Heatless Air Dryer Dealers in Pune

• Brand Name: Drytech
• Residual Oil: Upto 0.1 PPM
• Range: Upto 1140 SCFM flow
• Pressure: 10 Kg / cm2
• Moisture: (-)40 / (-)700C Atm. Dew Point
• Dust: 5 u
• Application: To various engineering applications where atmospheric dew point is preferred (-) 40 °C and above.

The presence of oil, moisture and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer or international Standard Organisation (ISO) or Pneurope recommendation has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine uptime, lower rejections, better product quality and above all considerable saving in energy.Drytech Air Drying Unit - HD series (Heatless) type offers quality class of air desired as per various recommendations for different pneumatic applications. The stationary air drying unit with negligible maintenance, lesser operating cost and longer service life is the right selection for pneumatically operated machines which needs purified compressed air.Salient Features Operating on ADSORP principle; Hence prevents entrainment of moisture in the pipe line however long is may be The most compact skid mounted unit supplied in READY FOR USE state by connecting compressed air at inlet and outlet The stationary working system and requires negligible maintenance Assured atmospheric dew point equal to (-) 40 deg. C. or (-) 70 deg C as required Ideal purging as per desiccant manufacturers instruction for regeneration Lesser pressure drop in total unit Modified purge silencer causing less noise Designed for Indian atmospheric condition Easy for installation and commissioning Sequence of Drying Operation : It is as per following three stagesPrefiltration : The dust particles, condensed oil and moisture in liquid droplets and aerosol from is per-filtered by set of pre-fine filter combination, The Compressed air with only vapourised from of moisture is permitted to enter the desiccant bed tower.Drying : The Saturated Compressed air is dried in desiccant bed tower.Postfiltration : The dry compressed air is refiltered in after filter for removal of residual fine particles if any.Operation : The complete ADU operates in following three modes.Drying Mode : The wet saturated compressed air coming from set of pre filters is led through one of the inlet valve (Operated by electronic timer) to the desiccant bed tower. The highly hygroscopic desiccant bed with sufficient air resident time due to proper velocity results in absorbing the moisture vapour and dries the air to desired level of dew point.Regeneration Mode : The small amount of dried air at almost atmospheric pressure is led through purge line to the saturated desiccant bed tower. The absorbed moisture in desiccant bed at earlier drying mode is desorbed in purged dry air and regeneration takes place.Pressurisation Mode : To avoid the pressure fluctuations at outlet of dryer, the regeneration mode tower is put in for pressurisation before it switches to drying mode. The entire operation is electronic timer controlled and automatic at various modes shown above for proper sequence and timing. The total cycle time is 10 minutes or 4 minutes as per timer selection for required dew point.

Heat less dryer works on the principal of absorption. Regenerative air dryers use desiccant media absorbs moisture contaminate from compressed air. The desiccant media can be regenerated by purging air and remove moisture it collect and remove again and again. So the dryness of the compressed air achieved up to atmospheric -40'c dew point. The traditional refrigeration type air dryer does not provide sufficient air quality required for special applications. Guru regeneration heat less dryer contains smooth uniform achieved alumina balls size tat prevents channeling of compressed air flow, which maintains low bed velocities. This maintains air contact time for efficient moisture removal and minimal pressure drops. Guru have electronic control timer for pneumatically pilot valves are chosen for long life and high air flow. A pre filter, oil removing filter, after filter offering purification to 5 micron can be specified purge loss and pressure drop are kept at a minimum resulting in lower operating costs.

