIMIT ZERO-SPAN ADJUSTMENTS : By multiturn trimpot
• OUTPUT : 24 VDC, 50 mA optional
•   :  
• OPERATING TEMP : 10 to 50 °C
• OPERATING HUMIDITY : 90% Rh N. C. max.
• TEMPERATURE DRIFT : 200 ppm
• DIMENSIONS MOUNTING : Wall Mounted type DIN rail Mounting.
• WEIGHT MODEL : 1.5Kgapprox. 405 - Dual output with DIN rail housing 406 - Dual output wall mounted type with 24 v DC output 407 - Five output with DIN rail housing.

Electrical Parts, Solid State Relays

transient voltage surge suppressor, Active Power Filter

temperature switches, process control equipment

thermal overload protection relays, Ptc Thermistor, solicitor

Capacitor, Harmonic Filter Reactor, Reactors, APFC / RTPFC Panel

Serial Communication Converter

Electrical Switchgears

Automatic Thermal Protector, Electro Magnetic Switch, Lugs NTC Thermistor

Modular Circuit Breakers, Load Managers & Energy Meters, Pull Cord Switches

Modular Switches