Electrical Circuit Breaker Dealers in Warje, Pune

• 0.16 to 850 A • 3 phase unbalance protection • Temperature Compensation    -25o to +60oC • Protection against long starting • Multifunction Selector    Manual reset    Manual reset and Stop    Automatic reset    Automatic reset and Stop • Contactor and Base mounting • Class 10, 10A, 20 and 30 characteristics

• Feature: Optional fully copper/High grade copper bonded steel construction

Our system is single point grounding system. We design lightning arrester to give maximum protection against direct lightning strikes.Charge dissipation technology uses the point discharge principle to facilitate the dissipation of a build-up of static charges. The sole purpose of static dissipation product is to reduce the accumulation of electrical charges and thereby prevent an electrical arc or an electrical current flow that can cause damage.This same technology has been successfully applied to the lightning protection industry by developing product line that can be mounted on the structures to reduce the accumulation of ground charge.

• Brand Name: Netgear
• Area Network Type: LAN Capable
• Device Type: DLINK
• Model Name/Number: DES 24 PORT
• Ports: 24 PORT
• Data Rate (Mbps): 10/100/1000
• Number of Ports: 24
• Switch Capacity: 92 GBPS

The specific purpose of the INGESCO lightning rod is to produce ionization directed at the cloud, so that any possible electrical discharge can be channelled from the very beginning. Between the exciter set, which has the ame potential as the surrounding .air, sand on the other hand, the point and the deflector set, which are both at earth potential, a potential difference is stablished. This potential difference will be greater, the higher the atmospheric potential gradient is, and consequently, when the lightning formation is most likely.

Indotech introduces lightning arrester that provides three phase comprehensive for grounding solution and lightning protection. Our system is single point grounding system. We design lightning arrester to give maximum protection against direct lightning strikes.Charge dissipation technology uses the point discharge principle to facilitate the dissipation of a build-up of static charges. The sole purpose of static dissipation product is to reduce the accumulation of electrical charges and thereby prevent an electrical arc or an electrical current flow that can cause damage.

Highly puncture-resistant PE separator minimizes the possibility of internal short circuits, Suited for frequent and long power cuts, Faster recharge, less pollution and environment friendly.

• Material: Copper
• Application: Industrial Use
• Color: Brown
• Feature: Easy To Install, Electrical Porcelain, Sturdy Construction
• Warranty: 1year

Manufacturer & Exporter of Static Var Compensator. Our product range also comprises of Heavy Duty Capacitor, Automatic Controlled Capacitor Bank and Filter Banks.

• Country of Origin: India
• Type: Limit Switches
• Material: Plastic
• Shape: Rounded
• Color: Multicolor

IONIFLASH MACH protects against all lightning strikes, positive or negative, by activation of the internal system released by atmospheric induction. The ionization created at the coaxial spark gap top by generation of electric arcs, in a fraction of a second, increases the conductivity of the air and the speed of the propagation of the upward leader. Being propagated towards the cloud, this discharge, generates an electric field.

• Material: Brass
• Size: Standard
• Color: Golden
• Finishing: Polished
• Type: Solid
• Shape: Round
• Country of Origin: India
• capacity: 2 mm to 20 mm

An electronic temperature switches is there to prevent equipment from running when oil temperature water temperature exceed a safe value. The device is supplied with thermo-well it can with stand 35 bar pressure. Rating & trip temperature : 105 ± 5 0 116 ± 50 c ; 96 ± 20 c ; 85 ± 20 c contact rating : spdt (1 no, 1nc) 115 v ac 5 amps12 v24 v dc

• Phase: Single Phase
• Voltage: 220 V
• Switch Type: Selector
• Current Rating: 6 Amp
• No. Of Poles: 3
• No. Of Way: 2
• Brand: L&T
• Model Name/Number: Salzer

• Size: 2 Inch, 2.5 Inch, 3 Inch, 3.5 Inch
• Type: Kvm Switches
• Material: ABS, Brass, Plastic, Polycarbonate, PVC
• Shape: Rectengular, Square
• Certification: ISO 9001:2008
• Application: General, Home, Office, Residential, Restaurants
• Color: Brown, Grey, Light Pink, Multicolor, Pure White, White
• Design: Customised, Matrix, Standard
• Condition: New, Used
• Mechanical Life: 1 Year

Nikhtish animal isolators are specially designed to protect laboratory personnel, the environment & the laboratory animal or any combination of the three, from contaminants & allergens.

