Hardness Tester Dealers in Pune

• Brand Name: FIE
• Finishing: Chrome Finish
• Power: 1-3 Kw
• Voltage: 220V
• Display Type: Digital
• Model Number: RASNET-3
• Dimension: 450x175x627 mm (LxWxH)
• Automation Grade: Automatic
• Weight: 77 kg
• Major Load: 980.7 kN
• Minor Load: 29.42 kN
• Max Test Height: 230 mm
• Depth of Throat: 133 mm

Vickers Hardness Tester provided by PG Corporation is capable of measuring the hardness of precision metallic parts. The testing range of this Vickers Hardness Tester varies from degrees of hard to soft. The Vickers Hardness Tester is an efficient piece of machinery providing an accurate reading. Testing Range Varies from degrees of hard to soft Features Sturdy designAccurate readingAutomated loading systemBuilt in projection screen

We are offering micro hardness tester -testing force : 1 kg capacity / 2 kg capacity -loading control : automatic (loading, dwell, unloading).

Model - VM 50 Pro   Touch screen Vickers Hardness Tester. Accuracy - 0.1 micron using image processing technology. High accuracy & repeatability. Motorized loading and unloading cycle. Front panel touch screen display.

Principal : Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.   Operation : Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high/low limits, dwell time, auto / manual start, printer selection, scale selection etc. All set data can be verified edited by pressing SCL key one after another.Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading/unloading cycle will be completed and hardness is shown on LCD display with High / Good / Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading / unloading cycle automatically & hardness is shown on LCD Display with High / Good / Low indication.   'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes. This is motorized machine having automatic loading/unloading cycle suitable for production testing.   The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine  looks like new over year. The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is retained for years together due to hardened bush.  A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy. An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia. These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy. IS:1586:2000 for Rockwell and superficial test. IS:2281:2005 for Brinell Hardness Test.   Note : For Brinell scale - manually select (187.5 or 250 kgf) with respected ball indentor. At that time take reference of set point only. Apply the load, then measure the impression dia by Brinell microscope only. (No Brinell scale display on screen).   Optional Accessories : • Steel ball indentor 1/8", 1/4", 1/2". • Testing Table 20mm dia. • Testing Table 70mm dia. with 'V' groove for round jobs 10 to 80mm dia. • Vari-rest to support add shaped jobs. • Jominy test fixture for end quench test. • Gooseneck Adoptor No.1. • Special diamond indentor suitable for Gooseneck Adoptor No.1. • Short nib diamond indentor suitable for Goodseneck Adoptor No.1. • Gooseneck Adoptor No.2.  • Special diamond indentor suitable for Goodseneck Adoptor No.2.• Gooseneck Adoptor No.3. • Raised center testing table 15mm dia. • Diamond Spot Anvil. • Cylindron anvil for testing big jobs above 20mm dia. • Eyeball anvil with 25.4mm dia. or 38mm dia. ball. • Gooseneck anvil for pipes 5 to 25mm ID with 5mm step inserts. • Jack rest for long and heavy jobs.

The instrument is used for periodic calibration of Shore ‘A’ and Shore ‘D’ Rubber Hardness Testers (Durometers).

• Optional Loads: 5 gm, 2 Kg, 3 Kg, 5 Kg
• Accessories supplied with machine: Self centering vice, Thin sheet holder, Wire holder, Level indicator, Lamps, Fuses, Hardness test block
• Test Load: 10,25,50,100, 200, 300, 500, 1000 Gms (10gf to 1000gf)
• Dwell Time: 5 – 95 seconds settable
• Objectives: 10X for scanning and 40X for measurement. (Plan Achromatic)
• Loading and Unloading: Motorized loading and releasing
• Indexing: Manual rotating turret for indenter and objectives
• Hardness measurement: By diagonal measurement with Digital filler micrometer eyepiece with 0.025micron accuracy (magnification 10X)
• Test Table: 100mm x 100mm size with 25 mm movement in X – Y direction with micrometer head
• Operation Panel: LCD Touch Screen Panel to operate Turret movement for setting indenter and objectives, setting dwell time and intensity, loading, dwell & unloading indication, display of diagonal length and hardness value, HV/HK options

• Display Type: Analog
• Model Number: VM-50
• Brand Name: FIE
• Voltage: 220 V
• Frequency: 50 Hz
• Material: SS
• Finishing: Powder Coated
• Dimension: L 585 x W 290 x H 860 mm
• Weight: 70 kg
• Power Source: Electric
• Test Loads: 5, 10, 20, 30, 50 kgf
• Optical Magnification: 70 X
• Optical Measuring Range (mm): 0.1 to 1.0
• Maximum Test Height (mm): 200
• Scale Least Count (mm): 0.001
• Throat Depth (mm): 135
• Phase: Single Phase

• Display Type: Analog
• Type: Single Needle
• Measurement Range: 0-100HA(HD)
• Automation Grade: Automatic
• I Deal In: New Only
• Test Scale: Shore Hardness A

• Voltage: 220 V
• Display Type: Digital
• Parameter: HRC
• Brand Name: Shri Laxmi Venkateshwar Enterprises
• Automation Grade: Automatic

We have range of micro hardness testers as per the customers requirement.

