EOT Crane Dealers in Khed, Pune

Appreciated for Various Speeds, the double Girder Goliath Cranes that We Offer Has the Capacity to Bear Heavy Loads as and When Required. We Receive Repeated Enquiries from the Clients for the Double Girder Goliath Cranes that We Bring Forth. Also, We are One of the Well-established Manufacturers of Double Girder Goliath Cranes. demanded for : maintenance Hangerswater Houseslarge Water Worksrailway Yardsfactoriespower Stationsharbors

Gantry / Goliath Cranes are adapted to applications where overhead runways would be very long, costly to erect, and difficult to maintain in alignment. Where the installation is only temporary, a gantry crane can be moved to a new location with less trouble or expenses than an overhead crane and its runway. Also it is comparatively easy and inexpensive to extend the length of the runway and thus increase the working area of the crane. Most gantry crane installations are outdoors. The initial cost of a gantry crane, which may be double that of an overhead crane, must be equated against the additional cost of an overhead runway. Goliath / Gantry Cranes are self-propelled cranes running on rails installed at ground level. Applictions of these type of cranes are - Construction sites Stockyards, Ports and harbors Marble and granite industry Workshops where existing columns cannot bear the wheel loads of a single or double girder bridged crane Workshops that might restrict the height of lift of a regular bridge crane Locations where bay lengths are excessive Locations where bay lengths do not remain constant Sites / projects where the crane itself needs to be relocated from one place to another  Locations where loads are to be shifted from points outside the crane span as in the case of an overhang on either side of the rails      

Shri Sai Cranes are offering a quality assured assortment of Goliath Cranes. Offered products are widely used for material handling and are highly appreciated among our clients for their sturdy construction. These are widely used in many applications such as ports, stockyards and scrapyards, construction sites and railway yards.

Goliath Crane is self-propelled crane running on rails installed at ground level. Goliath Crane can be installed for various applications such as grabbing in steel plants, manufacturing units, and stockyards. Goliath Crane can be moved to a new location with less trouble or expenses than an overhead crane and its runway. Also, Goliath Crane is comparatively easy and inexpensive to extend the length of the runway and thus increase the working area of the crane. In workshop where part utilization of shop bay is required a semi gantry and goliath crane are used. The Goliath Crane manufactured by us is available in single-girder as well as double-girder types. The range of Goliath Crane available with us allows quick assembly and easy relocation. Goliath Crane is adapted to applications where overhead runways would be very long, costly to erect, and difficult to maintain in alignment. In such a configuration, one end carriage of the crane will travel on the regular gantry rail while the opposite end-carriage will travel on a rail mounted typically on the ground or at a lower elevation. If required, Mechtrotech can advise end users on the type of crane to be installed based on a cost-benefit analysis.

Eot Crane Amc, eot crane maintenance, EOT Crane Service

RSK CRANES Single Girder EOT Cranes designed as per customer requirements and specifications up to 15 MT (standard). Single Girder EOT Cranes are fabricated by using optimum quality raw material and components like MS sheets, MS angles, I- Beam, Motors, Gear Box, Wire-ropes, DC-Brakes etc. We used SEWNORDSMGM Varvel motors with inbuilt Hardened & Ground Gear Box, Electromagnetic DC disk Braking System.

• Safe Working Load (SWL):: 1 ton to 15 tons
• Spans In Meters:: 1 m to as per customer requirements
• Heights of Lift (HOL):: As per customer requirements
• Hoisting Speed:: MH - 4.0 m/min microwith VFD / customized as per client's requirement
• Power:: AC 3 phase / 415 V / 50Hz

Using the modular technology Crystal has developed wide range of Single Girder EOT Cranes & Hoists, Modular technology enables compact & light design with different customized solutions which can be accommodated in very small space & which gives maximum approaches to increase the carne working area. Use of VFD gives smooth & hassle free operations along with the maximum safety. Heavy duty Limit switches in all motions takes care of your product & crane safety. These cranes are highly demented in Paper Industries, Automobile & Electrical Industriesand Iron& Steel Industries etc. You can avail these crane form us as per given technical specifications TECHNICAL SPECIFICATIONS : Safe Working Load (SWL): 1 ton to 15 tonsSpans In Meters: 1 m to as per customer requirementsHeights of Lift (HOL): As per customer requirementsHoisting Speed: MH - 4.0 m/min microwith VFD / customized as per client's requirementPower: AC 3 phase / 415 V / 50Hz

We are offering goliath cranes are used to work in open area like road sides, shipping yards, construction industry and many other applications. Further, goliath cranes can be fitted with walkways & assembly platforms and are suitable for maintaining workshop fittings.

dg-eot crane

Gantry cranes are same as the regular overhead cranes except that the bridge for carrying the trolley is rigidly supported on two or more legs running on fixed rails or other runway.   These “legs” eliminate supporting runway and columns and connect end trucks which run on a rail, either embedded in or laid on top of the floor.

• Span: 3 Mtr. to 40 Mtr.
• Capacity: 2 Tons onwards
• Lift: 3 Mtr. to 20 Mtr.

Magnet Eot Crane, Goliath Eot Cranes, Steel Mill Eot Cranes

single beam eot crane, Single Girder Crane, Crane Crab Trolley

Single Girder Semi Goliath Crane, Double Girder Goliath Cranes

Single Girder Goliath Cranes for Shipping Industry

Geared Motors

Industrial Crane