Flow Control Valves Dealers in Pune

• Material: Metal, Stainless Steel
• Number Of Way: 2way
• Application: Water Fitting
• Pattern: Plain
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Investment Casting, Non Breakable

Designs available in 5 LPM @0.5bar pressure, 10LPM and 15LPM. Made from SS Extrusions (Machined) and not from castings, hence reducing the chances of manufacturing defects like blow holes and shrinkage. Can be manufactured from SS 316/55 304/55 202 based on project technical specification CNC machined for better dirnensional accuracy resulting in precise output flow Fully automatic working, hence no manual flow adjustment required. Output flow has a saturation knit; hence water loss due to installation of suction pumps is prevented. Single body design prevents unnecessary fiddling and reduces water losses as in case of conventional brass ferrule. In built NRV (Non return valve) hence only unidirectional flow allowed. FCV is designed to withstand high line pressures. Zero maintenance. Factory calibrated design hence, once installed immediately ready to use. FCRI Tested for output flow calibration for given line pressure. 

• Brand Name: Gvision
• Valve Size: 2 inch to 12 inch
• Material: Stainless Steel
• Media: Water, Fuel, chemicals
• Automatic Grade: automatic
• Type: Flow Control Valve
• Model Number: GV-FCV 101
• Operating Height (Feet): 10 ft, 15 ft, 20 ft, 25 ft
• Temperature (Degree Celsius): range 50 to 800 deg.c.
• Application: for automatic liquid flow controlling
• Material Grade: ss 304 , 308 , 316
• Voltage: 230V AC Supply
• Condition: New

The flow control valve by SAMSON are highly preferred by clients as they are require low maintenance and are quite cost effective.  

  The Axial Flow Control Valve is design for special applications requiring high flow capacity, the precise control from a linear motion closure member, and reduced turbulence and vibrational effects. An ideal application is centrifugal compressors, as commonly used in gas transmission compressor stations, petro-chemical installations, which display a potentially destructive phenomenon called ãsurgeà. Surge is a reversal of high velocity flow that can have catastrophic consequences to the compressor. To protect the compressor, the anti-surge valve control valve must open very fast and eject the surge. These valves have to be fast acting but also have high capacity and anti-noise designs Due to the high capacity of the axial flow valve, several stages can be used in order to reduce the noise level of these applications. The crank-lever system design of the Axial Flow Control Valve, transform a small torque into a big thrust, allowing the valve to require smaller actuator sized, which in consequence increases precision and speed of control. These control valves can be equipped with SAMSON GROUP actuators and valve accessories such as positioners, limit switches, and solenoid valves.   FEATURES & BENEFITS Smooth and precise control that is friction free, backlash free, and unaffected by dirt Environmentally safe with zero emissions due to rotating shaft Drive mechanismås multiplier effect gives maximum thrust when it is required SPECIFICATIONS Size:4" to 24" ANSI Class:150 to 900 Std. Materials:Carbon Steel, Stainless Steel Temperature Range: -58 to 482℉(-50 to 250℃) .  

We are Manufacturer, Supplier and Exporter of Iris Flow Control Valve. It is manufactured from unmatched quality raw materials and following world class standard. Our valued customers can get it delivered at their doorsteps at their ease and comfort. Demand of our product is increasing day by day owing to its precise processing, high effectiveness and immaculate quality. We offer this safely packed product at affordable rate. Additional Information:To improve the capacity of continuous centrifugal machine, it requires automation of massecuite feed and water wash. The IRIS flow control valve (centrally opening as camera aperture) can easily control the massecuite feed. The automatic massecuite feeding system controls loading of the centrifugal (motor load) by adjusting the opening of IRIS Valve. The IRIS Valve provided (of size DN 125 to DN 200) is operated by an electro pneumatic actuator. For a high control precision, the pneumatic actuator is designed for a high number of operations. To control the desired quantity of water wash needle valves are to be adjusted manually. Advantages: Optimized sugar yield, wash water and steam quantity are set to optimum performance, the quantity of massecuite is corrected Due to IRIS Valve massecuite flow is concentric and finely controlled. Optimized centrifugal throughput (higher than 10% to 20% of manual control) Gentle centrifugal operation for a longer service life No overflow of massecuite in motor trip condition as valves closes automatically in motor off/ trip condition Reduced dilution of molasses and direct sugar losses Saves electricity and steam Very user friendly and robust design Easy to install and commission Can be retrofitted easily with the existing panel

• Model No: DV-08 DRV-08
• DV-10 DRV-10: DV-12 DRV-12
• DV-16 DRV-16: DV-20 DRV-20
• TCM 06: TCM 10
• Connection  BSP (F): 1/4"
• 3/8": 1/2"
• 3/4": 1"
• -: -
• Max Flow (Ipm): 10
• 20: 40
• 70: 120
• 30: 60

Flow control valve manufacturers High Precision CNC Machined 

Ideal for streamlined piping layout. Allows free flow in one direction and controlled flow in the other so as to regulate the speed of the cylinder. Option of Knob type and Recess type design. Better control of air flow achieved by giving fine threads on regulating pin.

2 stage digital control valve for precise delivery of set quantity. These valves are used for batching applications. A wide range of material of construction is available as per customers applications demand.

• Material: Stainless Steel
• Media: Gas, Fuel, Air, Water
• Packaging Type: Box
• Brand: Hydrocap
• Finishing: Polished
• Application: Industrial
• Maximum Pressure: 350 bar
• Max Flow: 30 L/min
• Port Size: 1/2 Inch, 1/4 Inch
• Cracking Pressure: 0.5 bar

• Brand Name: REXROTH
• Media: HYDRAULIC OIL
• Applications: Low maintenance,Compact design,Easy to install,Durable
• Type: Flow Control Valve
• Model Number: Z2FS6, 2FRM
• Pressure: Low Pressure, Medium Pressure, High Pressure
• Power: Hydraulic
• Product Type: FLOW CONTROL VALVE
• Throttle Type: YES
• Pressure (Bar): 350
• Condition: New
• Place Of Origin: INDIA
• Item Code: Z2FS6, 2FRM
• Maximum Working Pressue: 350 BAR
• Minimum Order Quantity: 1 Number

Automatic Filtration System, multiline automatic lubricant system

• Valve Size: 1 inch to 4 Inch (25mm to 100 mm)
• Material: Stainless Steel
• Connection Type: SMS Unions
• Media: Milk & Beverage
• Type: Flow Control Valve
• Power: Manual
• Material Grade: AISI 304,AISI 316 & AISI 316l
• Application: Industrial
• Maximum Tested Pressure: 10 Bar
• Maximum Temp: 95°C.
• Minumum Temp:  -20°C

Swivel Flow Control Valves, Aluminium & Aluminium Products, rubber molded

Pneumatic Flow Control Valves, Pneumatics Check Valves, Hydraulic Regulators

air pressure control, WIKA Pressure Gauges, Temperature Dry Well Calibrators

Camozzi Pneumatic Flow Control Valve, Pneumatic Tee

Inline Flow Control Valves, mixing valve

Flow Control Valve, Power Pack, Vane Pump, Piston Pump

High Pressure Inline Flow Control Valves, Vehicle Hydraulic Cylinder

1 / 4 Inch BSP Flow Control Valve, hydraulic solenoid valve coil

Inline Flow Control Valve, Vehicle Hydraulic Cylinder

Check Valves

Temperature Control Valve, precision control valve, automatic control valves