Industrial Furnace Dealers in Katraj, Pune

Specification & use :Muffle furnace is double walled design with inner chamber of 4 siliminite refractory slabs and outer chamber of clod rolled mild steel sheets, finished in powder coating. Insulation is provided by ceramic fibers blankets to minimize the radiation heat loss. Double walled insulated door is mounted on heavy duty Hinges for effective lockingarrangements.Temp range of furnace is above Ambient +5 deg c to +1200 deg c.

• Type: Industrial Furnace
• Material: Plastic
• Certification: ISO 9001:2008 Certified
• Weight: 100-300kg
• Voltage: 110V, 220V, 230V
• Condition: New
• Application: Heating Process
• Power: 1-3kw, 12-15kw
• Driven Type: Electric, Mechanical
• Warranty: 1yrs
• Automation Grade: Automatic

This type of weighbridge is most suitable for places with limited space e.g. Non-hilly areas where the construction of pit is not a costly affair. Since the platform is in level with the ground, vehicles can approach the weighbridge from any direction. Most public weighbridges prefer this design. Benefits lesser space required (as it has no ramps) tractor trolleys can also be weighed as platform is in flush with ground level. No ramp require for turck movement because it is installed in land surface level

• Features: Benchtop configuration Up to 6” substrate diameters Choice of heating technologies up to 1000 °C Gas and pressure control,Easy Simple access.

Systems are optimised for the thermal treatment of 2D materials and wafers under controlled atmospheres. Substrates are supported face-up on stage-top platens that are situated centrally inside a stainless-steel high-vacuum chamber fitted with appropriate heat shielding and a shuttered viewport. Heating is via a heat source located beneath the platen. Maximum temperatures up to 1000 °C are possible�depending on the heating technology used: ANNEAL systems can be fitted with up to 3 mass flow controllers (MFCs). Typical gases are Ar, O2 and N2, and full scale flow rates are flexible. All systems have wide-range gauges, but for improved accuracy, capacitance manometers are also available. In case chamber pressure is critical, automatic pressure control is available with control resolutions to 0.1 mbar. ANNEAL systems are highly modular and can be configured for a wide range of applications

Construction: The unit has an outer body made up of MS with epoxy powder coat finish & a door with a heat resistant handle. The unit has a double walled type construction with the muffles body at centre of the furnace & the control box at top with 1"solid spacer in between. A coil type Heater of Kanthal/Nichrothal wire wound on the muffle with cerewool blanket serves as the heating element. A brick insulation+ ceramicwool +high density mineral wool insulation of 4" is also given to have skin temp.of furnace less than 50°C. The door is provided with heavy-duty hinges and latch-catch lock system to open/close the furnace. Control panel: It is located at the top of furnace and includes a Auto tuned PID Microprocessor based temperature controller cum indicator with Cr/Al Thermocouples controls heating process.Power:230V or 440V, 50 Hz as per requirements. Control will be SSR output type. Safety Fuse with MCB for power is also provided.   Time proportionate bands, data logger & cyclic timer, real clock battery backup, RAM memory, printer & PC interface controller with Cr-Al thermocouple sensor can be provided with the unit at Extra cost. Our technology is fully controlled, easy to handle, user friendly, intelligent and reliable.We can also supply – Universal Testing Machines, Compression Testing Machines, Tensile Testing Machines, Chain and Rope Testing Machines, Spring Testing Machines, Vickers / Brinell / Rockwell Hardness Testing Machines, Dynamic Balancing Machines, Dynamic Hardness Testers, Impact Testing Machines, Torsion & Fatigue Testing Machines & Special purpose Material Testing Machines, etc.We reserve the rights to change the above specifications without any notice due to constant improvements in design.    

In this zone, the flue gases move in a direction opposite to that of the charge. This ensures considerable amount of waste heat recovery by convection. Heating zone: In this section, the actual heating takes place. Soaking zone: This is the critical zone of the furnace. Uniformity in temperature up to desired limits between the core and the surface is achieved in the soaking zone.

• Material: SS, MS.
• Country of Origin: Made in India
• Item Code: KDTS-TP-14
• Brand Name: KEIMM- Safe & Reliable.
• Length: Size as per required norms
• Operation: Constant & Smooth
• Features: Rigid Design, Easy Installation, Robust Construction at effective cost

Pit Type Weighbridge, weigh bridges, Tank Weighing Systems

High Vacuum Furnaces, Sputtering Systems, Vacuum Evaporation Systems

Portable Furnace, Wireless Industrial Monitor, Oven Control Panel

Regenerative Burners, Gas / Oil Solenoid Valve, limiting orifice valve