Electronic Test Instruments Dealers in Dighi, Pune

• Brand Name: USIS
• Application: Laboratory
• Retransmission Output: 4-20 mA or RS485 Modbus
• Relative humidity: not more than 85%

• Driven Type: Electric
• Application: Industrial

The working of these meters is based on Faraday’s Second Law of Electromagnetic Induction. It states that, a conductor moving in a magnetic field with the direction of its motion perpendicular to the magnetic field generates an EMF across it and the direction of the EMF is perpendicular to both, the magnetic field and the direction of motion. The generated EMF is proportional to the magnetic flux density, B, the velocity of conductor v and the length of the conductor l. In the flow meter the magnetic field is generated by exciting the coils and the conductor is the liquid itself, under measurement with the length equal to the diameter of pipe.

• Voltage: 220/230 Volts
• Frequency: 50Hz-65Hz
• Display: 3 ½ Digit
• Resolution: pH =0.01 pH, MV =1 mv
• Accuracy: pH= 0.01 pH (Relative), MV= 0.1% +-1 Digit
• Range: pH =0 to 14 pH continuous, MV= 0 to +-999 mv
• Temp Compensation: 0-100 0C (Manual)

Supplied Complete with combined pH electrode with Gold plated BNC Connector, Two plastic bottles, Electrode stand and instruction manual.    Optional Accessories Automatic Temp. Compensation with PT-100 probe extra 8400.00 PH Electrode -14 PH 5600.00

Good accuracy also when confronted with unfavourable installation conditions.No point or single beam measurement = never a one point measurement can represent the total flow in a pipe.Excellent averaging of the flow profile allover the complete pipe section.The magnetic field is present throughout the flowmeter.

We are offering optical power meter come with features such as - runtime and average values of voltage (l-n and l-l) for each phase and average of these values. Runtime and average values of current for each phase and their sum. Neutral current, frequency for l1 phase.

• Blue: White

We offer Btu meter. Based on calculations of thermal power & energy consumed through measurement of flow, temperature difference of inlet & outlet of the medium. 4-20 mA output proportional to power output. 16x2 LCD, 9 digits for total energy & 5 digits for instantaneous power. The engineering unit can be selected as either KW & KWHr or BTU/Hr & BTU. Communication port RS 232/485 is available with MODBUS RTU. Backup of totaliser on power failure in non volatile memory. Logging history can be viewed on the screen. Ingress Protection: IP65 Equivalent

• Frequency: 50 Hz
• Usage/Application: Laboratory
• Phase: Single Phase
• Ip Rating: IP54
• Available Power Supply: 24 V DC/110 V AC/230 V AC
• Display: LCD

• Application: Industrial
• Brand Name: Sharang
• Voltage: 6-9 V DC
• Color: Black
• Model: ZE107
• Dimensions: 105 x 75 x 30 mm
• Indications: Audible Alarm for Fail Mode
• Weight: 75 gms

• Driven Type: Electric
• Feature: Easy to use ,High efficiency,Accurate result
• Brand Name: Scope
• Weight: Approx. 2.3 Kg (without accessories)
• Humidity: 95 % RH (without condensation)
• Dimension: 221 x 189 x 99 mm
• Storage Temperature: -25 C to 65 C
• Operation Temperature: -10 C to 50 C

The 3 Phase CT Operated Trivector Meter is designed for metering of HT/LT consumers and for feeders. The meter has advanced data and tamper recording capabilities and is provided with communication ports Features: Class 0.2s, 0.5s, 1.0 as per relevant IS and IEC Standards 1A and 5A current rating 3 Phase 4 Wire/3 Phase 3 Wire system Anti-tamper features Self-diagnostic capability Multiple tariff / Time of day feature Upto 3 Maximum Demand registers Load Survey (Interval Data) features Upto 12 reset backups Optical port/RS 232/RS485 (optional)

• Accuracy: Upto ±0.5%
• Size Range: 15 NB to 900 NB
• Temperature Range: Upto 100 Deg.C
• Case Protection: IP 65/IP 66/IP 67
• Materials: Stainless Steel
• Process Connection: Flanged as per ASME B16.5

This Data acquisition IOT system is new technology offer by JKS Techfor various industrial use to capture real time process parameters for process control. This system can give data of various process plant and testing machineries.  

