HVAC System Dealers in Dighi, Pune

We are the leading manufacturer and supplier of the best quality range of Air Handling Unit. The handling unit provided by us is manufactured using the top most quality components and innovative technology under the vigilance of our dexterous professionals. Our offered handling unit is used to circulate and regulate air as part of a ventilating, heating and air-conditioning system. Apart from this, the offered handling unit is rigorously tested by our quality controllers on various quality parameters in order to deliver a flawless range at patron's end. Features: Precisely designed Long functional life Minimum maintenance

• Size: 0-20mm, 20-40mm, 40-60mm
• Type: Rubber Damper
• Material: Neoprene Rubber, Silicon Rubber
• Diameter: 0-10cm, 10-20cm, 20-30cm, 30-40cm, 40-50cm, 50-60cm, 60-70cm, 70-80cm
• Shape: Round
• Thickness: 0-5mm, 10-15mm, 5-10mm
• Application: Automobiles Fittings, Wheel Fittings
• Color: Black-grey, Grey, Silver, White
• Surface Finishing: Polished, Power Coated
• Feature: Corrosion Resistance, Dimensional, Hardend & Temper, High Quality, High Tensile
• Certfication: ISI Certified, ISO 9001:2008 Certified

• Pressure: Medium Pressure
• Power Supply: 220V
• Size: Multisizes
• Certificate: CE Certified
• Type: Damper Actuator
• Structure: Angle
• Country of Origin: Japan
• Temperature Of Media: Medium Temperature

These are products from Azbil Japan, functional equivalent to Honeywell M7284/M7294/M6284/M9494 Series Mod motors Used for valves and Damper actuation.

We are a prevalent Manufacturer and Supplier of Bypass Damper in Maharashtra, India. The bypass damper is used in between heat exchanger and bag filter. If the gas is not suitable to go into the bag filter for any cause, then there must be a way to put the gas out to the chimney, to protect the filter bags. Because the filter bags are made to persist a certain temperature, if that exceeds, the bags may get damaged. The suitability of the gas depends on the temperature of the gas. If the gas becomes low or high from a certain temperature then we use the bypass damper to bypass the gas.

We have parted our infrastructure into several units and one of them is warehouse wherein we keep a huge stock for furnishing urgent and quick requirements of the clients. Our organization has observed impressive rise as Fan Filter Unit supplier, courtesy our ability to fulfill to wholesale demands without hassle.

• Usage/Application: Industrial Use
• Type: Floor Mounted
• Brand Name: Drainfett
• Capacity: C250
• Material: Aluminium
• Color: Grey
• Size: 900x450mm
• Country of Origin: Made In India

Demech has started manufacturing of Industrial Flue gas dampers and having state-of-art manufacturing facility. Demech has manufactured industrial dampers for power plant, gas based and diesel generation based power plants, waste heat recovery system in cement plant etc. applications. Technical Details

• FEATURES: Modular Design to change layouts Low Height & Weight. Air Tight Performance Low Noise & Vibration

Fan Filter Unit(FFU) is air cleaning equipment to supply purified air to the clean room for manufacturing electronics components, food products, pharmaceuticals , health care or any precision engineering products .The installation space is the system ceiling grid. For a large clean room, a large number of FFU are required depending upon class of cleanliness.

We are offering bus duct. The products that we design and develop are widely used by various industries. All kinds of bus ducts are made available on the requirement of the clients presenting a range of bus ducts and rising mains that are available upto 4000 a, which can be operated with less than 35 degree celsius temperature rise over an ambient of 40 degree celsius. Their short circuit withstands capacity falls at 50ka. The non-segregated bus ducts with inter leaving design are aptly designed for indoor and outdoor installation with ip: 55 degree of protection. Send enquiry

• Blower Type: Centrifugal Blower
• Power Source: Electric Blower
• Pressure: Medium Pressure
• Usages: Industrial

• Surface Treatment: polyester coating, standard white
• Panel section: 84 x 16 mm, thickness 0.6 mm
• Features: Fine finish , High strength , Weather proof .

