Gas Valves Dealers in Pune

• Type: Gas Valves
• Material: Alloy
• Finishing: Polished
• Size: Multisize
• Application: To Control Leaking Gas
• Feature: Easy To Fit

We are the main supplier of this product.

• Brand Name: Dungs
• Material: Stainless Steel
• Model Name/Number: MVD210/5
• Pressure: 7 PSI
• Coil Voltage: 110V
• Control: Direct-Operated
• Operating Time: 100 % duty cycle
• Initial Lift Adjustment: 35%
• Test Ports: 1/4 NPT
• Closing Time: 0.1 Sec
• Nominal Diameter: NPT 1/2 - NPT 3
• Pressure Stage: PN 1
• Fast Stroke: Adjustable

We are engaged in offering premium Manual Reset Natural Gas Solenoid Valves. Manual Reset Natural Gas Solenoid Valves offered by us are obtained from reliable sources, and thus are quality assured. These Manual Reset Natural Gas Solenoid Valves are very cost effective as well. Details TORK series S8011 diaphragm Manuel reset gas solenoid valves are 2/2 way normally openSize : 3/8� to 2�Pressure : 500 mbarThe valve is a normally open valve and manual reset and will be closed when energized

• Size: 1/2inch
• Type: Brass Gas Valve
• Material: Brass

We supply a range of brass gas valves for use with Unipro Gasline pipes and fittings. The valves are high performance and can be used for both domestic and industrial supply. 

• Type: Gas Cylinder Valves
• Material: Brass
• Feature: Easy To Fit, Good Quality
• Condition: New
• Pressure: 200 bar
• Country of Origin: India
• Brand Name: VANAZ

Gas cylinder valves the design requirements of international specifications EN13153, EN13152 & EN12864 etc.The new design incorporates two lock pins Safety setting is conducted on 100% production and is in accordance with CGABSEN norms. • Carry standard markings. Special markings with bulk orders can be arranged.

• Model Number: 4545
• Brand Name: Drp
• Type: Water Ball Valves
• Application: Water Fitting
• Number Of Way: 2way
• Country of Origin: India
• Material: Brass
• Media: Water
• Pressure: Medium Pressure
• Connector Type: Screwed
• Temperature Of Media: Medium Temperature
• Automation Grade: Automatic

• Country of Origin: India
• Material: Brass

• Material: Brass
• Pressure: High Pressure
• Color: Golden
• Country of Origin: Made in India
• Finish: Coated
• Application: Industrial
• Uses: Gas Cylinder

• Construction: Single piece/Two-piece/Three piece/ Plastic
• Bore: Full Bore/Reduced Bore
• Size Range: DN 15 – DN 150
• Class: Class 150 -2500
• End Connection: Wafer/SW/BW/Flanged/Threaded
• End Connection standard: SW : B16.11, BSPT : ISO 7-1, NPT : B1.20.1, Flanged : B16.5 RF, FF, RTJ
• Testing: ISO 5208/MSS SP-61/API 598

• Material: Metal
• Automation Grade: Manual
• Application: Water Fitting
• Feature: Smooth Finish And Robust Design

