Globe Valve Dealers in Pune

• Material: Steel,Stainless Steel
• Pressure: 798 psi g (55 bar g)
• Maximum working pressure: 798 psi g (55 bar g)
• Fluid temperature range: -60°C to + 150°C (–76°F to 302°F
• Driving Mode: Manual

• Size: 1/4" to 6"
• Brand Name: Carten
• Type: High purity Valves 

• Pressure Seal: #1500, #2500
• Size: 1/2"TO2"
• PRESSURE CLASS: #1500,#2500
• Design Standard: API602 / ASME B16.34
• Inspection Standard: API 598 / BS6755
• Face to Face: MFG.STANDARD
• End Connection: BUTT WELD AS PER ASME B 16.25 SOCKET WELD AS PER ASME B16.11 SCREWED AS PER ASME B1.20.1
• Body: ASTM A105N/ ASTM A350 LF2 / ASTM A182 F11-CL2/ ASTM A182 F22- CL3/ ASTM A F91/ ASTM A182 304L/ ASTM A182 F316L
• Plug: ASTM A217 GR.CA15 / ASTM A276 TYPE 410/ ASTM A217 GR CF8M/ SS316/ ASTMA217GR.CF8 SS304
• Seat: ASTM A276 TYPE 410/ SS316/SS304/ASTM AA276 TYPE 410 + ST6
• Gland Packing: INCONEL BREADED RING WITH CORROSION INHIBITOR + MOLDED GRAPHITE RING

Highlights : Applicable to R717(Ammonia), R744(CO2), HCFC and HFC. Also utilized in chemical and petrochemical applications. Quick and simple valve maintenance. It requires less effort to replace the top part and no welding is required. Designed to operate at very low differential pressure of 0.58 psi g(0.04bar). Modular Concept: Each valve body is available with a number of different sizes and connection types. Possible to transform/convert MSCA-S and MCHV into any other product of MSVL family (stop valve, regulating valve and strainer) by replacing the entire top part. Each valve type is clearly mentioned with type, size and operating range. Designed with an integrated damping chamber preventing valve flutter in case of low refrigerant velocity and/or low density. Quite easy to disassemble for inspection and maintenance. Damping facility provide protection against pulsation. Internal backseating enables the replacement of the packing gland (spindle seal) while MSCA valve is in working condition. Optimal flow characteristics ensure quick opening to the fully open condition. Valve body and bonnet material is low temperature steel as per PED norms. Maximum working pressure: - 754 psi g (52 bar g). Operating temperature range: - 60 to +150°C (– 76 to 302°F).

Bellow sealed valves are a new type of Industrial Process valves. These valves are popular due to the leakage free performance hence, called “Zero Leak Valves” or “Emission Free Valves”. With the application of Bellow seals the gland packing is supplemented by a metallic Bellow cartridge. One end of the Bellow is connected to the valve bonnet and the other end to the stem. The bellow movement is in one plane as the stroke in the valve takes place. With no rotational movements involved the fluid gets sealed to a very high degree. The fluid flows through the bottom part of the valve as per the stem movement takes place. Due to the bellow covering the stem the seal does not contact the stem at all. As the stem is the moving part in the valve it is the source of leakage due to the wear and tear of gland packing. Due to this shielding of the stem by the bellow the valve operated in a leak free zone.

Making judicious use of our high tech facility and latest equipment, we have established ourselves as a top player in the industry. The product range includes, Globe/Stop Valves and Safety and Relief Valves  (Bellow Sealed Safety Relief Valves, Bellow Sealed Globe valves), High Pressure Angle Pattern Drain Valves (Single Stage and Multi-Stage), Angle Pattern Blow Down Valves, High Pressure #2500 Control Valves, Turbine Bypass Valves, H P Heater Bypass Valves, Isolation valves including the Gate Globe , Swing Check and Ball Valves range. We offer Gate Globe Check Valve to our esteemed customers at attractive price. It boasts striking features such as durability, strong built and light weight. Our excellent distribution system facilitates quick delivery to your doorstep in no time at affordable prices.

Globe Valves in various sizes & pressure ranges sultable for On/Off and control applications in the process Industry can be offered duly mounted with Electical Actuators, dependiing upon the thrust requirements the actuators can be offered in Single or Three Phase Electric supply. The accessories such as Positioners, Feedback Transmitters, which are required for close loop systems can also be offered as a complete system.

We are a renowned Manufacturer & Supplier of Industrial Valves like Bellow Sealed Valves which are used in diverse industries such as Power, Chemical & Process industries. Our advance machinery allows us to offer diverse range of Bellow Sealed Valves, at market leading prices. Please contact us for ordering these Bellow Sealed Valves in bulk.

• Pressure: Medium Pressure
• Packaging Type: Box
• Valve Size: 15 MM
• Brand: Saad
• Media: Water
• Size: 15 to 100 mm
• Seat Type: PTFE
• Usage/Application: Industrial

we offer the simplest and the most economical configuration of extended bonnet ball valve with circular bonnet join. Our company is the renowned manufacturer and supplier of extended bonnet ball valve in the industry. We offer customized packaging facility as well, to cater to different requirements of the clients. attributes durable fire safe non corrosive

Globe Valves are used in applications requiring throttling and frequent operations. FM Parabolic, Vee-type regulating, Swivel and guided plug and stem, Soft seat are offered for different applications as required.

