Flow Meter Dealers in Bhosari, Pune

MANAS has introduced a new economical series of Electromagnetic flow meter., considering water as the most important utility in any industry. To know your water consumption not Just by assumption but by correct instrumentation. JAL-OAGH provides the solution. It is the most suitable full bore electromagnetic flow meters for water and waste water treatment plants.  JAL-OAGH 100, 300 SERIES OF EMF These flow meters are dedicated for waste water management system, sewage & effluent water measurement. These flow meters are mainly categorized into two i.e. Threaded & Wafer type. Threaded is available from DN 25 to DN 65 i.e. Jal-oagh 100 Series while Wafer is available from DN 50 to DN 200 i.e. Jal-oagh 300 Series   Principal advantages of JAL-OAGH : • Small in size, Light in weight compared to other magnetic meters in its class• Full bore electromagnetic flow meter with absolutely no restriction to flow• Has a typical accuracy of ±0.5%.• Measurement is independent of the velocity profile across the pipe• Measurement results are independent of density, viscosity, pressure, temperature, solid impurities and conductivity variations (above 5µ S/cm for MFT-01& above 20 µS/cm for (SMART JAL-OAGH)• Fits in between the flanges of the pipe which makes it the most compact solution for flow measurement.• Compatible virtually with all corrosive and non-corrosive liquids.• It is a very cost-effective and economical flow meter as compared to other flow meters in its class.      JAL-OAGH APPLICATION : • Effluent Treatment : Untreated as well as Treated Effluent Water Measurement.• Sewage Treatment : Waste water measurement, Sludge measurement etc.• Water Supply Schemes : Raw water as well as treated water measurement.• Boiler Feed Water Measurement.• Chemical Industries : Measurement of acidic & alkaline chemicals & slurries.

• Size: 1 inch to 10 inch
• Accuracy: ±2.5% to 3% of actual reading
• Size :: 1” to 10”
• Type of flow element :: Differential flow element.
• MOC of flow element :: SS 316
• End Connection :: SORF flange
• MOC of flanges :: M.S/C.S/S.S
• Orifice Flange assembly :: WNRF Class 300
• Accuracy :: ±2.5% to 3% of actual reading
• Gas Temperature :: Up to 70°C
• Power Supply :: 85 to 265 VAC @ 50Hz
• Type of flow element: Differential flow element
• Typical turndown: 10
• Density compensation: Online monitoring and compensation of density
• Communication protocol: MODBUS, RTU
• Communication port: RS485, RS232 (optional)

• Input : 0-10 VDC / 4-20 mA / pulses
• Output : 4-20 mA to 0-10 VDC Optional ( isolated )
• Indication: 4, 5, 6 digit LED Display for flow rate 6 digit for totalisation
• Power Supply: 230 / 110 VAC , 24 VDC
• Accuracy : Better than + 2% Of F.S.
• Alarm: 2 Nos.
• Batch: 2 Nos. ( optional )
• Interface: RS 485 / MODBUS RTU / ASCII
• Mounting : Panel / field

• Weight: 4.6 kg
• Material: SS
• Repeatability: +/- 0.05 %

• Size: Multisizes
• Type: Water Flow Meter
• Material: Aluminum
• Color: Available in Many Colors
• Feature: Accuracy
• Voltage: 110V
• Application: Industrial, Residential
• Operating Temperature: 10-50D/C

The company is located in Pune(India) and caters to the diverse requirements of the buyers. Delivering the orders on time is one of our specialties for which we are highly admired by the clients.

• Features: Suitable for both Saturated & Superheated Steam

These units are designed to measure the mass flow rates of saturated and superheated steams. The unit displays instantaneous mass flow rate and totalized mass of steam.Unit offers facilities for accurate flow totalizing in both compensated as well as uncompensated mode.

• Blue: White

These meters are based on the principal of differential pressure generated by Orifice element. Designed as per ISO5167/BS1042. On line density compensation delivers very accurate results. Various Types of IBR/Non IBR valves for isolation and drain. Various Sizes of Orifice Assemblies with or without IBR Certificate. Complete System is Engineered to suite your requirements. Highly Reliable and Repeatable System; No Moving Parts. Easy for Calibration.

• Weight: 0.82 kg
• Accuracy: +/- 0.5 percent
• Repeatability: +/- 0.15 percent
• Display Type: Digital
• Usage/Application: Industrial
• Flow Range: 1.9 to 57 lpm
• Maximum Pressure: 34kPa,0.3 bar
• Flow Range: 1.9 to 57 lpm
• Maximum working pressure: 10.3 MPa, 103
• Minimum working pressure: 34kPa, 0.3 bar
• Operating temperature range: -20°C to 50°C
• Storage temperature range: -25°C to 50°C
• Wetted parts: Stainless steel, PBT (polybutylene terephthalate) nickel, nitrile rubber
• Batteries: 2 AA alkaline
• Expected battery life: 6 to 12 months

