Hydraulic Machine Dealers in Kothrud, Pune

• Condition: Good
• Product Name: Hydraulic Power Press
• Range: CNC/Automatic high speed power presses : 12ton to 120tons
• C frame flywheel presses: 10ton to 75tons
• Feature: high speed, with low maintenance and high performance. It is offered at nominal prices.
• Place Of Origin: Pune

We offer clients a wide gamut of Hydraulic Power Press of both C-frame and H-frame types. It is sourced from trustworthy vendors of the market who manufacture it using premium raw material. Our Hydraulic Power Press comes in different capacities ranging from 10ton to 500 metric tons. Additionally, Hydraulic Power Press runs on high speed, with low maintenance and high performance. It is offered at nominal prices.Range  : CNC/Automatic high speed power presses : 12ton to 120tons C frame with air clutch C frame flywheel presses : 10ton to 75tons C frame back geared presses : 50ton to 450tons H frame with single and double connecting rod Straight side presses with single and double connecting rod : 50ton to 500tons   Information : Crankshaft and Pitman running on roller bearings with fixed stroke Ram with backlash-free pre-loaded linear roller bearing guides, Air friction clutch with friction brake for short stopping distances andminimal stopping time. Minimal air consumption; Noise muffler on clutch exhaust. Drive and clutch are enclosed in sound dampeners and operate quietly, noise level under 85 dB(A) (measured after DIN 45 635) without tooling; Air service unit (lubricator - heavy duty filter - regulator); Air pressure control unit, adjustable, with emergency stop in case of insufficient air pressure; Flywheel rotation detector for set-ups; Machine bed with cross T-slots T 14 to DIN Machine base Interlocked Press Barrier guard. Infinitely variable controllable drive via frequency controlled three-phase AC motor for press speeds of 100 - 600 strokes/min. Mabu mPC-10 Electronic Press Control in a compact console, 4 line display for clear text information; incl. fully automatic TDC cut-off, operating hours counter, 2 programmable counters and 3-fold cam switching system. Operating modes: 0 – MANUAL SETTING UP – SETTIN UP by INCHING – SINGLE STROKING – CONTINUOUS OPERATION via Lockable operating mode selection switch : crankshaft and connecting rod  mounted in roller bearings fixed stroke, specified by customer between 20mm and 4Omm, .Slide is guided by backlash free preloaded linear 8-fold roller bearings. .single-disc friction clutch, frequency regulated 3-phase motor, speed range between 100 and 600 strakesimin modem C PC control (computer programmable control) mabu mPC-l 0 in freestanding control panel. Powerful feed  make this press the ideal solution for your production problems : High-performance gripper feed system mahu ZR 11 : A fully mechanica1u nit for the high estdemands, which runs absolutely synchronously with the automatic press. The slide operates according to an oscillating sine wave without any fixed stops and completely silently: Parallel clamping of materia1 with high gripping power using flat grippers. Mechanica1 intermediate lifting for pilot punch operation, infinitely adjustable,can be switched in or out. CNC Roller Feed Unit : Programmable roller feed units, on request with easy-to-use control system for complete feeder programs. Upper and lower rollers driven with no play no increased play with roller lifting or with thick materials. Electra-pneumatic roller lifting for setting up and for intermediate lifting during pilot pin operation. Roller pressure can be sensitively and variably adjusted. 3-phase servo motor drive Incandescence a CNC a rouleaux

• Weight: 100-1000kg
• Driven Type: Hydraulic
• Warranty: 1year
• Brand Name: Coastone
• Model: G40
• Series: G Series

The G40 features an O-frame just like all the G-Series press brakes. It deflects less than a conventional C-frame while still remaining lighter. The G40 has six servo driven ball screws which crown and bend simultaneously. Due to the servos’ high accuracy, the upper beam can be CNC deflected to “follow” the lower beam seamlessly. This is the unique system that gives you a great bending result. This is CoastOne’s unique direct crowning.   In addition to servo technology’s superior kinematic, it also saves the environment. The lack of hydraulic oil also eliminates expensive oil changes, spare parts, valves and maintenance expenses common to hydraulic press brakes.

• Moulding Area: 600 X 800 X 250 mm.
• Standard Block Height: 200 mm
• Dimension (L X W X H) ): (1385 X 1892 X 1687) mm.

hydraulic block machine This is a powerful block making machine that is equipped with a hydraulic system to lay out 3200 blocks per shift.

• Country of Origin: Made in India
• Application: Industrial
• Material: Mild Steel
• Brand Name: Sap Engineers
• Voltage V: 230 V

• Model: 7-DE
• Rating (Kw/Hp): 5.5/7.5
• Maximum number of tools operated: 1-2
• Weight (kg): 125
• Length (mm): 1200
• Height (mm): 750
• Width (mm): 700
• Pump Capacity (liters): 5.4
• Model: 9-PEH
• Rating (Kw/Hp): 6.75/9.0
• Maximum number of tools operated: 1-5
• Weight (kg): 75
• Length (mm): 1200
• Height (mm): 750
• Width (mm): 700
• Pump Capacity (liters): 5.4

This Is Tree Passage Micro Leak Testing Machine For Carburettor. All Three Passages Are Simultaneously Checked For Leak Rate. • 1st Station Ball Plug Press From Two Sides & Pin Press From One Side. • 2nd Station Leak Testing Of The Plugged Holes For Both The Sides.

