Elemental Analyzer Dealers in Pune

• Accuracy: +-0.1 %
• Size: 27 mm x 21 mm
• Resolution: 0.1 pH
• pH Value: 0.00 to 14.00 pH
• Temperature: -5 to 90 Deg C

MicroSet Instrumentation & Controls reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements.  

• Accuracy: 0.01 PH ± 1 Digit
• Input Impedance: 1012Ohms
• Temperature Control: 0 to 100°c Manual

table top ph meter ms ph 616 it is a high-precision ph meter for continuous 0-14 ph reading & milivolts. The ph meter is easy to operate as it has the least number of controls. Check facility saves time from every day buffer standardization and hence is most suitable for quick analysis. It is a very sleek attractive finished instrument. specification     ph mode mv mode range : 0.00 to 14.00 ph 0 to ±1999 mv resolution : 0.01 ph ± 1 mv accuracy : 0.01 ph ± 1 digit 1 mv ± 1 digit input impedance : 1012ohms   temperature control : 0 to 100°c manual   display : 3.5 digit led display with auto polarity & decimal   calibration : two buffers calibration (manually) 7ph & 4ph or 9.2ph   power requirement : 230v a.c ± 10%, 50hz single phase   environment : 5 to 50°c   dimensions : 205 x 65 x 130mm ( aluminum powder coated cabinet )   weight : 1.5kgs (approx) including accessories

• Many variants available• With easy to change sensors in case of service• With calibration mode for easy on site calibration

• FEATURES: Very accurate , fast , process using latest microprocessor. Analysis within 2 to 3 minutes.

This is a Microprocessor based Digital System for Automatic Thermal Analysis & Temperature Measurement of Molten Iron. It enables in determination of % Carbon Equivalent, % Carbon and % Silicon of unalloyed cast iron.

• Voltage: 220/230 Volts
• Frequency: 50Hz-65Hz
• Display: 3 ½ Digit
• Resolution: pH =0.01 pH, MV =1 mv
• Accuracy: pH= 0.01 pH (Relative), MV= 0.1% +-1 Digit
• Range: pH =0 to 14 pH continuous, MV= 0 to +-999 mv
• Temp Compensation: 0-100 0C (Manual)

Supplied Complete with combined pH electrode with Gold plated BNC Connector, Two plastic bottles, Electrode stand and instruction manual.    Optional Accessories Automatic Temp. Compensation with PT-100 probe extra 8400.00 PH Electrode -14 PH 5600.00

• Accuracy: +- 2%
• Model Name/Number: PO-650 ORP
• Brand: Aster
• Physical Dimensions: 105 x 105 x 130 mm
• Cut Out For Panel: 92 x 92 mm
• Enclosure Type: Weather Proof IP 65
• Input Supply: 230 V AC 10 %,110 V AC Or 24 V DC
• Frequency: 50 Hz
• Display Type: LED
• Temperature: 0- 60 Degree C
• Features: Individual set point based relay operation. Sensor provided with proper housing & tee ensuring rigid handling of the sensor. Alarm acknowledgement facility.

• Power: 230 V
• Brand Name: DMS
• Response time: 0.33 sec

Ranked amidst the celebrated Suppliers of PH Transmitter, we are customers' reliable choice in the industry. To handle both automated inbound and outbound orders, we have exceptional warehousing solutions. We keep the wide array of products sorted in the warehouse to make sure that the delivery commences systematically. Approx Price : Rs 8,500 / Piece

• Application: Laboratory
• Range: 0-14pH
• Resolution: 0.01digit
• Accuracy: 0.1pH +/- 1 digit Of reading
• Input Impedance: 1012 Ohms
• Dual Display: Upper For pH (Red LED) & Lower for Temp. (Green LED)
• Temp. Compensation: 0-150c Manual Or Auto ( PT-100)( Optional )
• Calibration: 3 point Auto Calibration 7.0, 4.0 & 9.2
• Error Indication: Out Off Buffers Range. (B) Slope Error
• Control Setting: Two Set Point ( High & Low)
• Output: 4-20mA D.C ( Optional )
• Controlling Output: One Changeover Relay of Potential Free Contacts Of 5Amp
• Environment: 5 to 50c.
• Supply: 220v A.C +/- 10%, 50Hzs A.C
• Size: 96 x 96 x 110 mm ( Gray Color ABS Plastic Housing, Panel Mount )

Features : It is a quality test equipment for cement industry. It is used to determine the percentage of free lime in cement or clinker sample. It is an automatic system based on advanced technology of conductivity principle. It gives accurate results in very less time as compared to traditional method. It requires very little quantity of ethylene glycol per cycle which results in effective saving of ethylene glycol. Direct display of result is available. Manual errors & fatigue are fully eliminated. It operates through advance electronic control system. Easy to operate & almost maintenance free.

• Size: 600*600*400
• Type: A
• Model Number: 001
• Brand Name: Eet
• Material: Ms
• Weight: 8kg
• Color: Wight
• Warranty: 1 year

Good 

• Feature: Accuracy and Reliability
• Brand Name: N. P. Electronics
• Condition: Good
• Country of Origin: Pune,Maharasthra
• Product Name: Gas Analyzer
• Variety: Gas analyzer 8050, exhaust gas analyzer 8020, portable gas analyzer etc.

