Electronic Test Instruments Dealers in Midc, Pune

• Display Type: LCD
• Brand: Graco
• Maximum Fluid Working Pressure: 345 Bar
• Storage Temperature: 70 DegreeC
• Storage Humidity: 95% RU
• Max. Operating Temperature: 60 Degree C
• Metering System: Oval Gears
• Display Digits: 4 Digits
• Power Supply: Standard alkaline batteries 2 x 1.5 Volt Size AA
• Battery Duration: 18 - 24 months
• Weight: 1 Kg

The Insulation tester \ MegOhmmeter HT7051 was designed to perform professional insulation resistance measurements with test voltage programmable up to 5kVDC and wide measurement range up to 10Tohm which permits a large applications for each industrial LV environment ( test on electrical machines, power transformers, electrical cables, switchboard panels, generic devices, etc…). Three different function modes are available on meter: FIX mode ( fixed test voltage ), ADJUST mode ( programmable test voltage ) and RAMP mode ( programmable test voltage and duration time with up to 3 kind of selectable ramps ) which permits to reach correct results in each situation. The Polarization Index ( P.I ) and Dielectric Absorption Ratio ( D.A.R ) available features are duration tests which permits to define a good behaviour of the global insulation. The Insulation tester \ MegOhmmeter HT7051 is powered by a NiMH rechargeable battery with integrated adapter which permits to reach great performances during the measurements, it have a internal memory for saving results and a RS-232 interface for connection to PC and transfer saved measurements. All structure is fitted in a portable hard carrying case which assure safety typical of a “on field” Insulation tester \ MegOhmmeterFunction •  Insulation resistance measurement with test voltage up to 5kVDC•  Measurement range up to 10Tohm•  FIX mode with test voltage of 100, 250, 500, 1k, 2.5k e 5kVDC•  ADJUST mode with test voltage selectable from 100 to 5kVDC•  RAMP mode with selectable duration time and test voltage•  Selection of 3 type of ramp test•  Polarization Index ( P.I. ) measurement•  Dielectric Absorption Ratio ( D.A.R ) measurement•  DC / AC TRMS voltage up to 600V•  SMOOTH feature for stable measurement results•  GUARD test lead for surface leakage current compensation•  MX, MIN limit selectable threshold on measurements•  Automatic discharging of device under test•  Fuse protection on power supply•  LCD display with backlight and bargraph•  Internal memory for saving results•  Recall saved results at display•  RS-232 interface for PC connection•  Rechargeable internal batteryAccessoriesStandard• KIT14000 : Set 3 cables with alligator clips + 2 cables• C7001 : Power cord• BORSA2000N : Carrying bag for accessories• TOPVIEW : Windows software + serial cable C232NG1• ISO9000 calibration certificate• User manual Optional• C2009 : RS-232/USB adapterStandards• EMC 2004/108/CE Directive • 16th edition • CE MARK • IEC/EN61187 • IEC/EN61557-1 • IEC/EN61557-2 • LVD 2006/95/CE Directive

• Application: Food and Beverage Industry
• Body Material: Plastic
• Usage: Laboratory

flow meter for water /alcohol/fermented wash/molasses.

We are the main supplier of this product.

• Type: Electronic Meters
• Certification: ISI Certified
• Application: Control Panels
• Color: Grey, White, Black
• Frequency: 45Hz
• Automatic Grade: Fully Automatic, Semi Automatic
• Power Source: Electric
• Warranty: 1year

Backed with rich experience, we have carved a niche for ourselves in the Indian and international markets as the Exporter and Supplier of the best grade of Industrial Meters. Procured from the reliable entities with consistently even track record, these reasonably-priced Meters are characterized by low wear and tear, appropriate functionality and high endurance properties. By choosing right shipment mode, we timely cater every consignment.

Backed by rich industry experience, we are presenting our clients a complete range of Digital Static Meter SCM-02. Our product range is designed for locating and measuring static charge potential on objects, people and equipments and is perfect for measuring electrostatic charges encountered in plastic, paper, packaging, textile, food, pharmaceutical, electronic items. 

• Type: Surface Resistivity Meter
• Condition: New
• Model: z205-100
• Brand Name: Sharang
• Display: Digital
• Usage: Laboratory
• Weight: 200 g

Surface Resistivity Meter offered to comprise battery operated meters that provide functioning as the portable instrument for measuring the surface resistivity of flat surfaces. These find use in the circuit industry for checking products like component storage bags, workbench surfaces, conveyor belts and others which come with resistance values and require meeting stringent specifications.

