Flow Meter Dealers in Chikhali, Pune

• Steel: 1",2",3",1/2",1/4",4",6"
• Steel: 1",2",3",1/2",1/4",4",6"

within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. a pick-up coil produces an electrical signal as each blade crosses through its low magnetic or rf field. this signal is amplified and conditioned by a transmitter or fed directly into a ratetotalizer, and represents the actual cubic feet per minute (acfm) flowing through the meter. the k-factor is stenciled on the meter body in pulses per actual cubic feet (pacf). because gases are compressible, most people desire to measure the equivalent amount of gas corrected for the line pressure and temperature to standard cubic feet per minute (scfm at 60â°f, 14.69 psia). if the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift the k-factor from pacf to pscf and a simple totalizer (measurement systems india make ) may be used. when flow temperature and pressure are not constant, a flow computer. specifications linearity 1 â±1.0%0.5% repeatability 1 â±0.25% maximum over-range 125% of flow rate for intermittent periods frequency output 0 to 1,100 hz voltage output approximately 100 mv@ 100 hz to 1.5 v (rms)@ 1,000 hz. pressure drop 0.5 psi at 100% of flow range pressure rating we manufacture flowmeters for most pressures. installation vertical or horizontal (any direction). materials of construction body: 316 l stainless steel. flanges: 316 stainless steel rotor: 431 stainless steel. rotor shaftbearings: standard: tungsten carbide v-cup cartridge frame retainer: 302 stainless steel cartridge frame: 316 l stainless steel. temperature range:meter with bearing structure of: standard: tungsten carbide: -40â°f to 300â°f (-40â°c to 149â°c). for other temperatures consult factory.

flow meter for water /alcohol/fermented wash/molasses.

These meters are based on the principal of differential pressure generated by Orifice element. Designed as per ISO5167BS1042. On line density compensation delivers very accurate results. Various Types of IBRNon IBR valves for isolation and drain. Various Sizes of Orifice Assemblies with or without IBR Certificate. Complete System is Engineered to suite your requirements. Highly Reliable and Repeatable System; No Moving Parts. Easy for Calibration.

• Size: Multisizes
• Type: Water Flow Meter
• Material: Aluminum
• Color: Available in Many Colors
• Feature: Accuracy
• Voltage: 110V
• Application: Industrial, Residential
• Operating Temperature: 10-50D/C

The company is located in Pune(India) and caters to the diverse requirements of the buyers. Delivering the orders on time is one of our specialties for which we are highly admired by the clients.

Use our GFM series flow meter for measuring flow rates of bio-gas, LPG, compressed air, steam (saturated & superheated) in closed pipes. The flow meter is suited for wide range of applications where affordability, reliability and ruggedness are of prime importance. In conventional system of measurement, the differential pressure generated by orifice plate is measured by D.P. transmitter. The output from D.P. transmitter after square rooting is accepted as proportional to flow - rate. This assumption is true only when density is constant. Unfortunately, density of compressible fluid is never constant. The density of compressible fluid changes with line pressure & line temperature. Thus, introducing errors in flow rate measurement.

• Weight: 4.6 kg
• Material: SS
• Repeatability: +/- 0.05 %

• Warranty: 2 Year
• Features: Designed for indoor use, with standard flow rates of 5 gpm (18.9 lpm) Manual and preset meters with a number of optional accessories to choose from
• Display: Digital
• Weight: 1.36 kg
• Battery Life: 1 Year
• Display Type: LCD
• Flow Rate: 5 gpm
• Dimension: 11 x 3.25 x 3.25 inch
• Operating temperature range: 0 - 48.8 Deg C
• Battery: 9 Volt Alkaline

• Input : 0-10 VDC / 4-20 mA / pulses
• Output : 4-20 mA to 0-10 VDC Optional ( isolated )
• Indication: 4, 5, 6 digit LED Display for flow rate 6 digit for totalisation
• Power Supply: 230 / 110 VAC , 24 VDC
• Accuracy : Better than + 2% Of F.S.
• Alarm: 2 Nos.
• Batch: 2 Nos. ( optional )
• Interface: RS 485 / MODBUS RTU / ASCII
• Mounting : Panel / field

We, as a Manufacturer, Supplier and Exporter, are indulged in providing Vortex Flow Meter. It is durable, efficient and robust. Our team of talented professionals keeps manufacturing process under rigorous supervision to make sure our quality is in conformity with different norms and standards set by industry. Hence, our customers can rest assured of the quality. We offer a range of specifications and designs.More about Vortex Flow Meter : The OPTISWIRL 4070C is the only vortex flowmeter with integrated pressure & temperature compensation in 2-wire technology. The OPTISWIRL 4070C provides a reliable measurement of operating, standard, volumetric and mass flow of conductive & non - conductive liquids, gases and vapours, even with fluctuating pressures and temperatures.

For requesting literature or any other information about Volumetric Fuel Consumption Meters, please use our Enquiry Form.

