Filter Assembly Dealers in Bhosari, Pune

• Type: Inline
• Material: Stainless Steel
• Max. Operating Pressure:: 0.8 Mpa
• Inlet/Outlet Diameter: 38 mm
• Design Temperature: 20
• Aqueous Flow rates: Up to 4500 GPM

We manufacture all types of In Line Filter Housings for efficient filtration of Oil, Water, compressed gas and air at high pressure and temperature. Our In Line Filter Housings efficiently operates at pressure range from 100 kg/cm to 300 kg/cm. With the use of advanced technology, we offer simple, duplex and in-line Housings. Our In Line Filter Housings find wide applications in different industries. Specifications : Temperature up to 150 deg C Seals : Buna N, Nitrile, Viton Low Initial Pressure Drop Can be designed for high flows up to 30,000 cfm Applications : Pressure Line Filters Suction Staniners Filler Breathers   Simplex, Duplex And In Line Filter HousingsSatkirti Maufactures all types of simplex, Duplex and in line housings reuired for filtration of oil, water, compressed gases and air with high temperature and pressure. Pressure up to 300 kg / cm2 possibe, Standard housings up to 100 kg/cm2 Temperature up to 150 C. Seals - Buna N, Nitrile, Viton Low intial presure Drop Can be designed for high flows up to  10,000  lpm Applications -  pressure  line filters, suction strainers, filter Breathers This Three stage Filtration system was designed for N.T.P.C (kota) for removal of dust & moisture and odour from air.  Filtration - 10 micron Bronze, 0.01 micron Borosilicate Glass Fibre paper & Activated Carbon for Odour removal.Op. Pressure: 1.6 bar.This Filter is designed and manufactured for Gas Turbinr Research Establishment (GTRE), Bangalore Air Flow - 2 Kg/ Sec, Op. Pressure - 40 Kg / cm2 Op. Temperature: 650 deg C, MOC - S.S. 304 O.D. ; 324 mm, Length of vessel - 1.9m Flange Class - 1500 Forged, Flange O.D. - 675 mm, 125 mm thk This filter was tested at 170 bar pressure for 30 min. Filtration - 10 micron sintered S.S. Non -Woven Wire mesh 316L.

We are involved in offering an extensive range of Stainless Steel Filter Bag Cage. These cages are widely used in the major air pollution control systems. Manufactured using the controlled welding machines, these cages are assured of the topmost quality. Provided with galvanized electroplating, the range of filter bag cages offered by us is highly resistant to corrosion.

Flow Rate 5m3/hr to 50m3/hr  

• Brand Name: Honeywell
• Model Number: VMF
• Ambient Temperature: -4 Degree F to 140 Degree F (-20 Degree C to 60 Degree C).
• Inlet Pressure: 7psi (500mbar), CSA 5psi (350mbar)
• Fuels: natural gas, LPG (gaseous), bio methane (Less Than 0.1% H2S), air
• Differential Gas Pressure Range: 0.24-19.7"w.c. (0.6- 50mbar)
• Air Impulse Pressure Range: 0.24-40"w.c. (0.5-100mbar)
• Non Operation Inlet Pressure: 10psi (700mbar)
• Input Power: 24V DC, 100, 120, 200, 230V AC
• Enclosure: IP 65
• Cycle Rate: Greater Than 5, 000

We have parted our infrastructure into several units and one of them is warehouse wherein we keep a huge stock for furnishing urgent and quick requirements of the clients. Our organization has observed impressive rise as Fan Filter Unit supplier, courtesy our ability to fulfill to wholesale demands without hassle.

• Type: Industrial Filters
• Color: White
• Condition: New
• Usage: Liquid Filter,Air Filter,Dust Filter
• Bag Type: Pocket Filter
• Pattern: Plain

Micron : 1, 5, 10, 25, 50, 75, 100 umThe BP series bags are made of nonwoven needle felt with glazed finish PP. This finish is created by melting of the outermost surface fibers producing a bond which reduces the possibility fo migration. The PP molded top and the ends are ultrasonically welded together.The RSB series of bags are made of three layers of media. The inner layer works as a pre-filter which is made of coarse Nylon mesh, the center layer is non-woven felt which does the actual filtration and the outermost layer is made with super fine spun bond fabric for final filtration. The unique Rubber collar ensures O bypass & 100% seal and very accurate filtration.Configuration : BP : Dia 4" x 10" & 20" RSB : Dia 7" x 17" & 32" Flow per 10": 100 LPM for 10" BP series and 200 LPM for 17" of RSB for raw water with operating pressure of 2.5 bars.

B series (Air tech type) are judiciously manufactured by SAMSON by the professionals to filter and regulate the pressures and compression in industries to avaoin any industrial hazards.

