Hardness Testing Machine Dealers in Kalewadi, Pune

• Type: Hardness Testing Machine
• Voltage: 110V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 2years
• Application: Industrial
• Automatic Grade: Automatic

With the aid of diligent professionals and smart packaging system, we can easily render bulk and customized packaging requirements of the patrons. Also, we ensure that the packed lot has shock sustainability to circumvent loss during transit. We ensure that the products will remain in a safe condition and for this; we have hired experts who keep a strict vigilance on the entire unit. Moreover, our unit is timely upgraded ensuring more safety.

Principal : Rockwell, Rockwell superficial & Rockwell cum Brinell tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force and then measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement of hardness value.RASNE series machines are suitable for Rockwell, Rockwell superficial & Rockwell cum Brinell tests. These are motorized digital Hardness testers having LCD display for easy hardness measurement. The results are displayed in 0.1 Rockwell unit for more accurate measurement.   Operation : Various parameters of test can be set on front panel by operation of key board and observing LCD display Viz high/low limits, dwell time, auto / manual start, printer selection, scale selection etc. All set data can be verified edited by pressing SCL key one after another.Machine operation is very simple. The normal mode is a bar followed by "SET" indication. Raise elevating screw slowly through bar indication till "SET" position which will show "PRESS START" indication. Now press "START" button. Loading/unloading cycle will be completed and hardness is shown on LCD display with High / Good / Low indication. Lower down elevating screw. Panel will show normal mode for next test. Also when required 'AUTO START' on front panel by operation of key board & observing LCD Display then raise elevating screw slowly through bar indication till "SET" position then it will starts loading / unloading cycle automatically & hardness is shown on LCD Display with High / Good / Low indication.   'RASNE' series of Hardness Testing Machines come with much improved design & look with following major design changes. This is motorized machine having automatic loading/unloading cycle suitable for production testing.   The machine body is having a taper front look and a large size read-out in the front. The machine is powder coated for better look. The paint shade do not fade and machine  looks like new over year. The elevating screw of machine is guided in a hardened and ground bush, not allowing movement of elevating screw more than 0.05 mm when raised to full height. The accessory is retained for years together due to hardened bush.  A hardened and ground stepped bush is fixed on top of main screw for location and rest surface. This guarantees no change in results due to rough handling of test table or test piece. It means a trouble free long life machine accuracy. An antifriction linear bearing with almost no clearance is provided for a perfect vertical movement of loading plunger with minimum friction. This enables testing of small dia. Pin or ball upto 3 mm dia. These models are provided with automatic working cycle and digital LCD display with 0.1 Rockwell resolution. This insures productivity with better accuracy. IS:1586:2000 for Rockwell and superficial test. IS:2281:2005 for Brinell Hardness Test.   Note : For Brinell scale - manually select (187.5 or 250 kgf) with respected ball indentor. At that time take reference of set point only. Apply the load, then measure the impression dia by Brinell microscope only. (No Brinell scale display on screen).   Optional Accessories : • Steel ball indentor 1/8", 1/4", 1/2". • Testing Table 20mm dia. • Testing Table 70mm dia. with 'V' groove for round jobs 10 to 80mm dia. • Vari-rest to support add shaped jobs. • Jominy test fixture for end quench test. • Gooseneck Adoptor No.1. • Special diamond indentor suitable for Gooseneck Adoptor No.1. • Short nib diamond indentor suitable for Goodseneck Adoptor No.1. • Gooseneck Adoptor No.2.  • Special diamond indentor suitable for Goodseneck Adoptor No.2.• Gooseneck Adoptor No.3. • Raised center testing table 15mm dia. • Diamond Spot Anvil. • Cylindron anvil for testing big jobs above 20mm dia. • Eyeball anvil with 25.4mm dia. or 38mm dia. ball. • Gooseneck anvil for pipes 5 to 25mm ID with 5mm step inserts. • Jack rest for long and heavy jobs.

Clients can avail from us Brinell Hardness Testing Machine that is used to assess hardness of soft alloys and casting forgings. The Brinell Hardness Testing Machines are also used for production testing. In the making of Brinell Hardness Testing Machine, we utilize the modern technologies. Besides, the material used in the making of Brinell Hardness Testing Machine is acquired from industrys best vendors. Details : Hardness Testers, Model B-3000 (H) & Model B-3000 (O) are precision engineered confirming to IS:2281:1968, BS:240 and ASTM:E 10, however B-3000 (H) & Model 3000 (O) are most suitable for production testing. These machines are designed to measure hardness of castings, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape.

hardness testing machines, hardness tester, Micro Vickers Hardness Tester