Fan Filter Unit(FFU) is air cleaning equipment to supply purified air to the clean room for manufacturing electronics components, food products, pharmaceuticals , health care or any precision engineering products .The installation space is the system ceiling grid. For a large clean room, a large number of FFU are required depending upon class of cleanliness.  FEATURES Modular Design to change layouts Low Height & Weight. Air Tight Performance Low Noise & Vibration Ductable Design Cost optimization HEPA and ULPA filters (Mostly minipleat) Choose either a HEPA Filter 99.99% eff. @ 0.3 micron or ULPA Filter 99.9995% eff. @ 0.12 Micron filters Various optional accessories like prefilter Diffusion plate,pressure gauge Group control management system Fixed speed or variable speed control Horizontal flow table unit CONSTRUCTION: Envair Fan Filter Units are self-contained, motorized Supply Air Modules equipped with either HEPA or ULPA filters. Envair FFU's can be used in either horizontal or vertical flow positions, wherever clean air is needed.They are designed for easy connection to the building power & Air Handelling system and are equipped with a pre-filter, four clips located at all corners for providing strong suspension points.Housings are fabricated from 18-gauge steel with a white powder coat finish or thermoformed plastic or GI or aluminum or stainless steel. Envair FFU are Tested as per Std. ISO �?14644 & US FED STD.209

We are offering bus duct the products that we design and develop are widely used by various industries. All kinds of bus ducts are made available on the requirement of the clients presenting a range of bus ducts and rising mains that are available up to 4000 a, which can be operated with less than 35 degree celsius temperature rise over an ambient of 40 degree celsius. Their short circuit withstands capacity falls at 50ka. The non-segregated bus ducts with inter leaving design are aptly designed for indoor and outdoor installation with ip: 55 degree of protection. Send inquiry.

FRP Duct Manufacturers process can be implemented for various types of business industries applications. We are currently engaged in various types of (FRP) products. FRP Duct Manufacturers products are erosion safe • Low upkeep • FRP Duct Manufacturers products carrying release sealing features • Long postings • Long item life • Simple to handle • Less working worth • Very tough • Blunder free execution • Generally Reliable

FORBES MARSHALL ARCA control valves and actuators are designed to cater to a variety of industrial control applications like steam, liquids and gases. Forbes Marshall control valves are modular in design and versatile in construction.

• Features: Maintenance-free High efficiency Reliability

Backed by consistent efforts of our dexterous professionals, we are engaged in offering an optimum quality Air Handling Unit. The offered unit is used for conditioning and circulating air as a part of the air-conditioning system. This unit also comes with effective controlling units that help in the proper control of the system. These units are fabricated using to notch components and ultra-modern techniques to cater to the diversified requirements of our esteemed clients. Further, we offer these at market leading price.

• Size: 1.1/2inch, 1.1/4inch, 1/2inch, 1inch, 2inch, 3/4inch, 4/5inch, 5/6inch, 6/7inch
• Type: Air Vents
• Material: Carbon Steel, Metal, Stainless Steel
• Application: Mechanical Industry
• Color: Metallic, Shiny-silver, Silver
• Pattern: Dotted, Plain, Printed
• Condition: New, Used
• Pressure: 0-50Deg C, 100-200Deg C, 50-100Deg C, High Pressure, Low Pressure
• Feature: Blow-Out-Proof, Casting Approved, Durable, Easy Maintenance., Investment Casting, Smooth Finish And Robust Design
• Automation Grade: Automatic, Manual

• Thickness: 4-25 Mm
• Color: Black
• Country of Origin: Made in India
• Brand Name: Fairdeal Rubber
• Features: Low maintenance, Compact size, Easy to use, Optimum strength, Precise dimension, Perfect design
• Packaging Type: Packet

GI Ducting – Galvanized Iron Ducting   Ducts are passage or conduits used in HVAC to deliver or to remove air. We Can use these ducts as supply air, return air and exhaust air. We can insure acceptable indoor air quality and thermal comfort with the help of duct. These are galvanized iron ducts and aluminum ducts.

We have a great track record in innovation and long term relationships with clients factors which bring about great projects as well recurring clients year after year. Quality is our buzzword and we confer to high standards of accountability.....

• Voltage: 230 V AC
• Structure: Butterfly
• Material: Stainless Steel
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Nominal voltage frequency: 50/60Hz
• Actuator Type: Electric Actuator, Linear Actuator, Pneumatic Actuator

hvac systems, Scrubbers, rubber hoods, Paint Booths, flash diffusers

Ventilator Installation Services, Ventilation System Audit Services

It is a replica of the stream of mechanical engineering based on the dynamics of thermodynamics, fluid engineering as well as fluid mechanics. Heating, ventilation and air conditioning falls under the umbrella of HVAC and in core aspects it could be referred to as the technology of the indoor and automotive industrial comforts.

air showers filters, Fume Hoods, laboratory workstation

Vibration Dampers, escalator bearing rollers, castor wheels pads

Butterfly Damper, Guillotine Damper, louver damper