Hammers Dealers in Pune

Air hammer are quite effective hammering tools forged by Sumake which are used in industries and automotive . This needs low maintenance cost and highly operational.

• Weight: 1-2Ton
• Finishing: Non-Polished
• Handle Material: Metal, Wooden
• Warranty: 1Yrs
• Hammer Type: Claw Hammer
• Handle Length: 12inch
• Application: Industries
• Feature: Magnetic Nail Start, Precision Balanced, Rust Proof

• Warranty: 1 year
• Power Consumption: 1,500 W
• Impact Rate: 900 - 1890
• Impact Energy: 16,8 J
• Brand: Bosch
• Item Weight: 10.1 kg
• Length: 22.44
• Height: 10.62

• Safety: Less injuries
• More productivity: More profitability
• Less workmen's compensation: Less man-hours required

GURU NANAK STRESS RELIEVERS PVT. LTD.: Authorized Distributor in India for Slide Sledge Multi-Head Hammer, Petersen Brands, USA Servicing of heavy equipment / machines need extreme impact tools to 1. drive pin rolls 2. insert / replace bushings 3. change worn out items 4. shear rusted bolts Normally above done by two persons – one holding tool & other swings large sledge hammer. This could result in 1. injuries / smashed thumb 2. flying steel shrapnel Slide Sledge, Petersen Brands, USA, is a better way which uses 1. one person 2. one tool operator 3. maximum impact with precision & control 4. over 20 applications specific tips – for fast work Slide Sledge has Advantages of 1. safety 2. less injuries 3. less man-hours 4. more productivity 5. more profitability Application of Slide Sledge in heavy machinery / equipment used in 1. Mining 2. Railroads / Railway Workshops 3. Military – Heavy Vehicles / Machinery used for Construction, Transportation, Tracked 4. Infrastructure 5. Cement & Fertilizer 6. Ship Building & Aero 7. Sugar Factories & Agriculture Benefits: 1. Increases profitability by: â€Â¢ Eliminating special equipment or extra operator by using task specific tips â€Â¢ one man operation â€Â¢ down time reduced to minimum 2. Simplifies field maintenance / repairs: â€Â¢ Remove & install pin on any type of field equipment â€Â¢ Cut & shear rusted bolts in seconds â€Â¢ Reach between bucket teeth for easy removal & installation â€Â¢ Adapt to separator forks for fast & easy change outs 3. Promotes a safer working: â€Â¢ Minimizes operator effort, injury & muscle starin â€Â¢ Eliminates flying debris associated with hammer & chisel 4. Adapts to numerous applications â€Â¢ With interchangeable application specific tips - allows one tool to do job of many â€Â¢ Quick change of tips 5. Delivers powerful & precise impact â€Â¢ Delivers maximum (18,000 psi) impact force â€Â¢ Can use additional 5 lbs hammer weight for additional impact force

• Type: Portable
• Application: Construction, Industries
• Feature: Durable, Fully Heat-treated, Polished Bell Face
• Finishing: Polished
• Driven Type: Pneumatic
• Warranty: 1 Year

Our Claw Hammer is acclaimed for its quality and precise make. Before making the final dispatch, our entire lot is carefully stored in our capacious warehouse under the administration of experts. Thus, there are minimal chances of defects at buyer's end. Catering to the ever-evolving packaging requirements of the clients, we make certain that our professionals use only the finest packaging material to circumvent loss during transit. Features: Durable Fine finish Precise quality Easy to use

The new version of the famous Air Tech axe. The head, which is hot forged from a single piece of steel, has become an established alpine classic. The new shaft’s gentle curve just below the head gives greater clearance and makes anchoring easier on any sort of terrain, whilst the lower straight part of the shaft will penetrate into snow with little effort. Also available with Slider, the new hand rest that slides to the top of the shaft when sunk in snow or to the bottom to support hand in traction. The huge success of the Air Tech Evo has encouraged us to create the perfect complement: an Air Tech with a hot forged hammer. The most advanced axe technology, all in under 500 grams! Both Axe and Hammer are the same weight.

• Features: Longer service life, Resistance against abrasion and corrosion, Perfect finish

• Brand Name: Indus Rock Tool
• Material: Indus Rock Tool
• Processing Type: Manufacturing
• Finishing: Polished
• Handle Material: Steel
• Color: Black, Black
• Condition: New
• Application: DTH Use
• Size: Top Hammer Accessories
• Feature: Durable, Fully Heat-treated, Magnetic Nail Start, Polished Bell Face, Rust Proof, Slip-resistant Handle
• Machine Type: 32mm To 300mm
• Type: Dth Hammers
• Country of Origin: India,Made in India
• Export Markets: South Africs

• Warranty: 6 months
• Weight: 14 KG
• Voltage: 230 V
• Country of Origin: Made in India
• Model Name/Number: KPT16DHN
• Brand: KPT

From traditional payment methods to modern ones, we are familiar with all of these payment methods. According to the suitability of patrons, we ensure the payment for an order is done conveniently. Only high-grade packaging material has been used for the safe packing of the products. Thus, we make sure that our customers will get only damage-free products from our end.