We are offering turbine flow meter. Protocontrol take this opportunity to introduce ourselves as representative of one of the largest global manufacturer of process control instrumentation products. gems sensor & control, designs and manufactures a broad portfolio of liquid level flow switches, pressure switches, miniature solenoid valves, and pre-assembled fluidic systems. gems sensors & controls has manufacturing facilities in usa, uk, and china. rotorflow® flow sensors 1. Provide visual indication, continuous sensing and accurate switching 2. Bright, visual indication with choice of pulsed dc output, or adjustable 1 amp switched output. 3. Flow ranges from .1 gpm to 60.0 gpm 4. Compact inline housings available in high performance plastic, brass or stainless steel housings. The rf-2500 series flow switch, has been totally re-engineered with a one piece composite rotor, stronger unibody construction, ceramic shaft and better sealing. the results are greater durability with broader chemical, temperature and pressure capabilities. switch types for specific flow setpoint switching, rotorflow® rfs type flow stitchesare one of the most reliable flow switches available. setpoints are fully adjustable over the specified flow range. the dynamic operation of the rotor guards against jamming and false actuation. output types for flow rate monitoring or metering applications. rotorflow® rfo type flow sensors provide a pulsed dc voltage output that is proportional to the rate of flow. the operating range of 4.5 to 24 vdc pulsed output is easily integrated into most digital logic units. rfa type rotorflow® sensors provide a continuous 0-10 vdc analog output.

We are one of the leading names engaged in offering Pelton Wheel Flow Indicators. These FI-PW series Wheel Flow Indicators offered by us are of MTD make and are also known as visual flow indicators. Simple in construction, the Wheel Flow Indicators range is suitable for transparent liquids and non hazardous gases. Widely used to prove flow of coolant, lubricants and fuel lines, the Wheel Flow Indicators are also used in turbines, engines, compressors, and other large machinery. These indicators are suitable for monitoring filter efficiency, pump operation, and flow direction.   Technical Specifications : Body Material : Brass / Stainless SteelSight Window : Polycarbonate TubeO-Ring : SiliconRotor : Delrin PlasticMax. Temperature : 212oF / 100oCMax. Pressure : 230 PSIG / ~ 15 barsPressure Drop : 0.25 bar at max. Flow Click Here For More Details

• Material: Brass
• Usage: Industrial
• Suitable Gas: Oxygen

• Material: Stainless Steel
• Packaging Type: Single
• Color: Silver / Yellow
• Accuracy: +- 0.5% of FS
• Voltage: 24VDC
• Country of Origin: Made in India
• Brand: FORMONIX
• Application Media: Natural Gas, N2, Ar, CO2, H2, LPG, CNG, PNG, Biogas, Coal Gas, Clean Water, Liquid Paraffin, Diesel
• Usage/Application: Food, Pharma, Industry & Piping Industry
• Power Supply: 24VDC
• Electronics Enclosure: IP65, FLAME PROOF, EXPLOSION PROOF, WEATHER PROOF
• Flow Range: 0 TO 140 METERS PER SECOND (M/S)

• Features: Precise , Compact design, Reliable.

• Application Media: Water
• Power Supply: 24 V DC
• Range Ability: 10:1
• Process Temperature: 250 TO 325 Degree Celsius
• Process Pressure: 120 - 200 Kg/cm square
• Humidity Limit: 0 to 100% RH
• Body Material: SS 316

• Display: 3 1/2 digit, 1/2" red LED for flow rate
• nput: 4 to 20 mA DC or pneumatic (3 to 15 psi) optional
• Square Root Extraction: Provided in-built (optional)
• Range: Adjustable at site
• Count Rate: Adjustable at site
• Counter: 6 digit, Electromechanical or 6/8 digit, digital with battery back-up
• Transmitter Supply: 24 V DC provided for powering two-wire transmitter
• Retransmission output: 4 to 20 mA DC (optional)
• Supply: 230 V AC, 50 HZ (others on request)
• Mounting: Flush on panel
• Dimensions: Cutout : 1) 92mm x 92mm. 2) 136mm x 68mm Bezel : 1) 96mm x 96mm. 2) 144mm x 72mm
• Depth: Less than 200mm

• Application: Industrial, Residential
• Operating Temperature: 10-50D/C, 50-100D/C
• Driven Type: Electric
• Warrenty: 1 Year
• Size: Multisizes
• Feature: Accuracy, Digital Water Meter Display, Lorawan Compatible, Spiral Water Meter

We are the major Oil Flow Meters Manufacturer, Exporter and Supplier in Pune, Maharashtra. Our Oil Flow Meters are highly efficient as we manufacture them using high quality components and other raw materials. Our Oil Flow Meters have specialty in measuring low flows. Our Oil Flow Meters can work on any temperature, pressure or flow and provide correct readings. Specifications Manufactured for all lines sizes Suitable for any pressure, temperature and flow rate Resettable/ program display Rs 485 data interface Full SS-316 Body SS-316L Turbine

• cable length: up to 50 m / 164 ft

Vortex Flow Meter for saturated steam applications. With the optional pressure sensor the flowmeter has an integrated density compensation available, which even allows an exact measurement of gases and superheated steam with varying process conditions. The additional integrated gross and net heat measurement makes this flowmeter to be a reliable partner for advanced energy management systems.

flow meter for water /alcohol/fermented wash/molasses.