• Blue: White

These meters are based on the principal of differential pressure generated by Orifice element. Designed as per ISO5167/BS1042. On line density compensation delivers very accurate results. Various Types of IBR/Non IBR valves for isolation and drain. Various Sizes of Orifice Assemblies with or without IBR Certificate. Complete System is Engineered to suite your requirements. Highly Reliable and Repeatable System; No Moving Parts. Easy for Calibration.

Positive displacement type flow meters divide the fluid in measured portions and then pump it. The flow can be calculated by multiplying the number of strokes with volume of fluid pumped in each stroke. These flow meters are accurate and deliver precise quantities of fluid.

• Accuracy: +- 2.5% of actual reading
• MOC of flow element: SS 316
• DPT: With display
• Data logging: 4900 readings by default or extended 9800
• Comm port: RS485, RS232 (Optional)
• Comm Protocol: MODBUS, RTU
• Design standard: BS: 1042/ISO: 5167
• Typical turndown: 10:3, 10:1 (Optional)
• Density compensation: Online monitoring and compensation of density
• Gas Temperature: Upto 70 deg C
• Power supply: 85 to 265 V AC @ 50 Hz
• Type of flow element: Differential flow element
• End connection: Sorf flange
• MOC of flanges: MS/CS/SS

• Weight: 0.82 kg
• Accuracy: +/- 0.5 percent
• Repeatability: +/- 0.15 percent
• Display Type: Digital
• Usage/Application: Industrial
• Flow Range: 1.9 to 57 lpm
• Maximum Pressure: 34kPa,0.3 bar
• Flow Range: 1.9 to 57 lpm
• Maximum working pressure: 10.3 MPa, 103
• Minimum working pressure: 34kPa, 0.3 bar
• Operating temperature range: -20°C to 50°C
• Storage temperature range: -25°C to 50°C
• Wetted parts: Stainless steel, PBT (polybutylene terephthalate) nickel, nitrile rubber
• Batteries: 2 AA alkaline
• Expected battery life: 6 to 12 months

• Application Media: Water
• Power Supply: 24 V DC
• Range Ability: 10:1
• Process Temperature: 250 TO 325 Degree Celsius
• Process Pressure: 120 - 200 Kg/cm square
• Humidity Limit: 0 to 100% RH
• Body Material: SS 316

• Display: 3 1/2 digit, 1/2" red LED for flow rate
• nput: 4 to 20 mA DC or pneumatic (3 to 15 psi) optional
• Square Root Extraction: Provided in-built (optional)
• Range: Adjustable at site
• Count Rate: Adjustable at site
• Counter: 6 digit, Electromechanical or 6/8 digit, digital with battery back-up
• Transmitter Supply: 24 V DC provided for powering two-wire transmitter
• Retransmission output: 4 to 20 mA DC (optional)
• Supply: 230 V AC, 50 HZ (others on request)
• Mounting: Flush on panel
• Dimensions: Cutout : 1) 92mm x 92mm. 2) 136mm x 68mm Bezel : 1) 96mm x 96mm. 2) 144mm x 72mm
• Depth: Less than 200mm

We are one of the leading names engaged in offering Pelton Wheel Flow Indicators. These FI-PW series Wheel Flow Indicators offered by us are of MTD make and are also known as visual flow indicators. Simple in construction, the Wheel Flow Indicators range is suitable for transparent liquids and non hazardous gases. Widely used to prove flow of coolant, lubricants and fuel lines, the Wheel Flow Indicators are also used in turbines, engines, compressors, and other large machinery. These indicators are suitable for monitoring filter efficiency, pump operation, and flow direction.   Technical Specifications : Body Material : Brass / Stainless SteelSight Window : Polycarbonate TubeO-Ring : SiliconRotor : Delrin PlasticMax. Temperature : 212oF / 100oCMax. Pressure : 230 PSIG / ~ 15 barsPressure Drop : 0.25 bar at max. Flow Click Here For More Details

We are offering continuous flow measurement using rotor flow meter. protocontrol take this opportunity to introduce ourselves as representative of one of the largest global manufacturer of process control instrumentation products. gems sensor & control, designs and manufactures a broad portfolio of liquid level flow switches, pressure switches, miniature solenoid valves, and pre-assembled fluidic systems. gems sensors & controls has manufacturing facilities in usa, uk, and china. rotorflow® flow sensors 1. Provide visual indication, continuous sensing and accurate switching 2. Bright, visual indication with choice of pulsed dc output, or adjustable 1 amp switched output. 3. Flow ranges from .1 gpm to 60.0 gpm 4. Compact inline housings available in high performance plastic, brass or stainless steel housings. The rf-2500 series flow switch, has been totally re-engineered with a one piece composite rotor, stronger unibody construction, ceramic shaft and better sealing. the results are greater durability with broader chemical, temperature and pressure capabilities. switch types for specific flow setpoint switching, rotorflow® rfs type flow stitchesare one of the most reliable flow switches available. setpoints are fully adjustable over the specified flow range. the dynamic operation of the rotor guards against jamming and false actuation. output types for flow rate monitoring or metering applications. rotorflow® rfo type flow sensors provide a pulsed dc voltage output that is proportional to the rate of flow. the operating range of 4.5 to 24 vdc pulsed output is easily integrated into most digital logic units. rfa type rotorflow® sensors provide a continuous 0-10 vdc analog output.

