Epoxy Primers Dealers in Dehu, Pune

• Application: Car Paint
• Color: White
• State: Liquid
• Brand Name: Plasma
• Color: Red
• Country of Origin: Made in India
• Packaging Size: 5 lit
• Coverage Area: 8-9 sq. mt / lit
• Primer Base Type: Epoxy
• Form: Solvent
• Finish: Matt
• Solid Content: 52- 55%
• Density: 1.40 kg/ lit
• Drying Time: 10 mins surface dry, Hard Dry : 24 hrs.
• Coats Required: 01
• Is It Anti Corrosive: Anti Corrosive

• Brand Name: PPCOAT PRIMER
• Application: INDUSTRIAL / FABRICATION USE
• Application: SPRAY / BRUSH
• Model Number: EPOXY BASE PRIMER

We are offering Epoxy Grey Primer. Description: a two component epoxy polyamide pigmented with durable pigments giving a matt finish. scope: a two pack epoxy high build coating with superb performance in severe marine & industrial environment. The product has excellent resistance to chemicals, solvents, fumes, splash & spillage. Can be used in various industries including refineries, fertilizers & other chemical plants. Drying time: surface temp touch dry hard dry overcoating interval minimum maximum pot life 15c 2 hours 12 hours 24 hours 10 days 12 hours 25c 50-55 min 6 hours 16 hours 6 days 6 hours 35c 30 min 4 hours 8 hours 4 days 4 hours specific gravity: 1.28 volume solids: 50 thinner clean up: pragati make epoxy thinner flash point: 30c pack size: 51020 liters application: stir base thoroughly & then mix 4 parts of base & 1 part of catalyst by volume to uniform consistency. Allow the mixture to mature for 30 minutes & stir again before application & during use. Brush roller: add up to 5% thinner if required during application. Conventional spray: add up to 15% thinner depending on conditions. Use only standard equipment at an atomizing pressure of 3.5-4.9 kgcm2. Airless spray: apply preferably without thinning. However up to 5% thinner may be added if absolutely essential depending on conditions. Use any standard equipment having pump ratio 30:1. Tip size 0.38-0.43mm.tip pressure 110-160 kgcm2 . Surface preparation: remove grease, oil & other contaminants preferably by using degreasing solvent. Blast clean to a minimum of sa2 ½ swedish std sis 05 5900. For severe corrosion, blast to sa 3 with a surface profile not exceeding 65 microns. The surface should be clean & dry before application of primer coat. Storage: up to 6 month in intact condition or sealed the containers are kept under cover in a dry place under normal temp.conditions.

We offer a wide range of two pack epoxy primers, a preparatory material, which is coated on the surface that is to be painted. These primers are used for pre-coating of various materials like wood, metal etc.

Epoxy Primer Zinc Phosphate Primers, Paint Cleaning Thinner

Epoxy Red oxide Zinc Phosphate primer, Industrial Epoxy Zinc Chromate Primer

steel surface epoxy primers, synthetic paints, Polyurethane Paints