• Brand Name: Mass Flow
• Accuracy: ±0.5%
• Material: Steel - 10mm,15mm, 20mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm, 600mm, 800mm, 1000mm
• Place of Origin: Pune, Maharasthra
• Plastic: 1", 2", 3", 1/2", 1/4", 4", 6"
• Condition: Good

We are a major Electromagnetic Flow Meter Manufacturer, Exporter and Supplier in Pune, Maharashtra. Our Electromagnetic Flow Meters are the new battery powered electromagnetic flow meter. These Electromagnetic Flow Meters offer an accuracy of ±0.5% of actual value for sizes up to 150mm and ±1% for bigger sizes, making it possible to install a reliable flow meter virtually anywhere without sacrificing accuracy or performance if mains power is not available. Electromagnetic Flow Meter is powered by 2×3.6v lithium batteries placed inside the transmitter. Battery life of these Electromagnetic Flow Meters is up to 5 years. Communication is done via USB using MODBUS RTU protocol. This communication module allows the user to be in contact with his/her flow meter from any place in the world, via GPRS or just getting an SMS in the telephone number.About Differential Pressure Flow Meters -     Compact and remote versions are available (cable length limited to 6 meters for remote version)     Battery powered by 2×3.6v batteries placed inside the transmitter     Battery life up to 5 years battery conservation when the pipe is empty     Optional GPRS/GSM-SMS communication module     Baud - 19200operating systems- quad band 820/900/1800/1900 Mhz. multi-slot 10(4rx / 2tx / 5 sum) external antenna included  Material Used -     Steel - 10mm,15mm, 20mm, 32mm, 40mm, 50mm, 65mm, 80mm, 100mm, 125mm, 150mm, 200mm, 250mm, 300mm, 400mm, 500mm, 600mm, 800mm, 1000mm     Plastic - 1", 2", 3", 1/2", 1/4", 4", 6"

• Brand Name: USIS
• Display: Digital
• Voltage: 110 VAC,230 VAC,240 VDC
• Size: 15 mm to 450 MM
• Material: SS316L
• Usage/Application: ETP
• Frequency: 50 Hz
• Protection Class for Sensor: IP65

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

milk meter for all line sizes ,pressures,temperatures & all flow rates the flowmeters are compiatble of taking inlet milk with accuracy of 0.5% and the flowmeters can withstand 160 degree celcius so that they can be used for the cip,sip with an ease.

• Accuracy: ±0.5% F.S.
• Repeatability: ±1%
• Size: 15NB to 300NB
• Type of Output: 4 to 20 mA DC, Isolated
• Calibration Range: As per requirement (Factory Calibrated)
• Linearity: ±0.5%
• Process Temperature: 150oC max.
• Process Pressure: 10 kg/cm2 max.
• Material of construction: Lining - Neoprene / Rubber. PTFE (Teflon)
• Enclosure Protection: WP to IP-66 & FLP for Gas Groups IIA & IIB.
• Flange: MS / SS
• Electrode: SS 316
• Body: MS

We are offering chilled water flow meter. hdpe, pvc, and firefighting system in hdpe, compressed air piping in pb hdpe. our services are known for timely execution and use of high end technology to ensure complete satisfaction.

Positive displacement type flow meters divide the fluid in measured portions and then pump it. The flow can be calculated by multiplying the number of strokes with volume of fluid pumped in each stroke. These flow meters are accurate and deliver precise quantities of fluid.

• Accuracy: Upto ±0.5%
• Size Range: 15 NB to 900 NB
• Temperature Range: Upto 100 Deg.C
• Case Protection: IP 65/IP 66/IP 67
• Materials: Stainless Steel
• Process Connection: Flanged as per ASME B16.5

• Measuring range, flow: 10 … 400 cm/s
• Measuring range, temperature: -25 … 150 °C
• Max. measuring error: ± 2 % FSR , flow measurement, ± 8 cm/s , flow measurement, ± 1 °C , temperature measurement @ flow > 0 cm/s
• Step response time: 25 °C , adjustable
• Repeatability: < 5 s
• Down time at temperature step: < 10 s
• Wetted parts material: AISI 316L (1.4404)
• Surface roughness wetted parts: Ra ≤ 0.8 µm
• Degree of protection (EN 60529): IP 67,IP 68 , 30 min. @ 1 mH2O, IP 69K , with appropriate cable
• Shock (EN 60068-2-27): 30 g / 11 ms, 6 impulses per axis and direction
• Vibration (sinusoidal) (EN 60068-2-6): 5 g (10 ... 2000 Hz)
• Current output: 4 … 20 mA
• Voltage output: 0 … 10 V
• Output type: Digital (push-pull), NPN, PNP
• Switching logic: Active high, Active low, Normally closed (NC), Normally open (NO)
• Interface: IO-Link 1.1
• Hygiene: FDA compliant , EHEDG EL Class I
• Model: PF20H