Flow Sensors Dealers in Pune

• Type: ULTRASONIC FLOW SENSOR
• Brand Name: MFML
• Feature: Chemical Addition,Textiles,High-purity Chemical Dispensing,Water Addition,Fertigation,Dosing,Pump Protection.
• Place of Origin: Pune, Maharasthra
• Condition: Good
• Two Flow Range: 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm).

Engineered specifically for small diameter applications, the Mfml Turbine Ultrasonic Flow Sensor provides accurate readings in two flow ranges: 0.3 to 3.8 lpm and 3 to 38 lpm (0.1 to 1 gpm and 0.8 to 10 gpm). The injection-molded PVDF body and ceramic bearings provide excellent chemical compatibility and long service in dosing and batching applications. Union piping and tubing connections along with removable NEMA 4X electronics allow for easy assembly and field replacing ability. The mfml Ultrasonic Flow Sensor can be used with DN8 (¼ in.), DN10 (3/8 in.) DN15 (½ in.) tubing or DN15 (½ in.) piping for simple installation. End connections of the Ultrasonic Flow Sensor are available in PVDF for hose barbs, fusion socket or IR/butt fusion, and in PVC for socket or NPT thread.Fields of Application -     Chemical Addition     Textiles     High-purity Chemical Dispensing     Water Addition     Fertigation     Dosing     Pump Protection  Advantages -     Connection to rigid pipe or tubing unaffected by mounting angles     PVDF & ceramic wetted parts provide superior chemical compatibility     Low and High Flow rate capability     Both clear and opaque fluids     Compatible with most flow instrumentation There are many different technologies used in the measurement of flow. The choice of the most suitable type depends on a wide range of factors including the nature and viscosity of the fluid, the flow rate range and the accuracy of measurement required. Types Of Ultrasonic Flow Sensor -     Differential pressure flow meters insert an obstruction in to reduce the flow rate and thus the pressure. Flow rate is calculated by taking the difference between upstream and downstream pressures.     Positive displacement flow meters capture a liquid sample in a small container and calculate flow rate by counting the number of captures and fills.     The rotor in turbine flow meters spins at a rate proportional to liquid flow rate.     Variable-area flow meters typically contain a float that is forced upward by the fluid passing through. The point of equilibrium between this force and that of gravity indicates the volumetric flow rate.     As a liquid or gas passes through the (usually) bent vibrating tubes of a Coriolis flow meter, the tubes twist to a degree proportional to the fluid’s mass flow. The deflection is measured by a position sensor.     Magnetic flow meters operate on Faraday’s law of electromagnetic induction and therefore work only with conductive liquids. A current applied to coils mounted on or outside the flow pipe generates a magnetic field inside the pipe. The liquid passing through generates a voltage proportional to flow rate, which is detected by electrodes on either side of the pipe.     Vortex flow meters measure flow by placing a bluff body across the stream. Flow rate is calculated by multiplying the pipe area by the flow velocity, which is proportional to the frequency of the vortices generated by the bluff body. These devices are used with liquid, gas, and steam.     Multivariable differential pressure transmitters, when attached to or integrated with a primary element, measure temperature and/or pressure and use these values to calculate mass flow.     Thermal flow meters measure mass flow directly. Some of these devices put heat into the flow stream and measure how long it takes to dissipate; others measure the amount of energy required to maintain a constant temperature in the stream. They are used for low flows, primarily gas. Details -     Insertion Type Flow Sensor : Differential Pressure Flow Sensors Insertion Type     Thermal Mass Flow Sensors : Vortex Flow Sensor     Turbine Type Flow Sensors : Ultrasonic Type Flow Sensor

We are a high-flying name in this arena and thus, strive hard to deliver the best in class products to the clients. Also, we source the basic material from the reliable places. Our team of quality analysts ensures that the offered product is of unmatched standard and free from any kind of flaws. Details : Usage - Used to monitor liquid flow rates in pipes Approx Price - Rs 15,000 / Piece Features : High performance Accurate measurement Elevated durability

• MOC: CPVC
• Temperature Range: 0-80°C
• Process Connection for Sensor:  ½” BSP Female
• Process Connection for Flow: ¼” BSP Female

MicroSet Instrumentation & Controls reserves the right to make changes to this data sheet or the product without notice, as part of our policy of continued developments and improvements.  

XP is a Full Bore SS body Turbine Flow Sensor suitable for High Pressure water and oil application. Turbine flow sensor is a combination of freely rotating turbine assembly; SS housing and solid state pick-up tungsten carbide- Ceramic bearing makes it practically frictionless producing large linear range. Detachable square wave generated pick-up assembly is much advance solid state device to give output at noisy industrial environment. Variety of matching controllers and indicator are available suitable to match different electronic requirements.

