Hydraulic Machine Dealers in Paud Road, Pune

(39 products available)
  • Electrohydraulic System

    Electrohydraulic System

    Get Price Quote

    Electrohydraulic system Aluminium Alloy mounting panel for quick mounting and dismounting, Hydraulic circuits can be designed in software and the same can bedemonstrated on training kit

    more..
  • Computerized Servo Hydraulic Compression Testing Machines

    Computerized Servo Hydraulic Compression Testing Machines

    Get Price Quote

    • Power Supply: 440 Vac, 50 Hz, 15 HP
    • Weight: Net Weight – 1050 Kg,
    • Machine Capacity: 100 KN to 400 KN in different models
    • Clearance forTension test: 50-200 mm
    • Clearance for compression test: 0-900 mm
    • Ram Stroke: 200 mm
    • Clearance between columns: 600 mm
    • Load Range: With Load cell sensing 2 KN to 400 KN
    • Load Resolution: 1 : 10000
    • Load Accuracy: +/- 0.5% BETWEEN 4% TO 100% RANGE Traceable to NABL Standards
    • Length measurement: Linear Sensor for Cross Head travel.
    • Length Resolution: For Cross head travel 0.01 mm
    • Length Accuracy: For Cross head Travel +/- 0.1 mm
    • Ram Speed or Strain rate: Programmable from 0.2 to 200 mm/min with resolution of 0.1mm/min and 0.1 to 4 KN/sec
    • Operating /Test Modes: Rapid approach & slow Loading , User programmed Load Ramp KN/sec or Mpa/sec, displacement control um/sec
    • Actuator Drive: Servo Hydraulic Controlled Hydraulic Cylinder
    • PC Configuration: Supplied with machine. Intel Dual Core 2.8 GHz, with 52X CD-R/RW, , 2 GB RAM, 500GB HDD. Mouse, Keyboard, 2 USB ports,
    • Safety Features: Emergency Stop, Ram Over Travel Protection by full length adjustable Limit Switch, Electronic Over Load protection max. upto 100% of capacity, Both side Fragment guard
    • Display: Both Numerical & Graphical Display on PC Monitor
    • Units: Metric, Imperial & SI User Programmable
    • Size: 2000(H) x 900 (W) X 800(D) mm nominal, with Base Frame
    • Grips: As per requirement
    more..
  • Best Deals from Hydraulic Machine

  • Hydraulic Press

    Hydraulic Press

    Get Price Quote

    We are enlisted itself among the prominent hydraulic press manufacturers in india. We provide all kinds of hydraulic press machine including the big hydraulic press and small hydraulic press. The latest technology is used in all types of hydraulic press machines to ensure high durability and enhanced performance. The engineers designed the hydraulic press in a manner so that these can withstand larger weights. Keeping in view the different uses in the different industries, the hydraulic presses are enabled with numerous features. Extra care has been taken to ensure that they become operation friendly. These produce low noise during the time of operation.

    more..
  • Coastone G20 Press Brake Machine

    Coastone G20 Press Brake Machine

    Get Price Quote

    • Weight: 100-1000kg
    • Driven Type: Hydraulic
    • Warranty: 1year
    • Brand Name: Coastone
    • Model: G20

    The G20 features an O-frame just like all the G-Series press brakes. It deflects less than a conventional C-frame while still remaining lighter. The G20 has three servo driven ball screws which crown and bend simultaneously. Due to the servos’ high accuracy, the upper beam can be CNC deflected to “follow” the lower beam seamlessly. This is the unique system that gives you a great bending result. This is CoastOne’s unique direct crowning.   In addition to servo technology’s superior kinematic, it also saves the environment. The lack of hydraulic oil also eliminates expensive oil changes, spare parts, valves and maintenance expenses common to hydraulic press brakes.

    more..
  • CNC Press Brake Machine

    CNC Press Brake Machine

    Get Price Quote

    1 Piece(s) (MOQ)

    • Feature: Bending Force- 80 Tons to 900 Tons,Heavy Duty front Support on linear guide.
    • Condition: Good
    • Product Name: CNC Press Brake Machine
    • Thickness: 1mm to 25 mm
    • Working Length: 2000mm to 12000mm
    • Place Of Origin: Pune