PARTH VALVES AND HOSES LLP is pleased to offer top-of-the-line products in pipeline flow control. The PARTH VALVE AND HOSES ‘s Ball Valves have been developed with extensive application, design and manufacturing expertise. These products are produced by employing modern manufacturing practices under a robust quality assurance system. These practices ensure consistent product quality and dependable performance. The PARTH VALVE AND HOSES ‘s Ball Valves have been designed to include state-of-the-art features that are described in this bulletin.   TECHNICAL DATA PARTH VALVES AND HOSES has extensive experience in manufacturing floating ball valve as well as Trunnion Mounted Ball Valves, Full bore ball valve, Reduced bore ball valve, both Soft and Metal Seated. Size: 1/2” up to 12“(DN 15 up to DN 300) Pressure Rating: ASME 150# to 300# Materials: Carbon Steel, stainless Steel (SS304, SS316, SS316L) Duplex Stainless Steel, Super Duplex Stainless Steel, Alloys. Design Standard: design generally conforms to ASME B 16.34-2004 / API6D / BSEN ISO 17292 (BS5351); DIN EN 12516 Also, IS9890-1981 Temperature Rating: -10 degree to 230 degree. Test (Inspection) Standard: IS 6157-1981, BS 6755 Part 1/API 598 Construction Details: Single / Two / Three Piece Design / Side Entry / Trunnion / Full Bore/Reduced bore/ Block & Bleed / Soft and Metal Seated End Connection: Screwed, Socket Weld, Flanged, Butt-Weld, Triclover End, SMS/DIN union End. Operator / Actuator: Lever, Gear, Actuator (Pneumatic, and Electric Motorized) Special Service almost all PARTH VALVES AND HOSES can designs in a special version as per customer’s Requirements. In this case, all the material details and technical features are given by the Customer & all Design aspects from us.   We are Manufacturer, Exporter, Supplier, Authorized Dealer & Solution Provider. Our setup is situated in Pune, Maharashtra, India & majorly we serve our customers from countries like Shri Lanka, Bhutan, Bangladesh, Malaysia, Indonesian, Nepal, Europe, Africa, Gulf countries like UAE, Dubai, Bahrain, Oman, Qatar, Saudi Arabia, Egypt, Jordan, Lebanon, Syria, Yemen, Kuwait etc.  

• Size: 3/4" THRU 8"
• Brand Name: MAXON

We are offering Ball Valves in Fire Safe Execution. Product feature extra high cycle life provided by spherical segment stem split body design facilitates inspection and repair. Investment cast body construction blow-out proof stem internal anit-static device triple stem sealing above 2" size iso 5211 mounting dimension for easy automation fire safe in compliance with api 607. Air cushioned handle sleeve for confortable manual operation.

▪ Slow open type cutoff valve compatible with medium pressure (0.3 MPa) gas.

• Brand Name: TOP FLOW
• Media: Water, Gas, Oil
• Body Material: Brass
• Finishing: Chrome Plated
• Technique: Hot Rolled
• Thread size: 1/2"- 2"
•  :  

Revata Engineering's Tubing Retrievable Injection Pressure Operated Gas Lift Valve are primarily controlled by injection gas pressure. The valve, when installed on outside mount tubing retrievable mandrels, is used to control gas pressure and its flow from the annulus into the tubing.   The valve is designed with a sealed chamber, including a three-ply bellows assembly that contains a nitrogen precharge, which provides the closing force of the valve. When injection gas pressure exceeds the closing force, the bellows compresses, thus lifting a valve stem off a seat allowing gas to be injected through the valve.   These valves are available in either Stainless Steel or Nickel alloys for corrosion resistance in wells with high concentrations of H2S or CO2. Elastomeric materials for the valve are available for standard service or special service to suit individual well conditions.   Please refer to our SPARES FOR GASLIFT VALVES for more details on spares available for Gas Lift Valve repair and maintenance.   FEATURES & BENIFITS: Our WLR IPO Gas Lift Valves are available in Stainless steel or premium materials. The Gas Lift Valves use Three-ply Monel® 400 bellows. The Bellows connections are Silver Brazed. Mechanical stop feature prevents the bellows overstroke. A viscous Silicone based fluid is used to create a fluid shear which dampens the bellows preventing damage to it as well as preventing pounding of the stem to the seat. Tungsten carbide balls ensure long lasting operation. The replaceable floating Monel® 400 seats. Tungsten Carbide seats are available upon request. Optional reverse flow check valve. Pressure rating up to 1,800 psi (124 bars) test rack open. Temperature rating of 250°F (121°C) (Standard Service) Compatible with other manufacturers of side pocket mandrels.

Engineering Options: S.S. 304/316 Parts can be supplied Glass-filled PP/PTFE BALL on request   Available M.O.C.: PP (POLYPROPYLENE) HDPE (HIGH DENSITY POLYETHYLENE) ISOTACTIC PP PVDF (POLYVINYLIDENE FLUORIDE)