• Features: Fine finish Minimal maintenance Hassle free operation

Owing to our expertise and immense knowledge in the field, we are instrumental in offering a comprehensive array Fan Filter Unit. The offered product is mainly used for protection against contamination introduced from various sources, such as personnel, general work area, manufacturing, etc. This product is extensively demanded in the industrial sector, commercial sector and residential sector. These filter units are designed using best raw material and contemporary technology under the vigilance of adroit professions. Moreover, our customers can avail this at reasonable prices.

Filter Cart Mobile Extraction / Filter Units   FilterCart W3 The FilterCart W3 mobile filter unit for extraction applications in light production facilities is very advanced, with every conceivable function. This includes a warning signal when the filter is full. The W3 model meets the legal requirements for W3 in BGIA. The specially designed metal hood with integrated spotlight provides maximum air speed at the weld point.

Fan Filter Unit(FFU) is air cleaning equipment to supply purified air to the clean room for manufacturing electronics components, food products, pharmaceuticals , health care or any precision engineering products .The installation space is the system ceiling grid. For a large clean room, a large number of FFU are required depending upon class of cleanliness.  FEATURES Modular Design to change layouts Low Height & Weight. Air Tight Performance Low Noise & Vibration Ductable Design Cost optimization HEPA and ULPA filters (Mostly minipleat) Choose either a HEPA Filter 99.99% eff. @ 0.3 micron or ULPA Filter 99.9995% eff. @ 0.12 Micron filters Various optional accessories like prefilter Diffusion plate,pressure gauge Group control management system Fixed speed or variable speed control Horizontal flow table unit CONSTRUCTION: Envair Fan Filter Units are self-contained, motorized Supply Air Modules equipped with either HEPA or ULPA filters. Envair FFU's can be used in either horizontal or vertical flow positions, wherever clean air is needed.They are designed for easy connection to the building power & Air Handelling system and are equipped with a pre-filter, four clips located at all corners for providing strong suspension points.Housings are fabricated from 18-gauge steel with a white powder coat finish or thermoformed plastic or GI or aluminum or stainless steel. Envair FFU are Tested as per Std. ISO �?14644 & US FED STD.209

Shri Enterprises is involved in providing an optimum quality range of PP Filter Unit.    

Avail from us Bag Cages that find application in the bag filter. The Bag Cages are placed in the bag which prevents the bags from collapsing because of the negative pressure in bag filter. We produce Bag Cages for approximately all types of Dust Collectors ranging from 6 to 24 vertical wires. The Bag Cages can be availed in different sizes from us. We are a well-recognized Bag Cages Manufacturer, Exporter and Supplier in Maharashtra, India. The Materials Used For Manufacturing Bag Cages Galvanized cagesCarbon steel with platingSS 304, SS 316, SS 316LEpoxy coated cages The Different Passivation Process That We Do for MS Plated Cages Green PassivationBlue PassivationYellow Passivation

Sintered Bronze filter elements are made from spherical bronze powder. These are available in cylindrical shapes. These can be manufactured in various diameter and length. These cylindrical tubes can be joined to each other by welding or using resin & hardener. Brass or stainless steel caps cab be fixed to these elements by using resin and hardener. Sintered bronze filter elements are available from 1 micron to 100 micron filtration level capacity. These elements used for filtration of Air and gasses at high pressure and temperature.Sintered bronze filter element gives uniform pore size distribution. These filter elements are cleanable and reusable resulting in reduced operation costs.

• FEATURES: Modular Design to change layouts Low Height & Weight. Air Tight Performance Low Noise & Vibration

Fan Filter Unit(FFU) is air cleaning equipment to supply purified air to the clean room for manufacturing electronics components, food products, pharmaceuticals , health care or any precision engineering products .The installation space is the system ceiling grid. For a large clean room, a large number of FFU are required depending upon class of cleanliness.

• Voltage: 220V
• Frequency: 50Hz, 60Hz
• Automatic Grade: Automatic
• Power: 3-6kw
• Driven Type: Electric
• Efficiency: 99.99%
• Units are available in two types: Horizontal flow , Vertical flow

Features : Pharmaceuticals and chemical research laboratories. Excellent cost / performance ratio. Wide variety of sizes and configurations to satisfy nearly any requirement Minipleat HEPA filters of efficiency 99.999% for supply. Close pleated pre-filters for suction 95% for suction. Can be modularly supplemented. User-friendly handling. Magnehelic gauge for pressure differential. Fluorescent light. UV light along with hour meter. Acrylic/ Polycarbonate side panels. Fine finish Minimal maintenance Hassle free operation Applications : Assembly and cleaning tasks in industry and research, Laboratories, universities, pathology departments, authorities. Pharmaceuticals and chemical research laboratories University clinics Electronic industry Optical industry Semiconductor production System engineering Aerospace Nuclear industry Food processing industry.