    We supply a vast array of CNC Press Brake Machine to patrons. It is procured from famous vendors of the market who use premium raw material and advanced technology to manufacture it. CNC Press Brake Machine can be availed from us in different sizes and specifications as per the demands of the clients. Out CNC Press Brake Machine is sturdily constructed, with high precision and long lasting performance.   Features : Bending Force- 80 Tons to 900 Tons Working Length- 2000mm to 12000mm Thickness- 1mm to 25 mm CNC Control Cybelic Back Gauge with single Axis to 6 Axes Heavy Duty front Support on linear guide Manual /CNC control anti deflection system Laser safety Fiessier AKAS II with manual height adjustment Laser safety Fiessier AKAS II with automatic height adjustment Automatic Laser Measurement amd control of bending angle with pair of sensors

    more..
  • Filtek GR-301 Hydraulic Oil Filtration Skid

    Filtek GR-301 Hydraulic Oil Filtration Skid

    Get Price Quote

    • Driven Type: Hydraulic
    • Approximate dimensions (LBH): 400 x 400 x 1200 mm
    • Single Phase: 110/220 VAC
    • Frequency: 50/60 Hz
    • Motor Pump: Motor + 10 LPM
    • Total skid weight: 65 Kgs
    • Magnetic Conditioner: >1000 gauss

    1. Portable, Compact Plug & Play 7 LPM unit model GR-3012. Fully moulded Aluminum Die Cast Body and Cover.3. Special Double-layered structure ( Magnetic + Filtration Chamber )4. 1 micron filtration to NAS 7 and below5. Quick connect couplings for inlet and outlet on front facia.6. Magnetic Conditioner (>1000 gauss ) chamber for all Iron particle removal7. 100 ml water drain chamber8. Replaceable depth filter 1 micron with woven cotton for moisture adsorption.9. Low consumable cost.10. Pressure gauge/Hour Meter and Motor protection.11. Single Phase 110/220 VAC, 50/60 Hz Motor + 10 LPM Pump12. Approximate dimensions (LBH) of the Skid are 400 x 400 x 1200 mm13. Total skid weight is 65 Kgs

    more..
  • hydraulic oil filtration equipment

    hydraulic oil filtration equipment

    Get Price Quote

    hydraulic oil filtration equipment We are the leading manufacturers of high quality industrial micro filters and filtration systems in India. We believe that our expertise in this particular field should be made available to our customers in order to assist them in their quest for manufacturing excellence.

    more..
  • HYDRAULIC SPREADER MACHINE

    HYDRAULIC SPREADER MACHINE

    Get Price Quote

    • Spreading Force (Tons): 42
    • Max Spreading Distance (mm): 740
    • Max Pulling Length (mm): 600
    • Minimum Pulling Force (Tons): 7.4
    • Weight (Kg): 17

    The function of spreading, tearing, clamping, Pulling etc. Without the need of changing working head. The working head with unique anti-skid design, good anti- skidding performance. The manual reversing valve equipped with neutral automatic reset makes operation convenient and more accurate. FEATURES:    With the function of spreading, tearing, clamping, pulling etc. Without the need of changing working head.    The working head with unique anti-skid design, good anti-skidding performance   Adopt bidirectional hydraulic lock, with self - locking function   The equipment body adopts lightweight high strength aluminum alloy material with ceramic coating on surface, artistic and suitable for underwater operation   The handle is easy for left- and right-hand operation, moving parts have protecting jacket to ensure operator's safety.   The spreader head is embedded in the spreader arm with flat structure which can wedge narrow gap to carry out fast rescue.

    more..
  • Ball press machine

    Ball press machine

    Get Price Quote

    This Is Tree Passage Micro Leak Testing Machine For Carburettor. All Three Passages Are Simultaneously Checked For Leak Rate. • 1st Station Ball Plug Press From Two Sides & Pin Press From One Side. • 2nd Station Leak Testing Of The Plugged Holes For Both The Sides.

    more..
  • hydraulic block machine

    hydraulic block machine

    Get Price Quote

    • Moulding Area: 600 X 800 X 250 mm.
    • Standard Block Height: 200 mm
    • Dimension (L X W X H) ): (1385 X 1892 X 1687) mm.