• Mounting Type: Top / Side
• Indicator System: Bi-colour Roller/Follower Capsule
• Housing for Indicator: Bi-colour Roller –SS Housing Follower Capsule – Glass Tube in Aluminium / SS Housing
• MOC of Indicator: SS 304
• Float Chamber: 50NB Non Magnetic Standard pipe
• MOC of Float Chamber: SS 304, SS 316, SS 316L, PP, PVDF, Others on request
• Scale: Aluminium / SS / Acrylic engraved in mm
• Process Connection: Flanged in various Sizes
• Vent: 1/2 INCH Plugged / 1/2 INCH Ball Valve
• Drain: 1/2 INCH Plugged / 1/2 INCH Ball Valve

• Type: Ph Meter
• Certification: ISO 9001:2008
• Weight: 100-200gm, 200-300gm
• Color: Brown, Grey, Maroon, White
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Automatic Grade: Automatic, Fully Automatic, Manual
• Body Material: Plastic
• Power Source: Battery
• Feature: Accuracy, Durable, Light Weight, Lorawan Compatible, Low Power Comsumption, Multi Jet, Stable Performance

• Warranty: 12 months
• Measurement Range: 10
• Measurement accuracy: half decade
• Resolution: One decade.
• Excitation voltage: 9 V
• Indication: Visual by LEDs
• Test actuation: Press to ON Switch.
• Power supply: 9 Volt DC battery
• Low battery: Warning at 7.5 V
• Dimensions in mm: 125 x 75 x 29
• Weight: 150 GMS
• Calibration: Recommended every 12 months
• Traceability: To national standards
• Accessories included: 1 m Grounding Cord & Carrying case

17 FUNCTIONS 23 RANGESModel – KM 351BALANCE LOAD 1/3 PHASE TRMS POWER CLAMP-ON METER WITH PC INTERFACE Transient Protection 6.5kV (1.2/50mS surge) ACCESSORIES :Test leads (pair), Battery installed, User's Manual, Carrying Case. OPTIONAL ACCESSORIES :PC interface Kit, (including BUA-2303 USB-to-Serial adaptor, BA-1XX optical adapter black, BC-100R cable & Bs Software CD) Ultra-Slim jaw to access tight places.• 600A AC Clamp-on + Multimeter ranges• 600V AC/DC input protection on all functions• AC True RMS Voltage and Current functions.• Balanced-Load 1-phase / 3-phase Power W, VA & VAR measurements.• Dual display Power Factor (PF) & A-Lags-V Phase-Shift indication TM• AutoVA (Auto Selection on ACV, DCV or ACA functions)• Power measurement of Selectable W, VAR & VA with dual-display Total Power Factor features..• Display PEAK-rms HOLD & Data Hold function.• Fast Peak-rms Hold (65ms to 90%) for In-rush ACA & ACV readings.• Measure line-level ACV Frequency via test leads• Measure non-invasive ACA frequency via clamp jaws.• Battery Cover with probe holders.• Fast Audible Continuity.• PC-Comm computer interface capabilities (Optional). [/wptab] [wptab name=’Specifications-KM 351′] • Sensing : True RMS sensing• Jaw opening & Conductor diameter : 26mm max• Display : Voltage Function : 6000 counts LCD display Power, Ohm & Hz functions : 9999 counts LCD display ACA clamp-on function : 4000 counts LCD display• Update Rate : Power function : 1 per second nominal Voltage, ACA clamp-on, Ohm, & Hz functions : 4 per second nominal• Polarity : Automatic• Altitude : Operating below 2000m• Low Battery : Below approx 2.4V• APO Timing : Idle for 17 minutes• APO Consumption : 10mA typical• Operating Temperature : 0 °C to 40 °C• Relative Humidity : Maximum relative humidity 80% for temperature upto 31oC decreasing linearly to 50% relative humidity at 40oC• Storage Temperature : -20 °C to 60 °C, < 80% R.H. (With battery removed)• Temperature Coefficient : nominal 0.15 x (specified accuracy) / 0C @ (0°C-18°C or 28°C-40°C), or otherwise specified.• Power supply : Standard 1.5V AAA Battery x 2.• Power Consumption : Voltage, ACA, Hz & Power functions : 10mA typical Ohm function : 4mA typical• Dimension : 189(L) x 78(W) x 40(H) mm• Weight : Approx. 192 gms [/wptab] [wptab name=’Safety-KM 351′] • Meets IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed., CAN/CSA C22.2 No. 61010.1-0.92, IEC61010-2-032, EN61010-2-032, UL61010B-2-032 & CAN/CSA C22.2 No. 61010-2-032-04: Measurement Category : III 600 Volts AC & DC.• Pollution degree : 2• E. M. C. : Meets EN61326-1:2006 (EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11)In an RF field of 3V/m : Total Accuracy = Specified Accuracy + 45 digits Performance above 3V/m is not specified• Overload Protections : ACA Clamp-on jaws : AC 600A rms continuous + & COM terminals(all functions) : 600VDC/VAC rms• Rugged Fire-retarded casing.• LVD EN61010-1 & EN61010-2-032 CAT III 600V