• Type: Housing Covers
• Material: Plastic
• Application: Automotive Industry,Industrial
• Color: blue
• Feature: Durable,High Durability,Simple Installation,
• Condition: New
• Finishing: Polished
• Packaging Type: Box
• Country of Origin: India

·         Can Be Used In Any Commercial Ro, 100 Lph To 2000 Lph System.   ·         Jumbo filter for home / commercial ro water purifier, removes sand / silt / sediment particles upto 5 micron size.   ·         Connect in home piping with any 1/2 / 1 / 1.5 / 2 inch piping using reducer.

We are leading manufactures of Bag Supporting Cages which are designed specifically for utilizing fabric filter bags with internal support system that holds the filter bag open through out the particulate collection cycle. Our company has established itself as one of the ace Bag Support Cages Manufacturer. We offer bag supporting cages in various configurations like MS, GI, SS304, SS316 & SS316L with 8, 10, 12, 16 & 20 vertical wires along with horizontal ring spacing made by 3 mm, 4 mm and 5 mm wire diameter to meet various requirements of the clients. Cages of these Filter Bag Supporting Cages offered by us are strong enough to withstand the pressure exerted during the cycle from filter bag.

Membrane Filter Holder Assembly, vacuum blood collection tubes

• Capacity: Up to 2000 m3 / hr

PFP designed and manufactured Bag Filter Housings and vessels in accordance with Pharmaceutical GMP requirement and Fabrication Standards. All Designs are customized to meet user requirement. Features and MOC Used for High Viscosity liquid Filtration Designed for large volume operation - High Flow rate Economical and easy to Handle Filter bags of PP / Nylon and other fabrics can be used High Dirt Holding Capacity Multi Bag Design Customized size and design as per requirement Material of Construction Housing is designed and fabricated in SS or MS or other metal as desired. They are available in PP and FRP also Bag Filter Housing assembly consist of - Housing + Inner Cage + Filter bag + Sealing arrangement for bag to stay in place at high pressure. Solids are collected in filter bags which can be easily cleaned and replaced Suitable to be used with Filter bags with PP Collar or SS Ring Filter housing are designed as per ASTME Standard Application Paints Chemicals Water Coolants Resins Pharmaceuticals Sugar syrup Polymers Oil etc Sizes Bag filter system suitable for Ø 4" x 10" Long Filter Bag Ø 4" x 16" Long Filter Bag Ø 7" x 16" Long Filter Bag Ø 7" x 32" Long Filter Bag The above sizes can be designed for multiple bag Filter also up to 16 or more

filter components, Automobile Filters, Press Tools, mould

frp air filters housing, Frp Products, FRP Tank Lining, frp dash boards

(DUMMY CONTENT)  An oil skimmer is a machine that separates a liquid from particles floating on it or from another liquid  hese technologies are commonly used for oil spill remediation but are also commonly found in industrial applications such as removing oil from machine tool coolant and removing oil from aqueous parts washers.  The working principle is based on a linear movement of parts through the process; parts are conveyed through the different stages of the process at controlled and changeable speed. Parts can be moved in continuous or indexed for precision cleaning of holes and recesses. Conveyors can be designed in many ways with steel belt, chain and rod type to carry parts or baskets and with necessary parts holding fixtures. Dedicated pneumatically operated reciprocating pressurized spray manifolds with wrapping effect for precision cleaning to attain cleanliness values and to suit parts and the process requirement. Drying systems using air knife with low compressed air consumption or regenerative blowers at an elevated temperatures for water dry off effect. Suitable for manufacturing, automobile and aeronautical industries.

• Color: Blue/Red/Green
• Brand Name: Blue Magic
• Inlet/ Outlet: 2
• Flow Capacity: 10/20//30/40/50 m3/hr

We offer our clients a comprehensive range of screen filters designed as per international quality parameters our screen filters are made up of high quality carbon steel pipes with 7 tank process powder coating. The filters elements are made from 10kg x 110mm pvc pipes of reputed brands. It is fitted with ss 304316 wire mesh of 100120150 mesh with fiber mesh inside as per customers requirement. Pressure gauge sockets of 14” for checking pressure is provided at inlet outlet, available in threaded connection b. S. P., and flanged end connections can be provided as per customer requirement, as well as color options as per customer’s requirement in both metal & plastic. it is available in the sizes of 1020304050 m3hr

• Type: Filter Housings
• Material: ABS Plastic, Aluminum, Stainless Steel
• Application: Water Filteration
• Color: Creamy, Off White, White
• Condition: New
• Finishing: Non Polished, Polished
• Pressure: High Pressure, Low Pressure, Medium Pressure

Fan Filter Unit, air showers filters, Fume Hoods, laboratory workstation