    hydraulic block machine This is a powerful block making machine that is equipped with a hydraulic system to lay out 3200 blocks per shift.

    more..
  • Hydraulic Flat Lamination Press

    Hydraulic Flat Lamination Press

    250,000 Per Units

    • Voltage: 415 VAC
    • Country of Origin: Made in India
    • Pressure: 2 kg/cm2
    • Type Of Press: Hydraulic
    • Heating System: Thermic 2000 kCal/hr
    • Temperature: 200 Deg C
    • Total Connected Loading Power: 18 Kw
    • Size: 122x244 cm
    • Power Source: Electric
    • Phase Type: Three Phase
    more..
  • Hydraulic Press And Pneumatic Press

    Hydraulic Press And Pneumatic Press

    Get Price Quote

    GMJ Systems & Automations Pvt. Ltd. design & manufacture special purpose presses as per customer requirement for automobile components such as cylinder block, cylinder head, crank shaft, rear & front axle sub assembly elements, transmission sub-assembly elements etc to press bearing race, bearing cage, liners, piston, welch plugs, cam bush, valve seat, valve guide, oil seals, bush, pin etc,. GMJ Systems & Automations Pvt. Ltd. has designed, manufactured and proved bearing cage, bearing race, welch plug, valve seat, valve guide , piston, bush, pin, oils seal pressing machines to press in the engine cylinder block/head, rear & front axle, differential housing, wheel hub, ring gear, crankshaft etc. The procedure is to located and clamp the component in position and load the pressing component on dolly on pressing ram and pressed onto the component. All clamping, locating and plugging will be done by hydraulic cylinders automatically, hence the process time and labour required is greatly saved. The operator only has to load the component & then press cycle start push button. GMJ Systems & Automations Pvt. Ltd. also has designed special instrument to measure the load by using load cell & linear displacement by using linear transducer/scale while pressing. Provision has been made in the instrument to program 30 no’s of different program. Provision is also made to operate in manual mode, in order to make the operating sequence fool proof interlocks are provided in the circuit. The system can be operated through PLC based control system, it can be interfaced with machine by connecting solenoid valves, proximity switches, pendent, man machine interface (MMI) etc,. The system is configured to operate in auto / manual mode.   Special Purpose Pneumatic and Hydraulic Press           Liner Pressing Machine for Cylinder Block  Corn Bush Pressing Machine for Cylinder Block  Valve Guide Press for Cylinder Head  Valve Seat Press for Cylinder Head  Welch Plug Press for Cylinder Head and Block  Core Plug Press for Cylinder Head and Block  Seal Cover Press for Shock Absorber   Press for Compression Calve of Shock Absorber  Stem Seal Press for Cylinder Head  Valve Cotter Press for Cylinder Head  Ball Press for Two Wheeler Crankshaft.  Bearing Press for Rear Axle.  Press for Gear Assembly.  Crimping and Decrimping Machines    

    more..
  • Hydraulic Hot Press

    Hydraulic Hot Press

    Get Price Quote

    The Hot Press Machine developed by our company are not only cost effective but are also easy to install and maintain. Engineered by our team of expertise the machines are highly designed as per the international specification. Hot Press Machine are mainly used in Wooden Furniture Manufacturing Units, Interior Decoration Works, Wood working Training Centers and other Woodworking Industries.

    more..
  • Hydraulic Standard Drilling Machines

    Hydraulic Standard Drilling Machines

    Get Price Quote

    Hydraulically Operated Economical Machines. Low cost automation. Rigid construction. Drilling cycle (Rapid forward - feed - dwell - Rapid return). Spindle drive through stepped pulley. Machines also available in fabricated stand models. Machines can be equiped with multi spindle heads for mass production. Complete Hydraulic systems duly interface with the mother machine. Main motor of reputed brand, duly assembled with all drive elements. Comprehensive electrical control panels and operting pendant duly wired to the basic machine. Intermediate Table with Rack & Pinion arrangement for lifting and lowering of Work Table. Operation and maintenance manual.     Optional Accessories   Tool holders suitable for application. Coolant system consisting of:- Reservoir tank with chip collection tray, separation baffles, electric coolant motor, flexible piping & fittings, on/off valves, splash guards etc. Flexible lighting arrangement. Square work table Jigs & Fixtures.

