Heating Components Dealers in Chakan, Pune

We offer highly efficient Thermic Fluid Heater that smoothly operates on a wide range of fuels. Our Thermic Fluid Heater is available in versions, i.e., solid fuel firing and oil or gas firing so that the user can reap the advantage of economically available fuels. All Thermic Fluid Heaters are made by using a coil type design that ensures instant heat. To run Thermic Fluid Heater, we provide various fuel options like light oil, heavy oil, dual fuel, gas, coal, wood, bagasse, husk, and other agro-waste fuels. Highlights : Sturdy construction Highly durable Smooth performance Low maintenance Special Features : High capacity heating system Multi-fuel option � heavy oils, light oils and gases Rugged - requires very little maintenance Over-bed & under-bed fuel firing systems can be incorporated Large in-bed and convective heat transfer area Product Range : Capacities : From 0.1 million kcal/hr to 12.0 million kcal/hr Temperature : Up to 3850C Firing fuels : Heavy oils, light oils and gases Efficiency : Overall efficiency of 85 % + 2% on NCV Solid fuel fired Thermic fluid heaters

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.

The company is one of the well-known Suppliers of Air Cooled Pump Sets in Pune (India). The Air Cooled Pump Sets, offered by the company, are used for a wide range of applications ranging from agriculture to domestic water supply. The Air Cooled Pump Sets are available with the cylinder flanges and can be availed at reasonable prices. Features Of Air Cooled Pump Sets : Vertical designing4 stroke cycleTotally enclosedHigh speedCompression ignition diesel engine

Ceramic Heater Plate, Inert Ceramic Ball, alumina ceramic

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.These models are designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.

water heating components, Water Heater, Solar Water Heater

M.E Energy makes coil type Thermic fluid heaters for high temperature applications typically above 300 deg C. Our Thermic Fluid Heaters are supplied as an integrated system inclusive of accessories like Pumps, Valves, Combustion System, Chimney etc . The systems can be configured to meet the customer’s requirements like specified makes of Pumps or Burners etc. or installed within a given space availability.  Thermic fluid Heater are available in multiple fuels such as solid / gas / liquid.  Thermic Fluid heater range from 100000 kcal/hr to 6000000 kcal/hr.

• Type: Billet Heating Furnace
• Material: Mild Steel, Stainless Steel
• Application: Industrial
• Certification: CE Certified
• Application: Automobile Industries
• Feature: Digital Display, Energy Regulator, Temperature Control
• Voltage: 110V, 220V, 380V, 440 V
• Condition: New, Used
• Power Source: Electric
• Warranty: 1 Yr, 2 Yrs

Thermin Power provides coil type efficient Thermic Fluid Heaters. Oil / Gas / Dual Fired Systems are available with us.

• Material: Mild Steel
• Usage/Application: Industrial
• Tank Capacity: 500 L
• Voltage V: 240 V
• Power: 5,814 kW
• Surface: Coated
• Power Source: fuel oil, gas
• Min Power: 466 kW

• Feature: Easy to use,High temperature,Abrasion resistant

We are the leading manufacturers, exporters and supplier of this products.

• Finishing: Powder Coated
• Shape: Round
• Color: Metallic
• Feature: Perfect finish, Sturdy design, High tensile strength, Compactness, Rigid structure, Efficient working.

• Fuel: Solid Fuel, LDO, FO, LSHS, Agrowaste Etc.
• Wide Range :: 1,00,000 to 50,00,000 Kcal/Hr.

Horizontal Type Oil/Gas Fired Thermic Fluid Heaters. High performance elevated temperature Hot Oil Heaters for- process heating applications at !ow operating pressure. Designed with field- proven safety features, these heaters provide round the clock, trouble-free process heating in a wide variety of industrial application. At high "temperature, water and steam requires a corresponding high operating pressure. Establishing this with water and steam can be very difficult and expensive. In thermic fluid heaters a thermal oil is wed instead as the heat carrier operating at low pressure to deliver 300ﾂｰC temperature. In comparison water and steam, would require a pressure of 85 bar to obtain this temperature. The SU-Series thermic fluid heaters are thermodynamically optimized and are characterized by high efficiency & excellent heat transfer to the thermic fluid. The combustion chambers are generously dimensioned & are sufficiently long. The flame can thus burn fully & the emission values remain very low for ail fuel types.Salient Features of the SU Series - Oil/Gas Fired Thermic Fluid Heaters are Large heating surface area hence higher efficiency Hinged front door for easy cleaning and inspection Rugged construction Maximum running reliability Advantages of using Thermic Fluid Heaters Over Steam Boilers High temperature up to 300ﾃつｰC at low pressure of I to 3 bar No equipment for pre-treatment of boiler feed wafer No heat loss due to hot condensate and flash steam discharge No risk of corrosion Low maintenance costs Easy to operate (does not require a steam boiler certified operator)   Vertical Type Oil/Gas Fired Thermic Fluid Heaters. SU series heaters are compact, vertical, factory-assembled fired equipment for high temp, closed loop thermal oil process heat applications. Synthetic or mineral based thermal oils having stable properties over a wide temp range of 10 to 300ﾂｰC are used as heating medium at comparatively [ow operating pressure of 3-4 kg/ cm. SU series TF Heaters are fitted with indigenous pre-heated air burners in three-pass combustion system to improve thermal efficiency. These heaters are fitted with standardized components and are quite simple to operate and maintain. A large number of options, such as choice of fuel, addition of standby TF pump, sizing of de-aerator tank are available to users to meet their process needs. 4 Pass Solid Fuel Fired Thermic Fluid Heaters. Larger, more efficient 4-pass designs are manufactured in capacity range of 400,000 to 4,000,000 kcal/hr, in which the heat exchanger is split in two vertical sections; the radiant section installed above the furnace & the convection section installed next to it and connected with a refractory lined flue duct. Although, this design takes up a large floor space, it is more efficient and well planned for thermal expansion. The vertical design with integral furnace assures rated output on any sold fuel like coal, wood & bagasse. The well-planned design of the SU-Series ensures thermal expansion with low stress. Salient Features of the SU Series - 4 Pass Solid Fuel Fired Thermic Fluid Heaters are Low operating cost Reliable operation Safety against low thermic fluid flow Precise thermic fluid temperature control   Applications Agro Industries Chemical & Petrochemical Industry Food & Beverages Laundry & Dry Cleaning Textile Concrete Blocks Curing Dairy Drugs & Pharmaceuticals Batteries Coir Engineering Educational Institutes Electric Cables Hotels, Hospitals Leather Paper/ Packaging/ Plywood/ Thermocole Research & Development Tea/ Tobacco/ Timber/ Wood/ Toys/ Wool/ Silk

• Material: Fibre Glass
• Size: 1 meter to 5 meters
• Brand Name: Sensoheat
• Compatible Power: 230VAC
• Frequency Hz: 50
• Thickness: 1-15 mm
• Maximum Exposure Temperature: 200degC

Mica insulated heaters operate best and provide the longest life when the sheath temperatures are held below 250oC. Applications Plastic processing Machinery. Injection and Blow Molding. Extruders. Many other Applications. (Medical, Lab-quipments…etc) Features Rust resistant Sheath. Top quality Nickel Chrome ribbon. Max. 25 watts per sq. Inch. Max. Operating temperature up to 250oC

Drying System, shear mixer, Multi Mill, High Shear Mixers

SS Geyser Heater Plate

Heat Pumps, Food Processing Equipment, Power Floater Machine

water heating components, Wind Mills, Wind Turbines, SOLAR SYSTEMS