• Conductivity: 14 selectable ranges
• Min. measurable conductivity: 50 µS/cm
• Max. measuring span: 1000 mS/cm
• Min. measuring span: 500 µS/cm
• Max. measuring error: ± 1.0 % FSR , 0 … 1 mS/cm to 0 … 500 mS/cm ± 1.5 % FSR , 0 … 1000 mS/cm ± 1.5 % FSR , 0 … 500 µS/cm
• Reference temperature: 25 °C , adjustable
• Repeatability: < 0.5 % FSR ,> 1 mS/cm
• Compensated temperature range: -20 … 150 °C
• Temperature compensation: 0.0 … 5.0 % FSR/K , adjustable
• Step response time: ≤ 2.0 s
• Sample time: ≤ 0.4 s
• Concentration: 4 factory set media
• Customer defined media: Customer defined (30 point lookup table)
• Temperature: Free programmable range
• Measuring range: -20 … 150 °C
• Thermal response time, T90: ≤ 15 s
• Max. measuring error: ± 0.4 K
• Process temperature: -20 … 140 °C , permanent 140 … 150 °C , max. t < 1 h
• Process pressure: ≤ 25 bar
• Connection variants: G 1 A hygienic
• Wetted parts material: PEEK Natura
• Surface roughness wetted parts: Ra ≤ 0.8 µm
• Properties: Universal commands Common-practice commands Conductivity device family commands Device Specific Commands For more information please see ‚HART Field Device Specification‘
• Protocol: HCF standard, Rev.7
• IO-Link version: 1.1
• Device profile: Smart Sensor Profile
• Baud rate: 38,4 kbaud (COM2)
• Cycle time: ≥ 8,4 ms
• Process data length: 128 bit
• SIO-mode: Yes
• Process data (cyclic): Switch state Signal analog output 1 Signal analog output 2 Temperature Unit temperature Conductivity Concentration Actual measuring range
• Degree of protection (EN 60529): IP 67 IP 69K , with appropriate cable
• EMC: EN 61326-1
• Hygiene: 3-A (74-07) EHEDG EL Class I FDA (21 CFR 177.2415)
• Safety: cULus listed, E491206

• Weight: 0.82 kg
• Accuracy: +/- 0.5 percent
• Repeatability: +/- 0.15 percent
• Display Type: Digital
• Usage/Application: Industrial
• Flow Range: 1.9 to 57 lpm
• Maximum Pressure: 34kPa,0.3 bar
• Flow Range: 1.9 to 57 lpm
• Maximum working pressure: 10.3 MPa, 103
• Minimum working pressure: 34kPa, 0.3 bar
• Operating temperature range: -20°C to 50°C
• Storage temperature range: -25°C to 50°C
• Wetted parts: Stainless steel, PBT (polybutylene terephthalate) nickel, nitrile rubber
• Batteries: 2 AA alkaline
• Expected battery life: 6 to 12 months

• Memory: 2 GB
• Warranty: 1 Year Against Manufacturing Defect
• No. of Channels: Multichannel
• Power Supply: SMPS 85-240 VAC
• Interface: PC / PENDRIVE
• Export of Data: PDF / EXCEL
• Accuracy (%): 0.25 %
• Sampling Time: 1 sec for 04 ch / 2 sec for 08 ch
• Panel cutout: 78[h] x 154[w] , depth : 144[d]

Manas make BTU meters comprises of accurately calibrated Electromagnetic Flowmeter, Pair of temperature sensors and Flow Transmitter with integral Energy computing capability unit to calculate Net Heat consumed. We offer our BTU Meters for wide range of applications. Example- In Air handling Units, chilled water, HVAC applications. It is used in centralized air conditioning systems for both commercial and industrial buildings. Similarly for Hot Water & Thermic fluid applications our Heat meter (HET100L) also perfomed well.

• Brand Name: SCOPE
• Dimension: 245 x 160 x 85 mm
• Instrument Weight: 2.5 kg
• Power Supply: 230 V AC
• Memory: 50 results
• Display: 4 line 20 character backlit LCD

• Brand Name: Multispan
• Power Source: 230VAC
• Country of Origin: Made in India
• Model Name/Number: AVF 19N
• Usage/Application: Industrial
• Dimension: 96 X 96
• Display: Digital
• Usage: Industrial
• Supply Type: Auxillary
• Number Of Wire: 3
• Condition: New

Combining the function of both, Hour meters and Counters, these highly reliable and compact devices manufactured by GIC measure time and keep count of a particular event or process with the highest level of accuracy. DIGITAL HOUR METER & COUNTER   Compact size with 7 digits,with 6.5mm height, backlit LCD Suitable for both Digital Hour Meter & Counter application Suitable for Panel Mount

• Feature: Motor Control Center Panels, Process Control, Energy Management System (EMS)
• Type: Digital
• Frequency: 50Hz +-5.0%
• Size: 96 x 96 x 110 mm
• Working Temperature: 0 to 55 Degree C
• Relative Humidity: 30-95% non-condensing
• Secondary Current: 1 or 5A (Site selectable)
• Power Consumption: Less than 3VA
• Power Supply: 90 - 270VAC, 50/60Hz or 1 1 0 - 3 7 0VDC

• Warranty: 6 Months
• Brand: Fluke
• Digit Display: 4 Digit
• Battery: 9 VOLT

• Frequency: 60 Hz
• Country of Origin: Made in India
• Brand Name: Microfix
• Usage/Application: Laboratory
• Display Type: Digital
• Body Material: Mild Steel

• Display Type: Digital
• Packaging Type: Box
• Voltage: 220 V
• Power Source: Electric
• Body material: Plastic
• Frequency: 50 - 60 Hz

digital multi meters, Stainless Steel Bolts, Stainless Steel Nut

Digital AC / DC Ammeter, flat panel monitors, Battery Testing Instrument