We manufacture various types of Gas Analyzer which includes gas analyzer 8050, exhaust gas analyzer 8020, portable gas analyzer etc. Our gas analyzers are equipped with various superior features, thus increasing the accuracy and reliability of the analyzer. The gas analyzers which we manufacture are provided with an automatic warm-up facility and also with a back up battery. We provide gas analyzers at the most reasonable rates.

We are offering power quality analyzer voltage and current thd, current tdd and k-factor, up to 50th order harmonic, true rms measurement with 128 samplescycle, en50160 compliance statistics, harmonic survey statistics, ieee519 & ieee 1159 measurement compliance, iec 61000 flicker, cbemaitic, iec 6100-4-7 harmonics, tou energy measurement, standard rs-485 communication port and an additional plug-in rs-232rs-422rs-485, ethernet, profibus, gprs module, true rms volts, amps, power, power factor, neutral current, frequency, two independent, simultaneous waveform recorders with upto 2000 post fault cycles 5060400 hz measurement capabilities, class 0.2s iec 62053-22 four-quadrant active and reactive energy meter, three-phase total and per phase energy measurements; active, reactive and apparent energy counters, real-time waveform monitoring capability, add on tou, rtc, dido modules.

• temperatures: 80°C

Suitable for process temperatures up to 80°C and samples with just 2 uScm conductivity.A proprietary electrolyte provides more consistent readings in low ionic content samples than conventional sensors.3 ceramic diaphragms for flow independent signals.

• Brand Name: LT Gasetechnik
• Minimum Order Quantity: 1 Piece

Our advanced packaging system assists us in meeting the bulk and customized packaging requirements of the clients. In addition, our packing experts ensure safe packaging of the products. Our team makes it possible to carry out online transactions, keeping the details confidential. Our payment procedures and the transactions we make are completely transparent and thus, clients can trust on us.

• Measuring Range: 0-14 pH (4-20mA)
• Output:  4-20mA (scalable to 0-14 pH),500 Ω at 24 V DC
• Operating Temperature: -25 to 70 Degrees C
• Accuracy: ±.02pH (±2mV)
• Input:  pH electrode with BNC connector, Solution ground
• Power Requirement: 12-24 V DC
• Temperature Compensation: Automatic
• Repeatability: ±.01 pH (±1mV)
• Linearity: 0.1% of Span

The P-420 (encapsulated PH Transmitter) is a 2-wire, 4-20 mA PH transmitter having encapsulated construction, High performance and compact size. It can be interfaced with any display and control devices requiring a 4-20 mA input.Transmitter accepts input from any PH combination electrode through BNC Connector. It transforms the PH signal to a 4-20 mA Current proportional to the PH level 4-20 Output from PH transmitter can be transmitted over two wires to control device. Same two wires used to suppy power to loop.Any 12-24 VDC Power supply can be used. There are two adjustments on transmitter to standardize probes for "ASY" and "SLP".Features:• 4-20 mA Loop Powered•  Easy To Use• Compact Size• Adjustable ASY and SLP

• Type: Hplc System
• Certification: CE Certified
• Display Type: Digital
• Driven Type: Electric
• Pressure Range: 40-80 Mpa
• Temperature: 5-85 Degree C
• Automation Grade: Automatic
• Application: Laboratory Use

Knauer GmbH make HPLC SYSTEM

• Brand Name: EET
• Color: White
• Application: ETP stp
• Feature: Weather Proof
• Packaging Type: Paper Packet

Cod Bod pH tss 

• Power: 9VDC
• Usage/Application: Laboratory
• PH Range: 0.00 to 14.00 PH
• Features: Low Cost Plus High Performance - offers laboratory-quality readings for a very economical cost, Mult

• Country of Origin: India
• Type: Power Analyzer
• Weight: 0-1Kg
• Voltage: 220V
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Brand Name: Treffer

• Features: High power LED Volume or light sheet Synchronization PIVTecILA software Easy setup Background illumination ILA.PIV.Nano Camera Also suited for MicroPIV Etc
• Specifications: Pulses 0...200A Power 0...47mW/ cm2 Colours green, blue, red, white, UV Length 120mm (without op

Particle Image Velocimetry is a non-intrusive laser optical technique used for determination of the velocity distribution in fluids. The complexity of a system can strongly vary depending on the type of application, however the basic principle of PIV stays the same. For the purpose of PIV, the fluid is seeded with light scattering particles, which are believed to follow the flow dynamics. The flow is illuminated by a concentrated light source, normally a laser, where as a special camera is acquiring the reflected light from tiny particles in the flow. The camera takes two consecutive images which are synchronized with the two light pulses. The light pulse is very short such that single particles can be identified in the images without blurring effects. The cross correlation software then calculates the displacement of the particles between the first and second image. Since the time between the two light pulses is known, the velocity field can be calculated.

Quantum magnetic resonance analyzer It contains quantum analyzer and Low frequency physiotherapy functions, and Low frequency physiotherapy functions contains the slipper and paster functions( Also known as TENS Therapy ). So it contains Quantum analyzer, Slipper functions, Paster functions.