VOLFRAM make Valves are tight sealing, easy operation, regulation valves for liquid and gaseous fluids over a wide range of line pressures and temperatures. Globe valves are of outside screw & yoke (OS & Y) and with bolted bonnet construction. The outside screw ensures easy lubrication and prevents corrosion and erosion by line fluids. Features Globe Valve:   Body & Bonnet: The body is designed for strength to meet the operating conditions and contoured to minimize erosion and resistance to flow. The bonnet is provided with renewable back seat arrangement. Disc & Stem: The disc provides a fine bearing on a taper seat for tight sealing over wide range of differential pressures. As the seating between disc and body seat is a narrow line contact, tight sealing can be achieved even if any foreign particle gets stuck to the seating area. The disc and stem are held together by a disc nut with allowance for disc to swivel. The disc nut is tack welded to prevent loosening in service. Body & Seat Ring: The seat ring is seal welded to provide a bubble tight joint. Back Seat Arrangement: The back seat is designed to relieve back pressure on the stem packing when fully seated. Seating Surface: Globe valves can be offered with stellite seat, if specified. Stellited seat ring provides increased resistance to ware, abrasion and erosion of the sealing surface. Gland Arrangement: The stuffing box holds a minimum of 6 packing rings to enhance gland tightness and increases the life of packing rings. End Connection: Standard valves are offered with flanged ends (butt weld ends provided on request) to the following standards:   - Flanged      :ASME B 16.5 Raised Face   - Butt Weld   :ASME B 16.5 to suit the corresponding pipe schedule Standards:   Design : BS-1873 Face to face / Dimensions  : ASME B 16.10 Testing : BS 6755 Part I (EN 12266-1) Valves can also be offered with IBR certification. Accessories: Globe Valve can be supplied with accessories like Extended Stem Arrangement, Gear Operation, and Pneumatic Electric Actuators, Chain Wheel Arrangement, Drain Plug etc.

• Material: High quality raw material
• Brand Name: Greatweld
• Product Name: Globe Valves
• Packaging: Bulk
• Condition: Good
• Place Of Origin: Pune,Maharasthra

As, we have an extensive distribution system; we can gratify patrons by fulfilling massive requirements and making delivery as per schedule. The check on quality has been kept by our experts who ensure that the inputs we source are free from any sort of impurities. Thus, we ensure quality products at buyer's end.

Rutcon series 1121 globe control valves are produced by combining technology engineering, modern manufacturing tech techniques & stringent quality control procedures. A wide variety of trim options, combined with design flexibility will satisfy majority of critical and non - critical applications found throughout the process, power and oil industries. sizes: ½” to 16” (15mm to 400mm) higher sizes available on request ratings: ansi b 16.5 150# to 2500# other standards available on request. application: to control large range of process parameters, specially for oil and gas production, power generation, chemical, petrochemical, fertilizer, pharmaceutical, processed food and other process industries design & performance feature:  high flow capacity and high flow gain.  streamlined flow passage and excellent flow control range ability.  high range ability using low flow trims  high powered actuator, field reversible on request.  streamlined flow passage and excellent flow control range ability.  tight shut off permissible  high range ability using low flow trims  large variety of trim design varying from contoured trims to single stage ported and multiple stage low noise anti cavitations trims  end connections to suit any pipe work configuration as per standards.  can be supplied with wide range of interchangeable trims sizes  leak proof packing are available on request  characteristics - equal percentage, linear and quick open.

• Material: Carbon Steeel
• Automatic Grade: Automatic, Manual
• Number Of Way: 2way, 3way
• Size: 2inch, 4inch
• Type: Bellow Seal Valve
• Application: Gas Fitting, Water Fitting
• Pattern: Plain
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Anti Dust, Casting Approved, Durable
• Certifications: ISO 9001:2008 Certified

The Pfeiffer 1a PTFE line globe control valve is designed for general service applications up to the limits of the ANSI 150 pressure class rating. These general service applications focus on extremely corrosive media found in chemical processes. The Pfeiffer 1a can be assembled with a pneumatic, electric, hydraulic, or electro-hydraulic actuator also offered by the SAMSON group to complete the control valve construction. These control valves are designed according to the modular assembly principle, can be equipped with SAMSON GROUP actuators and valve accessories such as positioners, limit switches, and solenoid valves.   FEATURES & BENEFITS Pfeiffer 1a PTFE lined globe valve offers the optimal solution for addressing aggressive or corrosive media especially in the chemical industry. Low cost alternative to exotic material required to handle aggressive or corrosive media Exchangeable PTFE seat and PTFE plug Stem sealed by PTFE bellow with an additional safety packing as secondary seal Test connection for monitoring of the bellow primary seal and detecting leakage Low permissibility with a standard PFTE liner thickness of 5 Ñ 8 mm SPECIFICATIONS Size:1" to 6" ANSI Class:150 Std. Materials: PTFE Lined Cast Iron Temperature Range:14 to 392℉ (-10 to 200℃)

• Material: Stainless Steel
• Usage/Application: Air
• Pressure: Medium Pressure
• Power Source: Electric
• Model Name/Number: 60 NB,80 NB,100 NB,125NB 150 NB
• Material Grade: SS 306,SS 316
• Surface Treatment: Color Coated

• Material: Aluminium, Brass, Carbon Steeel, Cast Iron, Cast Steel, Metal
• Color: Blue, Sky Blue, White
• Structure: Double Half Shaft, Pinless
• Size: 1.1/2inch, 1.1/4inch
• Type: Globe Valve
• Pattern: Plain
• Power: Hydraulic, Manual, Solenoid
• Pressure: High, Medium