Electronic Test Instruments Dealers in Pune

• Body Material: Aluminum, Plastic
• Power Source: Electric
• Application: Energy Monitoring
• Certification: CE Certified
• Voltage: 220 V
• Frequency: 50Hz-65Hz
• Country of Origin: India

• Body Material: Plastic, Stainless Steel
• Color: Available in Many Colors
• Power Source: Battery
• Application: Industrial
• Size: Standard
• Certification: CE Certified
• Display Type: Digital
• Frequency: 50Hz-65Hz
• Warranty: 1 Year
• Country of Origin: India

• Driven Type: Battery
• Condition: New
• Power Source: Battery
• Application: Winding Testing
• Feature: Accuracy, Easy To Use
• Type: Contact Resistance Meter
• Temperature: High Temperature, Low Temperature, Medium Temperature

• Country of Origin: India
• Frequency: 50 Hz
• Phase: Single Phase
• Accuracy: +/- 1%
• Voltage: 220 V
• Power Consumption: 50 W

• Material: Stainless Steel
• Operating Temperature: 70 Deg C
• Accuracy: 0.5 %
• Country of Origin: India
• Pressure: 15 bar
• Line Size: 15 mm to 3000 mm
• Display Type: Digital
• Flow Range: 0-10000 m3/hr

• Line Size: DN 10 to DN 500
• Pressure: Up to DN80 – PN 40   From DN100 to DN200 – PN 16 From DN250 to DN500 – PN10
• Accuracy: ±1% of Actual Flow Rate between 100% to 10% of calibrated range
• Media Temperature: Hard Rubber (HR) -0-90 Deg C   PTFE – 0 – 150 Deg C PFA: 0 to 200 Deg C
• Ambient: 0 to 50 Deg C
• Pipe Material: SS304 (nonmagnetic)
• Liner Material: Hard Rubber/PTEF/PFA
• Coil Housing Material: MS/CS PU Painted/SS304/SS316
• Flanges Material: MS/CS/SS316/SS304/SS316 L
• Min Media conductivity: 20 micro-Siemens per cm
• Type of Transmitter: SS1021
• Shelf Life: 5 Years
• Local Display: 2-line LCD Display For instantaneous Flow rate, Totalizer, Engg. units, Fault Message, etc
• Output: Pulsed DC output/4-20 mA (Optional)/Rs485 Communication (Optional)
• GSM Facility: Optionally Available
• Flow Velocity: 0.2m/s to 12m/s
• Ingress Protection: IP68 for Primary Flow Sensor, IP67 for flow Transmitter

• Power Source: Electric
• Automation Grade: Automatic
• Application: Industrial
• Certification: CE Certified
• Display Type: Digital
• Warranty: 1 Year
• Country of Origin: India

• Application: Industrial
• Display Type: Analogue, Digital
• Frequency: 50Hz, 60Hz
• Driven Type: Electric
• Warranty: 1year
• Pack Type: Carton Box

WBTMS integrates online temperature measurement, data collection, data analysis and control function   WBTMS consists of : Sensors ( Wireless Temperature transmitters – BBS350) Receiver (Wireless Signal Receiving & Monitoring Unit – BBC969) Software (Processing, Alarming & Reporting Software – AmpSCADA ** **Optional   Bus Bar Sensors : Digital Sensors Measures temperature in wide range : -40 deg C to 125 deg C Transmission Interval : Every 30 sec to 300 sec Transmission Range : Upto 15-20 mtrs (Can be increased upto 4 kms with additional hardware)   Receiver : Receiver BBC969 is installed in the control panel One unit monitors 9 sensors Alarm Mode : Buzzer, Relay for Hooter & Relay for CB Depending on number of sensors, a series of BBC969 controller can connect in daisy chain on Modbus   Software (Optional) :  Processes the sensors’s information from Modbus Records in textual log file Display Alerts, Trend Charts & generate customize reports Admin User can set ALerts or generate reports   Application Area : Input & Output bus bar of Switchgear Circuit breaker contact Bearing & Winding of the motor High temperature air outlets Power distribution Transformers   Solutions : Monitoring of Transformer Oil level, Oil Temperature & Bus Bar Temperature : Monitoring of LV Panel Bus Bar Temperature in 12 Substations remotely connected over Wireless Communication