• Brand Name: Nityo
• No Load Speed: 2100 to 2400 BPM, 1500 to 1800 BPM
• Air Consumption: <5
• Air Pressure: 50-100 psi
• Air Inlet Size: 1/4", 3/8''
• Piston Stroke: 89 mm
• Packaging Type: Box

• Usage: Personal, Industrial, Garage/Workshop
• Material: Iron and wood

• Application: Industrial, Laboratory
• Hammer Stroke Range: 75 mm
• Measuring Range: 10 to 60 Mpa
• Compressive Strength: 100 to 700 Kg/cm
• Usage/Application: Laboratory
• Brand: XEEPL

• Brand Name: Stanley
• Handle Material: Wooden Handle
• Warranty: 6 months
• Head. Length: 3 inch
• Type Of Hammer: Ball Peen Hammer
• Head Weight: 200 gm
• Head Material: Carbon Iron

• Brand Name: dongcheng
• Warranty: No warranty
• Power Consumption: 900w

• Material: Nylon
• Handle Material: Wooden Handle

3 Mode selector knob Chisel angle locking function Auto cut-off carbon brush Single impact force – 3.1 J Double InsulationHammer ActionForward ReverseVariable Speed

• Usage: Flooring, Insulation, Packaging, Roofing.
• Weight: 0.88 lbs (0.4 kgs)
• Shank Dia.: 23GA., (0.50 x 0.75 mm)
• Crow: 7/16” (10.5 mm)
• Length: 5/32”
• Magazine Cap: 168pcs
• Dimensions: (40 x 28 x 280 mm)

• Handle Material: Wooden Handle
• Features: Easy to use, Everyone can use it easily
• Material: Wooden
• Is It Termite Proof: Yes
• Surface Finish: Polished
• Colour: Brown
• Top Shape: Round

• Handle Material: Wooden Handle
• Net Weight: 100 to 800 g
• Length: 1 to 1.5 Feet

We offer powerful demolition hammer with a high removal rate. Technical data nominal rated input 1.300 watt no-load rate of percussion 1.450 1/min. tool holder hexagon sw 30 mm impact energy – epta-procedure 05/2009 40 joule tool weight 15,0 kg product features keyless chisel support ensures a fast and convenient tool change lockable on-/off switch for permanent operation service cover for carbon brush change additional handle can be swivelled by up to 360° for an optimal working attitude set includes additional handle, carrying case made of steel, pointed chisel 410 mm, lubrication oil 70 ml, 2 hexagon keys (5 and 6 mm) for after-sales service, 24 mm installation wrench for oil basin, 2 carbon brushes noise/vibration information vibration emission level ah / chiseling 15.0 m/s2 uncertainty velue k 1.5 m/s2 sound pressure level lpa 93 db(a) uncertainty velue k 3.0 db(a) sound pressure level lpa 104 db(a) uncertainty velue k 3.0 db(a) lpa = a-rated sound pressure level, lwa = a-rated sound power level k = measurement uncertainty value, ah = triaxial vibration emission level measurement values determined according to en 60745.

• Weight: 2.3 kgs.
• Impact Energy: 1.7 J
• Brand: Bosch
• Model Name/Number: 0 611 258 3F2
• Rated Input Power: 550 W
• Max Drilling Wood: 30 mm
• Rated Impact rate: 0 - 3960
• Rated speed: 0 - 1550 Rpm
• Drilling dia. in concrete with hammer drill bits: 4 - 20 mm
• Max. drilling dia. in mm steel: 13 mm

• Handle Material: Wooden
• Finishing: Coated
• Head Weight: 200 gm
• Brand: Emson
• Material: Stainless Steel
• Usage/Application: Hardware
• Corrosion Resistant: Yes

• Warranty: 6 months
• Brand: KPT

Concrete Test Hammer Often, existing Concrete Test Hammer structures will need to be examined and tested to ensure the concrete remains of adequate strength and durability. Rebound hammer surveys can be conducted to provide a rough estimate of concrete strength, where it is not possible to determine this by more accurate means such as core extraction and testing. The test involves using a special rebound hammer, which measures the recoil of a piston against the concrete surface when a standard force is applied. This recoil can then be correlated appFeatures:• Long working life• Highly durable• Less maintenanceGeneral Descriptions & Specifications :The rebound hammer consists of a barrel in which is housed a hammer mass attached to an impact spring which slides on a guide bar. A plunger is attached to the guide bar which is pressed against the surface to be tested. As the piston is pressed against the surface to be tested, on reaching the compressive strength, the hammer mass is released and rebounds to a certain extent, according to the strength of the surface, which is indicated by a rider on a calibrated scale. A lock button fixed on the body of the hammer lock the rider in place and the rider can be reset to zero Position by using the same button. The equivalent compressive strength can be computed from the chart supplied. It is suitable for specimen of compressive strengths 100-700Kg/cm. The instrument, complete with a grinding stone for polishing the test surface, is supplied in carrying case.

• Brand Name: CP
• Warranty: 6 Months
• Usage/Application: Industrial
• Model Name/Number: CP7111 Air Hammer
• Blow Per Min: 3000
• Min. Hose Size: 10 mm
• Sound Power: 110 db
• Sound Pressure: 99 db
• Length: 171 mm
• Color: Black and Red
• Packaging Type: Box