Hydraulic trainer explains the essential physical principles of hydraulics. It demonstrates the construction and working of hydraulic components and helps students in the designing and building of various hydraulic circuits. The trainer is built on a compact trolley mounted on wheels for convenient handling. Various different models are available to suit varied requirements of the institutes. Basic, Advanced, Electro-Hydraulic, PLC operated and PC operated trainers are available. Electro-hydraulics is widely used in all industries for a variety of applications. The combination of electrical controls and hydraulics is very effective in automation. These circuits can also be studied on select models of the trainer. All the models can be supplied with profile plate and sliding arrangement for in-use component mounting and component storage facility. The advantage of this system is that it is space saving and the user can add more components as and when required. Computer Based Training Software (Automation Studio Software) On Oil Hydraulics and Pneumatics is also available as stand-alone software or a part of the equipment. An interface device for interface of trainer with Automation Studio Software is also available.

Road sweeper machine Manufactured by Shrikrishna Agro Equipment pvt ltd is unique sweeper for road cleaning particular for rough road. It is most effective sweeping machine used to clean roads, Highways, internal roads and open spaces, Industrial premises. Road sweeping machine is designed for use with almost any tractor which is fitted with hydraulic lift; three point linkage and power take off and can be fitted or detached in less than five minutes.

• Voltage: 415 VAC
• Country of Origin: Made in India
• Pressure: 2 kg/cm2
• Type Of Press: Hydraulic
• Heating System: Thermic 2000 kCal/hr
• Temperature: 200 Deg C
• Total Connected Loading Power: 18 Kw
• Size: 122x244 cm
• Power Source: Electric
• Phase Type: Three Phase

Jin-Shaa Machines is now introducing a new concept of tapping machines ,namely the Hydraulic Bent Arm Tapping Machine. These machines are compact light weight, and have a massive reach . Model shown in above photo has a horizontal radial reach of 1250 mm in 360 degress, and a vertical reach of 600 mm from mounting face. These machines come readily supplied with quick change tap  holders For tapping machine is pressed downward on pressing forward switch tap rotates forward on  completion of  tapping  depth just press return switch to reverse motor will return tap starts to return at double speed.. These machines provide a cost effective solution to costly tapping operation on VMC where by Tapping operation is done on this machine thereby saving costly VMC machine hour rate. Also operator idle time during operation is utilized. Technical Specification Radial Horizontal Reach 1250mm Vertical Reach 600mm Tapping Capacity: Model 1) 4 to 24 mm in steel Electric Motor Rating =5 Hp M/s Jin-Shaa Machines 83/10 Rahul Apts Law College Road Erandwane Pune 411004 India Contact : Sudarshan Patil cell no +918975768613. Please visit us at http://jinshaa.en.ec21.com or at www.jinshaamachines.com

• Type: Computerized Tilting Flume
• Brand Name: UMI
• Condition: 100% ADvance
• Warranty: 1 YEAR
• After-Sales Service Provided: YES
• Place of Origin: INDIA
• Blue: white

We offer tilting flume. The whopping array of tilting flume is accessible under cap of universal motion inc. Even a special gamut of hydraulic tilting flume is high in demand in india as well as in foreign countries.

We are leading manufacturer and exporter of Heating Presses, Plywood Hot Press, Hot Press Lamination Machine in Pune, India. We manufacture and supply exotic range of Hot Press Machines in various specification and deliver our range to internationally based comprehensive clients. These are in compliance with the industry standards and cater to the requirements of the various industries and sectors involved in wooden material manufacturing.

• Blade Size: 10"
• Cutting Capacity Platen: 4 mm
• Channel Cutting: 75 x 5 mm
• Angel Cutting: 50 x 6 mm
• Round Cutting: 20 mm
• Square Cutting: 20 mm
• Patti / Pata Cutting: 12 mm
• Approx Weight: 300 Kg

Hydraulic Power Hacksaw Machine, Lathe Machine, CNC Machines, turning centre

Facilitated with state-of-the-art infrastructure facility, we have been able to manufacture, supply and export a commendable range of Hydraulic Mounts. Available in different models with varied bearing capacities, these mounts are suitable for different loads, owing to which demanded across the market. Applicable in milling, grinding, wood working, power machines and hydraulic presses, these mounts are available at industry leading prices.

• Machine Weight: 100-300 Kg
• Voltage: 220 V
• Frequency: 50- 60 Hz
• Automation Grade: Automatic
• Cup Size: 100-200 ml
• Production Capacity (cups per hour): 500-1000

We are a highly acknowledged organization, engaged in presenting a remarkable range ofHydraulic Paper Cup Making Machine.

Hydraulics Trainer Kit, Repair & Maintenance Services, Cut Sectioned Machines

Hydraulic Trainer Kit, pneumatic trainer kit, Flow Control Trainer

A3 Size Automatic Hydraulic Machine, Pvc Card Fusing Machine

hydraulic components, exporters of hydraulic systems, Hydraulic Accessories

Hydraulics Trainer Kit, Plc Trainer Kit

Hydraulic Presses, hydraulic power cylinders

water hydraulic components

Hydraulic Press, Cable Tray, Hardware Tools, Industrial Hardware

Medical Equipments, Surgical Equipments, Veterinary Products

Medical Equipments, multi parameters monitor, Table Top Pulse Oximeter

hydraulic hot presses, three phase edge banding machines

hydraulic moulding machine, Toggle Molding Machines

Hydraulic Paper Plate Making Machine, Fully Automatic Paper Cup Making Machine