• Type: Conductivity Meter
• Automatic Grade: Automatic
• Accuracy: 0.5 Percent
• Display Type: LCD
• Brand Name: Fischer
• Conductivity: 0.5 to 65 MS/m or 1 to 112% IACS
• Usage/Application: Industrial

• Brand Name: DBK Instruments
• Display: Digital 12 mm Red LED
• Range: 199.9 PPM
• Dimension: 110 Wx 50 Hx 120mm D. (1 kg.)
• Cutout: 102 x 60rnrn H

• Country of Origin: India
• Type: Data Loggers
• Application: Logging, Monitoring
• Feature: Accuracy
• Automation Grade: Automatic
• Brand Name: Keller

Data Logger RFID (Series 21 DC RFID)  Saves up to 8000 pressure-and temperature values. Integrated long-life battery for autonomous data logging.  Total Error Band ± 0,5 %FS @ 0...50 °C. Passive RFID interface 13,56 MHz / ISO 14443. Integrated low-power I2C pressure transmitter also available as OEM 

We are offering digital torque meter, digital torque wrench torque meter, which are used in different industries and are available in varied models. These products are having different qualities and are available in different versions. Range of our digital torque wrenches includes 2 – 800 nm.

• Brand Name: ELECTRONET
• Driven Type: Electric
• Color: Blue
• Condition: New
• Automatic Grade: Automatic
• Certification: CE Certified, ISO 9001:2008
• Voltage: 220V
• Operating Temperature: 0 To 80°C
• Warranty: 2years
• Conductivity: 0 To 99.99 µS/cm For Cell Constant 0.01
• Country of Origin: India

• Material: Metal
• Color: Blue
• Feature: Accuracy
• Type: Interface Unit Data Logger
• Warranty: 1Year
• Country of Origin: India
• Size in mm: 200 X 170 X 78 (H)

It can be connected to FERROLAB & MODEL 570 T to store the information like CE, C, Si, TP, TL, TS, TF, Date, Time and Heat No. After selecting full print mode, it can store 400 readings for FERROLAB and 800 readings for Model 570 T. It has a centronic output and it is connectable to a parallel printer.

• Country of Origin: India
• Light Source: Led Life Long Light Source
• Tests: Haemoglobin & Glucose
• Methods: Drabkins, A.h.d. (alkaline Hematine Detergent, Non Toxic), Glucose By End Point
• Reagent Volume: 0.250ml in Semi Micro Cuvette, 0.500ml in Micro Square Cuvette 1ml in Round Glass Cuvette
• Calibration: Auto Calibration with Measured Blood Hb Value as Standard or Artificial Standard ( Glucose)
• Display: Lcd with Blue White Backlight, Alphanumeric
• Keyboard: 16 Keys,0-9nos, with Haemoglobin / Glucose (hb), Calibration (cal), Absorbace(abs), Ent Key
• Power: 5a, 3 Pic, 230v and Battery Box with 8 a Battery

For Direct Hb & Glucose Results.   Methods: Drabkins or A.H.D , End Point by Standard   With Test ( Hb / Glu), Calibration and Absorbance modes. Auto calculation of Calibration Factor Numeric Entry of Known Hb standard or Glucose Standard for Calibration mode.

• Country of Origin: India
• Certification: CE Certified
• Color: Black
• Voltage: 110V
• Condition: New
• Display Type: Analogue

PM Series Node- LCD for Diagnostics900 MHz, IP67 /NEMA 6Inputs:Four selectable NPN/PNP discreteTwo 0-20 mAOutputs: Four PNP discrete; Two 0-20 mA

• Ambient Temperature: 0 ° C + 60 " C
• Switching Unit: Micro controller Based.
• Housing: DIN RAlL,suitable for back panel mounting
• Mains Voltage: 65-265 V AC, 50HZ/18-36 V DC
• Output: 1 sets of potential free c/o contacts rated at 5 amps for each set point.
• Power consumption: 2.5 VA
• Safety operation: Field selected switch over for minimum or maximum (FSL/FSH) switching points.
• Switch status display: LED L1 to L4 for four points of level Alarm and L5 for power ON/ timer.

