Gas Sensors Dealers in Pune

• Type: Gas Flow Sensor
• Brand Name: Mass Flow
• Country of Origin: Pune, Maharasthra
• Condition: Good
• Unit: Manufacturer

The Gas Flow Sensor, which we offer, is delivered individually and packed with standard accessories. VT-D-R relay Gas Flow Sensor model is equipped with clear displaying console. The switching point and the hysteresis of relay of this Gas Flow Sensor can be configured by, push button and display user interface.

• Material: Fiber
• Display Type: Digital
• Measurement Range: 0-1000ppm
• Weight: 300g
• Battery Type: Lithium

• Brand Name: MicroSet
• Measuring Range: 0
• Model Name/Number: MS DO 714
• Expected Operating Life: 2 Years

this series of steam sterilizable electrodes are designed for economical use. They are constructed very similar to the standard ph electrodes, have a 10 and 12mm body, and can be ordered with the desired length. Length is determined by the insertion depth on the under side of the fermentor head plate to the tip of the probe. Glass disposable electrodes are available in galvanic styles to fill all requirements. The glass do probes are available for laboratory fermentation, where sterilization takes place in a separate autoclave. The disposable dissolved oxygen electrodes are compatible with most common oxygen amplifiers. Glass body oxygen electrodes are non temperature compensated and are required to be kept at a constant temperature. Calibration must be made at the same temperature as the controlled fermentation. The electrodes feature external filling tubes. Electrolyte can be added during use without removing the electrode from the vessel. The electrode membranes can be replaced very easily. However, some skill is involved in replacing them. specification type : galvanic cathode : ag anode : pb body : glass diameter : 10mm response : 98% in 90 seconds temperature compensation : no. temperature : range : 0 to 60°c sterilization temp : 130°c residual signal : 0.5 ±1 mv output (medium saturated with air) : 40 mv ± 5 mv

• Weight: 4.4 oz (125g)
• Sensor: Single beam, dual wavelength NDIR
• Relay Output: SPST NO rated 2 A @ 30 VDC
• Enclosure Rating: IP20
• Agency Approvals: CE
• Non-Linearity: 16 ppm
• Carbon Dioxide Range: 0 to 2000 or 0 to 5000 ppm
• Temperature Range: 32 to 122 Degree Fahrenheit (0 to 50 Degree Celsius )
• Accuracy: CO2 Plus Minus 40 ppm Plus Minus 3% of reading; RH - Plus Minus 2% (10 to 90% RH)
• Temperature Dependence: Plus Minus 8 ppm /Degree Celsius at 1100 ppm
• Pressure Dependence: 0.13% of reading per mm of Hg
• Response time: 2 min for 99% step change
• Duct Air Velocity Range: 0 - 4000 FPM (20.32 m / s)
• Humidity Limit: 10-95 % RH, Non condensing
• Power Requirement: 16 to 35 VDC or 19 to 28 VAC
• Power Consumption: Average-2 W, Peak - 3.75 W
• Current Output: 4 to 20 mA (max 500 Ohm)
• Voltage Output: 0 to 5 VDC or 0 to 10 VDC (min 500 Ohm)
• Minimum Order Quantity: 10 Piece

Our Zirconia Analyser Model ACCURRA-Zr measures Oxygen online from 0.1-21% level in almost all applications such as Combustion Process, Metal processing, Petrochemical & Refinery Processes, Power Plants etc. the list is endless. It can be used in Combustion Control System to achieve the Stoichiometric ratio.

• Operating Voltage: 5V
• Model / Part Number: MQ-3
• Target gases: alcohol
• Operating Humidity: 0-95%RH
• Preheat Duration: Over 24 hour
• Circuit voltage: 5V+-0.1
• Load resistance: 200K ohm
• Heater resistance: 33 ohm +-5%

• Brand Name: Hausser
• Material: Stainless Steel
• Usage/Application: pharmaceutics and biotechnology
• Reference temperature: 25 Degree C (77 Deg F)
• Reference pressure: 1013 hPa (15 psi)
• Repeatability: +/-1 % Of The Measuring Range End
• Ambient temperature range: -5 to +135 Deg C (23 to 175 Deg F)
• Ingress protection: IP68

• low power consumption: longlife

Themf010 serieslow temperature oxygen sensors is designed to determine the oxygen concentration in air or inert gas mixtures with temperatures of-100 ã�â°c to 250 ã�â°c [-148 ã�â°f to 482ã�â°f]max. the mf020serieshightemperatureoxygen sensors is designed to determine the oxygen concentration in air or inert gas mixtures with temperatures of-100ã�â°c to400ã�â°c [-148ã�â°fto752ã�â°f]max. these products are particularly suitable for measuring oxygen in areas that are not easily accessible, or inclosed systems, such as ventilation pipesand containers. The mf010and mf020 series may both be supplied with a measuring range.

The LXT-220-D08 optical dissolved oxygen sensor uses a fluorescence quenching method to determine the oxygen concentration in water. The use of this Optical Dissolved Oxygen method by the LXT-220-D08 minimizes maintenance, increases reliability and improves the long term accuracy of the measurement. Combine this improved measurement technology with the rugged, easy to install design and the LXT-220-D08 provides the best solution for long term measurements in aeration basins, aquaculture and all types of environmental water.   Features • Optical technologyMinimum maintenanceLong maintenance intervalsStable measurementMaximum measurement accuracy• No flow neededMeasurement possible in still water• Intelligent sensorSelf monitoringStorage of calibration data in sensor• Digital data transmissionInsensitive to electromagnetic interferences• Dual Channel CapabilityLower Cost - 2 DO8 sensors per analyzer

combustible gas sensor, Duct Burners, Combustible Gas Detector

carbon dioxide sensors, Ozone Generators, voc sensors, o3 sensors

oxygen sensors, Automotive Sensors, Speed Sensors, Sensors, proximity

Gas Sensors / Transmitters, Hand Held Digital Thermometer

Dissolved Oxygen Sensors, conductivity transmitter, conductivity sensors

MQ2 General Combustible Gas Sensor, Smart Card

Gas Sensor, Presence detector, optical sensors

MQ-5 Gas Sensor, power transistor, Four Channel Relay Boards

Envitec Oxygen Sensors