Electronet Equipments Pvt. Ltd. Kondhwa, Pune, Maharashtra

The Turbine Flow meter is used for the measurement of liquid flow rate. It works on the principle of Turbine. A turbine flow meter is constructed with rotor and blades that use the mechanical energy of the fluid to rotate the rotor in the flow stream. Blades on the rotor are angled to transform energy from the flow stream into rotational energy. The rotor shaft spins on bearings - When the fluid moves faster, the rotor spins proportionally faster. 

Electronet series TX-100 are Trip Amplifiers with single input, dual trip output specially used for various industrial applications. It can interface inputs like Current or Voltage and provide isolated output in terms of Current or Voltage. The compact design saves inner space required in panel to mount the instrument.

Electronet series ELTAR-20 Radar Level Transmitter is high frequency level measurement instrument with the maximum measuring distance upto 30 meters. The antennais further optimized and the new-type microprocessor can perform higher rate of signal analysis and processing, making the instrument available for complex measurement conditions such as reactors and solid silos.  

Electronet series TX-20 are Signal Isolators with single input, dual output specially used for various industrial applications. It can interface inputs like Current, Voltage and provide isolated output in terms of Current or Voltage. The compact design saves inner space required in panel to mount the instrument.  

Electronet Series DPI-160-1 is Single Channel Bar-Graph Indicator specially designed for various industrial applications.These can be used for monitoring parameters like Temperature, Humidity, Pressure, Flow, Speed, Level etc. The input and measuring range are settable through the keypad on front fascia and control output is available at the rear terminals. Retransmission output and communication port with Bar-Graph indication are additive features of DPC-160-1.

Electronet series TT-01 are Head mount or Din rail mount type temperature transmitters used for various industrial applications. It can accept input from RTD, J and K types of thermocouples. The temperature signal is transmitted in the form of electrical 4 - 20 mA signal. Span / Zero adjustments are easily accessible. These transmitters are suitable for any make of sensor.  

Electronet series SC-204 is unique micro-controller based 8 /16 channel dedicated/universal input process scanner. It is in most miniature size with multiple features. SC-204 can accept the input like RTD, Thermocouple, mA, Voltage, mV and display its processed value with optional alarm settings and communication port. All operating parameters are programmable through front membrane keypad. Individual LED display available for channel number, process value and engineering unit.  

PRODUCT DESCRIPTION :   Electronet series PT-22S is Electronic Pressure Transmitter & Switche for fast, easy & trouble free operation. These switches are designed to cover a majority of industrial applications such as gas, liquid etc. Analog output is 4-20mA & Pressure switch output is 2Amp. Optocoupler phototriac & a power triac combination is used for switching, Optocoupler phototriac switch acts as an isolated driver and thus enables the driving of power triac by micro-controller. 

Electronet series Digital Pressure Gauge - PG 20 are pressure gauges for fast, easy & trouble free operation. These can be cost effective and ideal for monitoring the pressure. Display shut-off facility is provided so that display can be made 'ON' only if required through push button. Thus it saves the battery power & results in long lasting battery operation.  

Electronet series orifice plate is the most common differential pressure primary flow element. It is based on proven technology. It has no moving parts and is suitable for high temperature and pressure applications. Orifice plates are recommended for clean liquids, gases and low velocity steam flows. Flow measurement using orifice plates requires the accurate location of up stream and downstream pressure tapping. Various types of orifice carrier assemblies are available to suit a wide range of applications.  

Electronet series Magnetic Liquid Level Gauge ELMLG-100 is an instrument for indicating the fluid level. It has a magneticfloat inside of the non-magnetic chamber and an indicator outside of it. The indicator indicates the fluid level by means of magnetic force of the magnet installed inside of the float. The indicator is completely separated from the chamber. The level of liquid and gaseous phases can be distinguished clearly by the Bi-color. Magnetic level indicators are low-maintenance alternatives to sight glasses and other level indicators. They provide non-invasive level indication while reducing leak points and fugitive emissions.

Electronet series TX-00 are Loop Powered Isolators with signal conversion specially used for various industrial applications.It can interface all types of inputs like RTD, Thermocouple, Voltage and provide isolated mA output. The compact design gives elegant aesthetic and also saves inner space required in panel to mount the instrument.

Electronet Series DPC-100 is Universal Input Process Indicator / Controller specially designed for various industrial applications.These can be used for monitoring and controlling parameters like Temperature, Humidity, Pressure, Flow,speed, Level etc. The measuring range and control points are settable through the keypad on front fascia and control output is available at the rear terminals. Retransmission output and communication port are additive features of DPC-100.

Electronet series FL-244 are Micro-Controller Based Flow Indicator Totaliser designed for various industrial applications. These can be used for indication & totalisation of flow. The input can be processed linearly or square rooted. The built-in battery backup is provided for the memory to avoid loss of data in case of power failure. The micro-controller based design provides full flexibility for flow metering applications.

Electronet series ELMAG™ - 600W are Battery Powered Flow Meter is ideal when connecting to a power is difficult or expensive. When no mains power is available, a battery powered ELMAG-600W gives the flexibility to install a reliable water flow meter virtually anywhere without distorting accuracy & performance. ELMAG™ - 600W is provided with long battery life. ELMAG-600W is extremely easy to use, simple to install into position & no regular maintenance required. The product is engineered for various industrial as well as domestic applications such as 'Municipal & Industrial water applications, Cooling tower water treatment, well usage reporting' etc. The LCD graphic display provides indication for flow rate & totalised flow with key selection. The display will auto shut off after 10 min. Which saves the battery life. The display can be made ON by pressing the 'enter' key. IT'S AN ELECTRONIC WATER METER Note : The meter must be opened by only Electronet's authorised service center by means of special tools. if the meter has been opened and seal have been broken, then the meter will no longer be valid for billing purpose. Furthermore, the factory guarantee no longer applies.