SALIENT FEATURES : No moving part, free from maintenance. No special cable required for signal transmission, ECONOMICAL to install. Long cable connection permissible between probe and evaluation unit. Low Pulse voltage  on probes for prevention of electrolytics deterioration of electrodes. Low voltage on probe for operational safety. Two point action for automatic pump control. Two point independent switching. Three point switching , two points with pump control logic and one independent point. Four point switching having two-pump control logic. Variety of probes available for various process condition.   Multichannel ~4 point independent switching available for various process condition. MEASURING SYSTEM : A low Pulse voltage is applied between the probe electrode and the tank wall (or reference electrode in case of insulated tank). When the liquid comes in contact with the electrode tip, a conductive path is established between the sense electrode and the tank wall / reference electrode. This current is sensed, amplified and made to operate a relay whose contact in turn can be used for annunciation/control. APPLICATION : JAYCEEAQUA 4000 level switches are used in processing plants for conductive liquids of conductivity  as low as 1 micro siemens in Food, Power, Chemicals, Sugar, Detergents, Steel, Minerals, Textiles, WTP and ETP etc. For conductive Liquids and Low-conductive Liquids such as DM-Water. Suitable for liquid having conductivity as low as l micro Siemens. Usage: Switching 'OFF' pumps when tank is full, to avoid overflow For maintaining a constant level to avoid material wastage For switching ‘OFF’ pumps before running dry and indicating an empty tank to avoid wear and tear & production stoppage SENSING PROBE : Mounting : Screwed - 1/2" BSP [standard] Above 1/2" BSP and flanged mounting (As per application and requirement) Sensing Probe : Stainless steel 304/ 316 rod / rope type Insulation :PTFE (standard) Other insulation on request and as per application. Operating temperature : 200oC max. (Inside vessel]

This method of test is intended to differentiate, in a preliminary way, among the similar materials with respect to their action of high voltage, low current arc, close to the surface of insulation, intending to form a conducting path therein causing the material to become conducting decomposition and erosion. In order to distinguish more easily among materials which by this test, have low arc resistance, the early stages of the test are mild and latter stages are successively more severe. The arc occurs intermittently between two electrodes resting on the surface of the specimen in regular orientation: the severity is increased in early stages by successively decreasing to zero the interval between flashes of uniform duration and the latter stages by increasing the arc current.

• Automation Grade: Automatic
• Application: Automobile
• Feature: Accuracy, Low Power Comsumption
• Display Type: Digital
• Country of Origin: India
• Portable: Yes

• Display Type: Digital
• Power Source: Battery 9V X 1EA
• Application: Laboratory
• Warranty: 1 Year
• Dimensions: 136(L) X 69(W) X 32(H)
• Condition: New

Digital Automatic heamoglobin meter is designed for quick and accurate detection of Blood Hb.   Note :- We have different Diameters / Capacity as well in the product

• Color: Black
• Condition: New
• Application: Industrial Use
• Type: Conductivity Sensor
• Warranty: 1year
• Country of Origin: India
• Brand Name: Brio Instruments
• Technical Specification:: O-Rings
• Silicon: Insulator material
• Expoxy resin, PTFE: Electrodes
• 316 Stainless Steel or Titanium: Pressure Rating:
• Std. Polypro fitting:: 6.9 bar (100 psi) @ 100°C (212°F)
• Opt. 316 SS fitting: 13.8 bar (200 psi) @ 120°C (248°F)
• Sanitary Connection: 6.9 bar (100 psi) @ 120°C (248°F)
• Cable Length: 3 meter (std.)
• Sensor weight: 600 gm (approx.)
• Conductivity range:: For 0.01 Cell:
• 0.055 - 100 µS/Cm: For 0.10 Cell:
• 1- 1000µS/Cm: For 1.00 Cell:

• Frequency: 50 Hz
• Brand Name: Maco
• Voltage: 750V AC
• Current Rating: 70A
• Usages: Used for measuring voltage and current
• ACC Cl: 0.5
• Size: 72X72,96x96,48x96
• Model: SMP72