We are offering following Flow sensors a. Thermal mass flow sensors b. Sensors for volumetric flow measurement a. Thermal mass flow sensors Our mass flow sensors for air and gases utilize a highly sensitive thermal measuring principle to detect even smallest flows. The sensors are based on highly stable MEMS silicon chip technology and feature fast response times, low power consumption and bidirectional sensing capabilities. b. Sensors for volumetric flow measurement Differential pressure sensors and rugged differential pressure transmitters for volumetric flow measurement from First Sensor detect the pressure drop across a flow element. Our flow-based ultra-low differential pressure sensors from 0.25 mbar (25 Pa) feature high sensitivity and offset stability as well as high immunity to dust contamination and condensation

• Type: Insertion Type Flow Sensors
• Brand Name: Aster
• Place of Origin: Pune

Being one of the reputed organizations in the market, we are engaged in offering an exclusive range of insertion type flow sensor. Our offered sensor is developed using the best quality components and advanced technology under the guidance of our skilled personnel. This sensor is checked on well-defined parameters of quality, in order to offer flawless products at the clients' end. Further, clients can avail this product from us in various models. Features: inexpensive and accurate each fitting individually calibrated and marked with factor. (mlpulse) ceramic ball bearing for superior low flow performance high level (5 vdc) signal can be sent up to 10ft.without transmitter insertion type sensor also available with solvent cementable adapters for pvc tees available flow ranges: line size flow range m3hr. min. Max. 40 nb 0.5 19 50 nb 3.5 35 65nb 5 50 80nb 9 90 100nb 14 140 125nb 22 220 150nb 30 300 200nb 50 500

Multi sensor with integrated electronics for flow and temperature measuring of air and gases. Aerodynamically optimized sensor tip without moving parts resultingin widely independent direction characteristics. Active temperature compensation within the overall specified temperature range. Analog output signals for flow velocity and temperature.

Item Code: MS-Bi-Directional-Flow-Sensor Bidirectional Paddle flow switch use new structure, could monitor the flow by Two-way. It is operate by micro magnetic reed switch, it is normal Open, when flowing water push the paddle, the transfer structure change the switch condition, it close. This flow switch could be Anti Explosion-prrof. Specification: * Work Temperature: -30C – 150C * Max Pressure: 30bar * Output: 40W 250VAC/DC SPDT * Work Medium: water and oil * Pressure Loss: less than 0.01bar * Installation: 1”PT; Insert * Pipe Size: DN20~DN200 * Protect Grade: IP65 (GE-341C) * Explosion-Proof Grade: ExdIICT6 (GE-341B)

Flow meters are used in many industrial branches, particularly in the area of automated production. Various flow sensors allow exact and precise control of the flow rates and they can act quickly and automatically. In this way, a distinction is made between purely reactive systems which trigger an action when a certain flow rate is reached, and those systems which, as flow sensors, exclusively monitor and count the flow rate.Both types of systems offer a large number of variations and options. Flow sensors can be equipped with a corresponding display in order to allow a reading of the flow rate directly. By means of a measuring transmitter, some of the flow meters can also be connected to central data systems via a BUS interface, which can access the data of the flowmeters. This ensures continuous monitoring of flow rates without any problems.

We are offering rotor flow sensor. protocontrol take this opportunity to introduce ourselves as representative of one of the largest global manufacturer of process control instrumentation products. gems sensor & control, designs and manufactures a broad portfolio of liquid level flow switches, pressure switches, miniature solenoid valves, and pre-assembled fluidic systems. gems sensors & controls has manufacturing facilities in usa, uk, and china. rotorflow® flow sensors 1. Provide visual indication, continuous sensing and accurate switching 2. Bright, visual indication with choice of pulsed dc output, or adjustable 1 amp switched output. 3. Flow ranges from .1 gpm to 60.0 gpm 4. Compact inline housings available in high performance plastic, brass or stainless steel housings. The rf-2500 series flow switch, has been totally re-engineered with a one piece composite rotor, stronger unibody construction, ceramic shaft and better sealing. the results are greater durability with broader chemical, temperature and pressure capabilities. switch types for specific flow setpoint switching, rotorflow® rfs type flow stitchesare one of the most reliable flow switches available. setpoints are fully adjustable over the specified flow range. the dynamic operation of the rotor guards against jamming and false actuation. output types for flow rate monitoring or metering applications. rotor flow® rfo type flow sensors provide a pulsed dc voltage output that is proportional to the rate of flow. the operating range of 4.5 to 24 vdc pulsed output is easily integrated into most digital logic units. rfa type rotorflow® sensors provide a continuous 0-10 vdc analog output.

• Condition: New
• Material: Stainless Steel
• Usage: measure liquid flow rates in full pipe
• Product Type: stainless steel flow sensor

air flow sensor, Flow Meters, Gas Meter

Flow Sensor, Pumps, Nozzles, Strainers, Flowmeter, Air Eliminator

Water Flow Sensor, Smart Card, MIfare Classic 1k Card 13.56MHz, L298 IC