Falling Film Evaporator Dealers in Pune

We are offering falling film evaporators. we are engaged in providing the falling film evaporators to our valuable clients. We manufacture these falling film evaporators as per high industrial standards. Our falling film evaporators are tested on various parameters thus assure flawless functioning. Our falling film evaporators can work even at low temperature differences between heating media and boiling liquid. used to concentrate solutions, especially with heat sensitive components features in falling film evaporators the liquid product usually enters the evaporator at the head of the evaporatorthe product and the vapor both flow downwards in a parallel flowthis gravity-induced downward movement is increasingly augmented by the co-current vapor flowthe separation of the concentrated product from its vapor is undergoing in the lower part of the heat exchanger and the separatorthe product is evenly distributed into the heating tubesa thin film enters the heating tube and it flows downwards at boiling temperature and is partially evaporatedin most cases steam is used for heating the evaporatorthe falling film evaporators must be designed very carefully for each operating condition; sufficient wetting (product film thickness) of the heating surface by liquid is extremely important for trouble-free operation of the plantif the heating surfaces are not wetted sufficiently, dry patches and incrustations will occur; at worst, the heating tubes will be completely cloggedin critical cases the wetting rate can be increased by extending or dividing the evaporator effects, keeping the advantages of single pass (no recirculation of product) operationarea : 0.1 m2 to 30 m2

• Material: Stainless Steel
• Voltage: 380V
• Automatic Grade: Semi Automatic
• Phase: Tripple Phase
• Brand Name: CentPro
• Capacity: 10 to 100 m3/hr
• Steel Grade: SS304
• Air Pressure: 0.6 MPa

Features Suppressed boiling stops evaporation in tubes Reduces Scaling and fouling due to safer side design

• Material: Stainless Steel, Mild Steel
• Application: Process Effluents,RO Reject,Pharma,Dyes,Tannery,Textile,Distillery Etc.
• Capacity: 120 M3/hr
• Country of Origin: Made in India
• Automatic Grade: Automatic
• Brand Name: Pleiad
• Working Mode: Steam / Thermic Fluid / Electric
• Power: 10 HP

• Capacity: 500LPH, 1000LPH, 1500LPH, 2000LPH, 3000LPH, 5000LPH
• Material: Stainless Steel
• Automation Grade: Automatic
• Usage/Application: Industrial

A Falling Film Evaporator is a vertical shell and tube heat exchanger with a vapor- liquid separator mounted at the bottom. The liquid to be concentrated is fed at the top of the heated tubes and distributed in such a way that it flows down on the inside surface of the tubes as a thin film, under the influence of gravity. As the film gets heated, the vapors generated flow co-currently. The drag of vapors increases the turbulence and improves heat transfer performance. The balance liquid and vapor are separated in the vapor- liquid separator. Features Efficient Drying with high moisture contents High temperature drying. Handled wide range of size material

• Feature: Heat transfer is adjustable according to the requirement, Continuous feed material and discharge material, Highly suitable for food concentration with inner film evaporation and preserve maximum food
• Automatic Grade: Semi-Automatic
• Power Source: Electric

We offer Falling Film Evaporator. These are a variant of vertical Shell-and-tube heat exchanger with laterally or concentrically arranged centrifugal separator. Fenix FFEs are most efficient because evaporation is gentle, mostly under vacuum, and residence time in the evaporator is extremely short. The energy efficiency is also very high due to multiple e.ffect type of heating arrangement. Heating is done by thermal or mechanical vapour recompression method depending on the lowest theoretical temperature difference.. Process control and automation incorporated are simple: Due to their small liquid content, FFEs react quickly to changes in energy supply, vacuum, feed quantities, concentrations etc. Salient Features: • Capacity range: Up to 150 tph • Low floor space requirement • Suitable for temperature sensitive systems • High energy efficiency • Simple process control Other Information Pay Mode Terms: L/C (Letter of Credit) Minimum Order Quantity: One Piece Port of Dispatch: Mumbai Production Capacity: 300 Delivery Time: 10 weeks Packaging Details: Standard Warranty : Process performance is guaranteed by us for 6 months post-commissioning

Falling film evaporator that are highly durable in nature and facilitate flawless performance. These evaporators are used to evaporate the unwanted volume of water or any other kind of solvent substance from solid substances. Owing to their excellent quality and other top of the line features, these products are in wide demand and are getting excellent appreciation among our clients. In order to ensure their quality, these are manufactured at our highly developed infrastructure using superior quality input. These evaporators are ideal for low temperature applications and for high thermal efficiency.

In falling film evaporators the liquid product usually enters the evaporator at the head of the evaporator. The product is evenly distributed into the heating tubes. A thin film enters the heating tube and it flows downwards at boiling temperature and is partially evaporated. In most cases steam is used for heating the evaporator. The product and the vapor both flow downwards in a parallel flow. This gravity-induced downward movement is increasingly augmented by the co-current vapor flow. The separation of the concentrated product from its vapor is undergoing in the lower part of the heat exchanger and the separator.Falling film evaporators can be operated with very low temperature differences between the heating media and the boiling liquid, and they also have very short product contact times, typically just a few seconds per pass. These characteristics make the falling film evaporator particularly suitable for heat-sensitive products, and it is today the most frequently used type of evaporator.

• Type: Falling Film Evaporator
• Material: Aluminum, Stainless Steel, Titanium
• Application: Chemical Industry, Food Industry, Pharmaceutical Industry, Water Treatment Industry
• Color: Black, Blue, Green, Red, Silver
• Voltage: 110V, 220V, 380V, 440V, 580V
• Condition: New, Used
• Finishing: Non Polished, Polished
• Automatic Grade: Fully Automatic, Semi Automatic
• Feature: Easy To Use, High Grade Material, High Working Efficiency, Longer Service Life, Low Maintenance
• Phase: Double Phase, Single Phase, Tripple Phase
• Steam Pressure: 0.5Mpa, 0.6Mpa, 0.7Mpa, 0.8Mpa
• Evaporation Capacity: 0-1000lts/h, 1000-2000lts/h, 10000-11000lts/h, 11000-12000lts/h, 12000-13000lts/h, 13000-14000lts/h, 14000-15000lts/h, 15000-16000lts/h

thin film evaporator

Falling Film Evaporators, Saddle Packing Rings, multiple effect evaporators

Grasshopper Conveyor, semi kestner evaporator, Tubular Juice Heater

Falling Film Evaporators, Industrial Heat Exchangers