 Electromagnetic Flow Meters are based on FARADAY'S LAW OF INDUCTION. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted integral to the sensor or remotely either with a field mount kit. These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like Juices, Milk, Municipal or Industrial Water etc. These meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc.  PRODUCT DESCRIPTION : Electronet series ELMAG™ - 200 are micro-controller based full bore type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to its simple and rigid design, the flow meter is an obstruction-less and maintenance-free instrument in place of conventional mechanical flow measuring devices. The use of 'Pulsed DC' technology offers highest ability and better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range. Electronet Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.  

These can be cost effective and ideal for monitoring the temperature. Display shut-off facility is provided so that display can be made 'ON' only if required through push button. Thus it saves the battery power and results in long lasting battery operation.  

Electronet series DIAM-151KK is a Loop Powered Bar-Graph Indicator specially designed for various industrial applications where external power supply is not easily available. These indicators can be used for monitoring various parameters like Temperature, Pressure, Flow, Speed, Level, etc. The indicator is powered from the 4-20 mA loop signal. The signal indication is displayed on the 5 digit 0.3" LED display as well as on the 51 segment tri-colour bar-graph. Range is programmable through the front membrane keypad. The voltage drop across the loop terminals is approximately 3.6 V DC @ 20 mA.

Electronet series CT-100S are Conductivity transmitters used for various industrial applications. It can accept input from conductivity electrode of cell constant 0.01 / 0.1 / 1 & conductivity signal is transmitted in the form of electrical 4 - 20 mA signal. The on-line conductivity indication is provided through LCD. Span/Zero adjustments are easily accessible. 

Electronet series LCS-02 are Capacitance Type Level Switches. The vessel wall & probe forms two electrodes. If the vessel is of non-conductive material, the probe will be double rod type. The distance between the electrodes and surface area of the electrodes remains unchanged. The variable is the depth of the material being measured which represents the dielectric constant between two electrodes. Air and vacuum have relative dielectric constant as 1 and that of liquids is greater than 1. The capacitance of the capacitor therefore depends on how much material lies between the probe and vessel wall i.e. whether the probe is covered with or free from material. The capacitance changes with change in level of the material & provides switching output at the desired preset level.

WORKING PRINCIPLE : Electromagnetic Flow Meters are based on FARADAY'S LAW OF INDUCTION. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted integral to the sensor or remotely either with a field mount kit. These meters are also called as Magflow or, EM Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like Juices, Milk, Municipal or Industrial Water etc. These meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc.  PRODUCT DESCRIPTION : Electronet series ELMAG™ - 600 are Battery Operated flow meters. It is ideal when connecting to a power is difficult or expensive. When no mains power is available, a battery powered ELMAG-600 gives the flexibility to install a reliable water flow meter virtually anywhere without distorting accuracy & performance. ELMAG-600 is provided with 2 years continuous battery operation. It is extremely easy to use, simple to install into position & no regular maintenance required. The product is engineered for various industrial as well as domestic applications such as Munciple & Industrial water / Waste Water applications, Cooling tower water treatment, well usage reporting etc. The graphical display provides indication for flow rate & totalised flow with key selection. The display will auto shut off after 10 min. Which saves the battery life. The display can be made ON by pressing the 'enter' key. The totalised value of a day is get stored in the data logger. Low battery indication is provided through software on display & flow meter will perform the expected results just replacing the battery.   Electronet Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.  

ASIONIC® - 400W is designed to measure the velocity of a fluid in a sealed pipeline fitted with transducers. This enables calculation of flow and volume based on time of flight principle. ASIONIC 400W is a static water meter which has no moving parts to avoid wear and tear. ASIONIC® - 400W is an integral and hermetically closed static water meter intended for the registration of cold and hot water consumption. ASIONIC® - 400W is constructed as a vacuum chamber of moulded composite material. Thus, the electronics are fully protected against penetration of water. This means that the meter can be work without problems in water submerged locations. The meter can and must only be opened by Electronet's authorised service center by means of special tools, if the meter has been opened, and seal have thus been broken, the meter is no longer valid for billing purpose. Furthermore, the factory guarantee no longer applies. The water meter is powered by an internal lithium battery with up to 10 years lifetime. the battery can be changed by one of the Electronet's authorised service center / personnel. The electronic unit having inbuilt LCD display to continuously indicate and log / record the following parameters:

Electronet series ULT-200B is a Battery Operated Ultrasonic Level Transmitters specially designed for non contact type level measurement. Ultrasonic level measurement is based on the time required by ultrasonic pulses to travel from sensor and surface of liquid and back to sensor. Ultrasonic level transmitters are the best for applications such as slurries, corrosive liquids and waste water without obstacle throughout the beam. The transmitter provides local indication through LCD. 

Electronet series AFG-20 is Digital Air Flow Gauge for fast, easy & trouble free operation. The flow gauge works on differential pressure flow measurement principle. These can be cost effective & ideal for monitoring the flow rate of compressed air. Display shut-off facility is provided so that display can be made ‘ON’ only if required through push button. Thus it saves the battery power and results in long lasting battery operation.