We are offering computerised brinell hardness tester. Vmc' computerised brinell hardness tester is a simple and a accurate means to produce brinell impression and automatically measure it. The tester gives direct display of brinell hardness number. These testers are suitable for measuring the hardness of metallic parts with wide leading range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly confirm to is : 2281, bs : 10003-2 and astm e-10 technical data total load kgf : 500 to 3000 in stages of 250 kgfmeasurement range : 1-6 mmmax. Test height : 410 mmscale least count : 0.01 mmthroat depth : 200 mmmachine dimension (approx.) mm : l 995 x w 400 x h 1178weight (approx.) :  450power supply v/cy/ph : 415/50/3 the software includes facility for auto / semi auto / manual modes of operation well managed database saves readings w.r.t. Batch and certificatereport generation in the form of certificate and graph with variation and histogramfacility for calibration and check of calibrationadvance image processing algorithm implemented for automatic measurementstatistical data is provided for a batch results and include standard deviation, mean, medium, minimum and maximum readingmeasuring scale calibration / verification on pc monitor pc requirements 2 gigahertz (ghz) or faster processor1 gigabyte (gb) ram minimummicrosoft windows 7/vista/xp operating systemdisplay screen resolution minimum 1024 by 768 pixelstwo free usb 2.0 ports standard accessories testing table 200 mm dia : 1 pc.testing table 70 mm dia with "v" groove for round jobs 10 to 80 mm dia. 1 pc.ball holder 5 mm : 1 pc.ball holder 10 mm : 1 pc.test block hb-5/750 : 1 pc.test block hb-10/3000 : 1 pc.allen spanner : 4 pcs.telescopic cover for elevating screw protection : 1 set.electric cord & pc interface cord : 1 no. Eachusb video capture : 1 no.interface box : 1 no.software cd : 1 no.instruction manual : 1 book

UCI Hardness Tester is designed for rapid non-destructive testing of hardness.Metals and alloys on standardized international scales of hardness: Rockwell (HRC), Brinell (HB), Vickers (HV); The ultrasonic contact impedance (UCI) probe is used for measuring the hardness of small items, objects with a thin wall, complex form, and to measure the hardness of surface hardened layers. Measurement hardness range: Rockwell, HRC - 20 - 70 Brinell, HB - 90 - 450 Vickers, HV - 230 - 940   Standard set of UCI Hardness Tester Electronic block UCI probe 2 batteries AA Charger USB cables Operating manual Software for PC Case   Measuring the hardness of the surface hardened layer Possibility to use in field conditions with high humidity and dust Convenience and ease of measurement Optimized number of buttons Contrast display with bright back-lighting Automatic recognition of probe Indication of the type of connected probe Calibrations stored in memory of probe Very easy in operation and calibration Internal memory and communication with PC Rubber bumper protected case

The Rockwell Brinell scale is a hardness scale based on the indentation hardness of a material. The Rockwell Brinell test determines the hardness by measuring the depth of penetration of an indenter under a large load compared to the penetration made by a preload. There are different scales, which are denoted by a single letter, that use different loads or indenters. The result, which is a dimensionless number, is noted by HRX where X is the scale letter. When testing metals, indentation hardness correlates linearly with tensile strength. This important relation permits economically important nondestructive testing of bulk metal deliveries with lightweight, even portable equipment, such as hand-held Rockwell Brinell hardness testers.

The Rockwell scale is a hardness scale based on indentation hardness of a material. The Rockwell test determines the hardness by measuring the depth of penetration of an indenter under a large load compared to the penetration made by a preload.[1] There are different scales, denoted by a single letter, that use different loads or indenters. The result is a dimensionless number noted as HRA, HRB, HRC, etc.,

• Loads: 500- to 3000Kgf
• Maximum Test Height: 410 mm

Micro Vickers Hardness Testers in design, It is Suitable for measuring the hardness of precision metallic parts with wide testing range. Wide testing range, from soft metal such as lead, up to the hardest, like hardened steel.Same Hardness number is obtained on the same specimen.

• Brand Name: Metrix Plus
• Place of Origin: Maharashtra, India
• Supply Ability: 1000 Piece/Pieces per Month
• Port: Nhava Sheva, Mumbai

• Parameter: HB
• Display Type: Analog
• Material: Mild Steel
• Packaging Type: Box
• Usage: Hardness Testing
• Weight: 100 - 250 g
• Measuring Range: 30 - 60 HRC
• Brand: Vision Enterprises

• Type: Hardness Tester
• Color: Grey, Sky Blue
• Specialities: Easy To Use, Electrical Porcelain, Proper Working, Water Proof, High Strength
• Warranty: 1year, 2years
• Usage: Industrial
• Condition: New

• Automation Grade: Automatic
• Weight: 1-2 kg
• Scratch Speed: 1 Mm/sec
• Pressure of Pencil Tip: 1000/750/500g

• Warranty: 1-2-5 yrs
• Color: Green ,Grey ,Light Green , Multicolor , Sky Blue
• Specialities: Easy To Use, Electrical Porcelain, Four Times Stronger , Proper Working Waterproof
• Frequency: 50Hz, 60Hz
• Driven Type: Battery,Electric
• Condition: New,Used

• Brand: Insize
• Display Type: Analog
• Weight: 160g
• Measuring Range: 10-90HA
• Product Code: ISH-SA
• Dimensions: 115x60x25mm
• Indenter Protrusion: 2.5mm
• Graduation: 1HA
•  :  

• Parameter: HRC
• Display Type: Digital
• Accuracy: +/- 6 HLD
• PC Connection: USB
• Model Name/Number: Portable Hardness Tester
• Tensile Strength: 374 to 2652 Nm per sq
• Battery charger: 3 V

• Dwel time: 5 - 60 sec
• Test Table: 100 x 100 mm

Load range - 10 gmf - 1000 gmf, Loading unloading - Automatic, Dwel time - 5 - 60 sec., Magnifications - 100 X & 400 X, Measurement - 175 microns Manual, Specimen height - 65 mm, Test Table - 100 x 100 mm.

Micro Vickers Hardness Tester, hardness testing machines, hardness tester

Rubber Hardness Tester, electronic tensometer, piston ring tester