    more..
  • Hydraulic Trainer Kit

    Hydraulic Trainer Kit

    Get Price Quote

    This trainer is designed for students to get familiarize with real life to factory automation system. Material handling is understood. The system consists of Electro Mechanical system. Various electro-pneumatic components are controlled by a PLC. Two different processing are simulated on this station. Trainers manually feed disc on a rotary indexing station. Optionally, a simulation of drilling operation is carried out.

    more..
  • HYDRAULIC COMBISHEAR

    HYDRAULIC COMBISHEAR

    Get Price Quote

    • Dimension: 600X500X180 mm
    • Weight: 16.5kg

    The hydraulic cutter is used for rescue operations in Road, railway, air,marine Crash rescue, Earthquake & other disaster rescue, building-collapse. This cutter and spreader tool can deform metal structures or shear metal of vehicles by spreading or cutting. The hydraulic cutter and spreader tool can move heavy object.

    more..
  • ultrasonic sealing machine

    ultrasonic sealing machine

    Get Price Quote

    • Ultrasonic welding guns are used to weld thermoplastic, where areas of welding are hard to reach the parts are too bigger to weld. • Pistol type & straight staple type guns available • Easy grip guns available with less diameter • High quality connectors used to lessen loose connections • Available in two frequencies : • 20khz & 35khz.

    more..
  • Tilting Flume

    Tilting Flume

    Get Price Quote

    1 Set(s) (MOQ)

    • Type: Computerized Tilting Flume
    • Brand Name: UMI
    • Condition: 100% ADvance
    • Warranty: 1 YEAR
    • After-Sales Service Provided: YES
    • Place of Origin: INDIA
    • Blue: white

    We offer tilting flume. The whopping array of tilting flume is accessible under cap of universal motion inc. Even a special gamut of hydraulic tilting flume is high in demand in india as well as in foreign countries.

    more..
  • Hydraulic Trainer Kit

    Hydraulic Trainer Kit

    210,000 Per Piece

    • Country of Origin: Made in India
    • Application: Industrial
    • Material: Mild Steel
    • Brand Name: Sap Engineers
    • Voltage V: 230 V
    more..
  • Filter Media Hydraulic Densing Machine

    Filter Media Hydraulic Densing Machine

    Get Price Quote

    Salient features  Size of the filter media handled 1.5 m length X 0.3 m width Precise crests and trough of the densed filter mediaCutter is operational in Bekaert Advanced Filtration

    more..
  • hydraulic tapping machines

    hydraulic tapping machines

    Get Price Quote

    hydraulic tapping machines, Ball Screws, lm guideways, Spindle, Coupling

    more..
  • Hydraulic Power Hacksaw Machine

    Hydraulic Power Hacksaw Machine

    Get Price Quote

    Hydraulic Power Hacksaw Machine, Lathe Machine, CNC Machines, turning centre

    more..
  • electro hydraulic systems

    Get Price Quote

    electro hydraulic systems, Lab Equipment, precision machine

    more..
  • hydraulic tapping machine

    Get Price Quote

    hydraulic tapping machine, Engine Bracket Used In Automobiles, Steering Shaft

    more..
  • Hydraulic Trainer Kit

    Get Price Quote

    Hydraulic Trainer Kit, pneumatic trainer kit, Flow Control Trainer

    more..
  • Hydraulics Trainer Kit

    Get Price Quote

    Hydraulics Trainer Kit, Repair & Maintenance Services, Cut Sectioned Machines

    more..
  • Hydraulic Presses

    Get Price Quote

    Hydraulic Presses, hydraulic power cylinders

    more..
  • Hydraulic Press

    Get Price Quote

    Hydraulic Press, Cable Tray, Hardware Tools, Industrial Hardware

    more..
  • Hydraulic Equipment

    Get Price Quote

    Hydraulic Equipment, Hydraulic Power Pack For Heavy Machine

    more..
  • Hydraulic Paper Plate Making Machine

    Get Price Quote

    Hydraulic Paper Plate Making Machine, Fully Automatic Paper Cup Making Machine

    more..
Filter by Locality
top