These Switches are designed for Man and Machine Safety, to avoid accidents, and for stopping the Machine in case of Emergency. In Belt Conveyors, belt swaying occurs due to uneven loading, misalignment of the idlers & due to worn surfaces. Belt Sway Switches are useful to restrict belt sway within the tolerable limits. Belt Sway Switch is mounted on both sides of belt conveyors preferably every 15 to 20 meters.

• Poles Number: 2 Poles
• Classification: Type B

Surge Protection Device, Servo Straightener Feeder, Uncoiler Machine

Global Transient Voltage Suppressor (TVS) Market research report gives a systematic and competent approach to gather important statistics of Global Transient Voltage Suppressor (TVS) industry. In which includes industry chain structure, Transient Voltage Suppressor (TVS) market classification, dominant market players, product definition, and product scope. Global Transient Voltage Suppressor (TVS) Market research report also interprets different market scenarios along with future market trends. Global Transient Voltage Suppressor (TVS) research report performs SWOT analysis to gain better insights on Strengths, Opportunities, and Threats muddled in Transient Voltage Suppressor (TVS) industry. Transient Voltage Suppressor (TVS) Market dynamics, production capacity, consumer volume, supply to demand ratio, Transient Voltage Suppressor (TVS) market share and revenue is also deliberated in this research report.

• Tolerances:: From
  2°C
• Controlled differentials:: From 4°C

Thermal overload protector the well proven snap-action principle, the V1 Series thermostat combines insert moulded construction with robust metal parts to provide an extremely versatile and reliable control. Available with or without a cover, the thermostat is offered in both normally open and normally closed configurations.

A surge protector is an electrical device commonly used to protect computers and related computer components from power surges. The typical electrical wiring found in homes (in INDIA) and offices, carries a standard voltage of 230 volts.

We are among the recognized names in the industry for manufacturing and trading Lightning Arrester. The offered arrester is made from high-grade materials for ensuring the industry standards. This arrester is durable, latest in design and is used for arresting lightning for providing protection against fire breakouts and leakage of current through electric circuits. Features:    1.Optional fully copper/High grade copper bonded steel construction.    2.Light in weight and easy to install.    3.Corrosion resistance.    4.Large section of mounting hardware.    5.Independent tested.

PEPI make Snap Action Thermal Overload Protectors are cost effective solution for protection. Available with various bimetallic elements to match the current sensitivity of the device. Features: Conductive bimetal construction; the bimetallic element carries the circuit current for maximum sensitivity under short circuit conditions. Snap action device; quick make break switching action. Temperature differential between opening temperature is ±5°C Temperature differential between closing temperature is 30°C: ±15°C(tolerence) depending upon the no-load calibration temperature. Metal case is electrically alive; insulating sleeving is available. Preset calibration temperature; not adjustable in the field. Customized lead lengths and configuration are available. Main application: Shaded Pole Motor Control Transformers Electronic Ballasts Solonoids Printed Circuit Boards

• Input: 0 – 20 / 4 – 20 mA
• Output: 0 – 20 / 4 – 20 mA

ESD's signal isolators are suitable for connecting field signal from sensors to PLC's with isolated ground loop. These isolators prevent noise and RFI EMI interference being transmitted to the instruments.

• Voltage: 415 Volt
• Rated Current: 32 Amp - 1000 Amp

Surge Arresters, Butterfly Valves, Check Valves, Non Return Valve

Electrical Switchgear, Solar Panel, Electrical Contractors

surge absorber, smd resistor, Toroidal Core, Smd Power Inductor

temperature switches, High Pressure Pumps, desalination plants equipment

time switch, Cable Wire, Electrical Fittings, modular switch