The presence of oil, moisture and dust particles in compressed air is a well known fact for industrial applications. As the technology advanced with inducation of sophisticated modern machineries working on compressed air, the usage of recommended quality class of air as per machines manufacturer or international Standard Organisation (ISO) or Pneurope recommendation has become necessary. The usage of filtered, dry air as per above recommendations results in reduced wear and tear, increased machine uptime, lower rejections, better product quality and above all considerable saving in energy. Drytech Air Drying Unit-HD series (Heatless) type offers quality class of air desired as per various recommendations for different pneumatic applications. The stationary air drying unit with negligible maintenance, lesser operating cost and longer service life is the right selection for pneumatically operated machines which needs purified compressed air.   Salient Features :•  Operating on ADSORP principle; Hence prevents entrainment of moisture in the pipe line however     long is may be.•  The most compact skid mounted unit supplied in READY FOR USE state by connecting compressed     air at inlet and outlet.•  The stationary working system and requires negligible maintenance.•  Assured atmospheric dew point equal to (-) 40 deg. C. or (-) 70 deg C as required.•  Ideal purging as per desiccant manufacturers instruction for regeneration.•  Lesser pressure drop in total unit.•  Modified purge silencer causing less noise.•  Designed for Indian atmospheric condition.•  Easy for installation and commissioning.Sequence of Drying Operation.It is as per following three stagesPrefiltration :The dust particles, condensed oil and moisture in liquid droplets and aerosol from is per-filtered by set of pre-fine filter combination, The Compressed air with only vapourised from of moisture is permitted to enter the desiccant bed tower.Drying :The Saturated Compressed air is dried in desiccant bed tower.Postfiltration :The dry compressed air is refiltered in after filter for removal of residual fine particles if any.   Heatless Air Dryers   Mini Dryer   Request a Quote     Operation :The complete ADU operates in following three modes.Drying Mode :The wet saturated compressed air coming from set of pre filters is led through one of the inlet valve (Operated by electronic timer) to the desiccant bed tower. The highly hygroscopic desiccant bed with sufficient air resident time due to proper velocity results in absorbing the moisture vapour and dries the air to desired level of dew point.Regeneration Mode :The small amount of dried air at almost atmospheric pressure is led through purge line to the saturated desiccant bed tower. The absorbed moisture in desiccant bed at earlier drying mode is desorbed in purged dry air and regeneration takes place.Pressurisation Mode :To avoid the pressure fluctuations at outlet of dryer, the regeneration mode tower is put in for pressurisation before it switches to drying mode. The entire operation is electronic timer controlled and automatic at various modes shown above for proper sequence and timing. The total cycle time is 10 minutes or 4 minutes as per timer selection for required dew point.

It contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminates the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system. Our Air Dryers remove the moisture to a level of 80 ppm(w) by using pressure swing adsorption technology. The wet air enters into one desiccant tower and gets dried by the high performance desiccant adsorbent. The dry air passes through check valves and post filter to the utility. A portion of dry air (depending on the operating pressure and required dew point temperature) passes through an orifice into the other saturated tower at near atmospheric pressure, liberates the entrapped moisture in the desiccant to the atmosphere and regenerates it for the next drying cycle. A reliable electronic timer controls the cycle and valve operations effectively thereby ensures continuous dry air output to the utility. Features: Proven trouble free valve design Rugged carbon steel construction Integerated pre & post filters Easy and flexible installation Simple maintenance Outlet air quality according to ISO 8573-1,Table 3,Class 2 & 3 Operating Range: Capacity: 100 to 10000 m³/hr Inlet air pressure 4 to 70 bar g Inlet air temperature: 10 to 60°C Pressure Dewpoint temperature -20 & -40°C Applications: Plant Air Painting process CNC Machines Hospitals Food & processing Textiles Leather Industry Automobile Industies

• Type: Air Dryer
• Max Temperature: 45Degree
• Automatic Grade: Automatic
• Design: Customized

We offer our clients an array of Heatless Air Dryer that is extremely effective in removing the heat and exhaust emitted from the machines or other equipment in the work area. Applicable in various industries, these heatless air dryers not only remove heat from the atmosphere but also facilitate in making the air moisture free. Feature : Oil removing filter Pre-filter After filter Fittings time

We offer our clients an array of Heatless Air Dryers that are extremely effective in removing the heat and exhaust emitted from the machines or other equipment in the work area. Applicable in various industries, these heatless air dryers not only remove heat from the atmosphere but also facilitate in making the air moisture free. Technical specifications: Our range of heatless air dryers consists of the following parts: * Oil removing filter * Pre-filter * After filter * Fittings time

Heatless Air Dryer, Refrigerated Air Dryers, Refrigeration Air Dryer

Heatless Air Dryer, Driven Robot, Stainless Steel Oil Heater, Drum Flaker

HEAT LESS AIR DRYER, Oxygen Generators, Nitrogen Generators, gas systems