PH Meter/ Conductivity Meter are reliable and accurate test instruments for measurement of Conductivity of aqueous solutions.These instruments are ideal for monitoring salt contents in water and soluble salts in soils. They are extremely useful instruments for agriculture and soil analysis labs, swimming pools, fertilizer plants, petroleum refineries, textile plants etc.    Features:    Reliable and easy to operate Cell constant adjustment facility ATC facility (S-942) High durability and longevity Properly tested

• Display Type: LCD Digital
• Brand Name: CURTIS 
• Voltage: 12-24V DC
• Features: High Strength frame to protect the operator , to protect the operator and goods 
• Usage/Application: Industrial
• Model: 840R

• Brand Name: Meco
• Warranty: 1 Year
• Application: Industrial
• Model: 2520THz-Auto
• AC Current (Ampere): 1000A
• DC Voltage (Volt): 1000 V
• AC Voltage (Volt): 750 V
• Jaw Open (mm): 52 mm
• Data Hold: Yes
• Minimum Order Quantity: 1 Number

In the course of operation, keeping track of trap performance and repairingreplacing leaking or waterlogged trap becomes unfeasible due to the large number of traps installed.

Features : • Ruggedised, compact, state-of-the-art design ideal for On Line & Off Line data Acquisition• Field selectable inputs from Thermocouples, RTDs, Current & Voltage• Field settable scaling, tag name & Engg.unit for each channel• No.of Channels 4, 8, 12 & 16• RS-232 / RS-485 / RS-422 communication with Modbus RTU protocol• Parallel port for DOT matrix printer• Common & individual Alarm relay for high & low limits• With CFR 21 Part II compliant software

Gas flowmeter for measurement of gas flow in industrial applications.high pressure or low pressure,high flow or low flow,high and low temperature all line size.

• Application: Industrial
• Features: Fine polish, Optimum quality, High tensile strength
• Measuring Range: 325 mm
• Battery: Around 30 Hours using Battery

The apparatus consists of a copper sphere in which a mica heater is fitted. This small sphere is surrounded by another copper sphere and the insulating powder to be tested is filled in between these two spheres. The heat produced by heater is radially flows outwards in all directions through insulating powder. A digital temperature indicator is used to measure temperatures of Inner & Outer sphere. An ammeter & voltmeter is provided to measure heater input. By knowing heat input and temperatures, thermal conductivity of powder can be calculated. The unit is provided with asbestos powder, however any other powder can be tested with this unit. Specifications: Inner sphere - copper - 100 mm. dia. Outer sphere - copper - 200 mm dia. Heater – Mica heater placed in inner sphere. Thermocouples on outer surface of inner sphere and inner surface of outer sphere. Instrumentation & Controls : Digital Voltmeter - 0 - 199.9 Volts. Digital Ammeter - 0 - 1.999 Amp. Multy channel Digital Temperature Indicator. Heater Control. Service Required : 230 V.A.C. stabilised supply with earthing. Floor space - 1.5m X 1.5 m at working height.  

• AC Voltage: 50V,100V,250V,500V,1000V
• DC Voltage Accuracy: 50V,100V,250V,500V,1000V
• Minimum Order Quantity: 2 Number

watthour meters, Temperature Instrument, LED Street Light

PH TDS Conductivity Meter, Manual Blood Pressure Apparatus, surgical iv set

Flow Meter

Energy Meters, Power Supply Unit Circuit Breakers

gas system

Introduction To Energy Management System, Electrical Plug And Socket

Marshall B Series Industrial Boilers, Boiler Accessories