• Accuracy: Upto ±0.5%
• Size Range: 15 NB to 900 NB
• Measuring Range: As per requirement
• Temperature Range: Upto to 400 Deg.C
• Case Protection: IP 65/IP 66/IP 67
• Materials: Stainless Steel
• Process Connection: Flanged as per ASME B16.5

• Accuracy: ± 0.5% of measured value (calibrated) at reference conditions
• Repeatability: ± 0.2% of span
• Suitable for Pipe Sizes: DN 10 to DN 600
• Media Conductivity (Min.): 10 μS/cm (Consult factory for 5 μS/cm)
• Media Pressure: PN 40 upto DN 80, PN 16 upto DN 200, PN 10 upto DN 600
• Media Temperature (PTFE): 0o - 180o C with Remote transmitter 0o - 120o C with Integral transmitter 0o - 90o C max for other liners
• Ambient Temperature Range: 0o - 50o C
• Materials ::  
• Pipe: SS 316 (Non - magnetic )
• Liner: PTFE / Neoprene / Polyurethane
• Electrode: SS / Hastelloy C / Ta / Ti / Pt
• End Connections / Flanges: Carbon Steel / SS 304 / SS 316 / SS 316L
• Coil Housing: Carbon Steel / SS, Epoxy painted
• Transmitter: Cast Aluminium (LM6), Epoxy painted
• Flange / End Connection Std.: DIN / ANSI / BS / SMS / TRI-CLAMP
• Power Supply: 110 / 240V AC ± 15%, 50Hz
• Power Consumption: 20 VA
• Cable Gland Entry: 1/2" NPT (F)
• Analog Output (Isolated): 4-20 mA DC / 0-20 mA DC
• Pulsed Output (Optional): Low Pulsed Rate Output 10 to 36000 pulses per hour
• Communication Port (Optional): RS - 232 / RS - 485 MODBUS RTU Protocol
• Maximum Load Resistance: 1000 Ω
• Response Time: 5 seconds 
• Flow Velocity Range: 0.3 to 10 m/s
• Ingress Protection: IP - 65 (IP - 68 on request)
• LED Display: 4 Digit Indication for Flow Rate and 8 Digit Indication for Totaliser Programming from Front Keyboard for Engineering Units
• For Flow between 20 to 100%: ± 1% of measured value (normal)
• For Flow between 0 to 20%: Refer Error Diagram below
• Power Supply: Nominal
• Ambient Temperature: 25o C + 2o C
• Load Resistance: 500 Ω
• Effect of Ambient Temperature: Less than 0.2% per 1o C
• Effect of Power Supply: Less than 0.1% per 10% Voltage variation
• Effect of Load Resistance: Less than 0.1% of span

• Features: Precise , Compact design, Reliable.

We are offering chilled water flow meter. hdpe, pvc, and firefighting system in hdpe, compressed air piping in pb hdpe. our services are known for timely execution and use of high end technology to ensure complete satisfaction.

• Material: Brass
• Usage: Industrial
• Suitable Gas: Oxygen

• Material: Stainless Steel
• Packaging Type: Single
• Color: Silver / Yellow
• Accuracy: +- 0.5% of FS
• Voltage: 24VDC
• Country of Origin: Made in India
• Brand: FORMONIX
• Application Media: Natural Gas, N2, Ar, CO2, H2, LPG, CNG, PNG, Biogas, Coal Gas, Clean Water, Liquid Paraffin, Diesel
• Usage/Application: Food, Pharma, Industry & Piping Industry
• Power Supply: 24VDC
• Electronics Enclosure: IP65, FLAME PROOF, EXPLOSION PROOF, WEATHER PROOF
• Flow Range: 0 TO 140 METERS PER SECOND (M/S)

• Measuring range, flow: 10 … 400 cm/s
• Measuring range, temperature: -25 … 150 °C
• Max. measuring error: ± 2 % FSR , flow measurement, ± 8 cm/s , flow measurement, ± 1 °C , temperature measurement @ flow > 0 cm/s
• Step response time: 25 °C , adjustable
• Repeatability: < 5 s
• Down time at temperature step: < 10 s
• Wetted parts material: AISI 316L (1.4404)
• Surface roughness wetted parts: Ra ≤ 0.8 µm
• Degree of protection (EN 60529): IP 67,IP 68 , 30 min. @ 1 mH2O, IP 69K , with appropriate cable
• Shock (EN 60068-2-27): 30 g / 11 ms, 6 impulses per axis and direction
• Vibration (sinusoidal) (EN 60068-2-6): 5 g (10 ... 2000 Hz)
• Current output: 4 … 20 mA
• Voltage output: 0 … 10 V
• Output type: Digital (push-pull), NPN, PNP
• Switching logic: Active high, Active low, Normally closed (NC), Normally open (NO)
• Interface: IO-Link 1.1
• Hygiene: FDA compliant , EHEDG EL Class I
• Model: PF20H

Gas Flow Meter

Medical Oxygen Flowmeter, Gas Meter, Flow Testing, High Pressure Flow Meter