Industrial Heaters Dealers in Chikhali, Pune

We are offering an extensive range of high quality Steam Heater which are designed by our With the valuable assistance of skilled team of professionals.Steam Heater are widely used to heat the atmospheric air to the required process temperature.

• Country of Origin: Made in India
• Material: Stainless Steel
• Power: 1 kW
• Impact Resistance: Yes
• Frequency: 50 Hz
• Tube Length: 250 mm

Sensoheat manufactures various types of drum heaters such as clamp on heaters, flexible pad heaters, Semi circular heaters for applications wherein barrel or drum is kept in horizontal position and drum heater covering entire drum.. Sensoheat flexible drum heaters can save time by heating stored viscous fluid to a pourable temperature. The heater is built to be tough, long lasting, and resistant to chemicals. Because few materials stick to its silicone rubber with fiberglass reinforced construction, it is easy to clean. When not in use, it rolls for convenient storage. .

Thermin Power provide non-pressurised and pressurised Hot Water Generaters both shell and tube and coil type construction. The system is of maximum thermal efficient in the market.  

S.S.Terminal pins to prevent fusing and burning at terminals., Imported High grade MgO powder insulation for best heat transfer and electrical insulation.Compacted Heating Elements for efficient heat transfer & longer life.Nichrome 8020 or Kanthal Heating Coil.

• tube sizes ranging: 32mm OD to 76.2mm OD

Super Heaters are the most critical Boiler Component of the modern day Thermal Power Plant and are subject to very high metal temperatures. In fact the capacity of the Superheater to work without failure at higher Temperatures is what determines the boilers Capacity and it effects improvement in economy by reducing Steam Consumption of the Steam Turbine. We have fabricated thousands of Superheaters - Radiant, Pendant, Final, Fluidized Bed types, Reheaters for all kinds of Boilers having Complicated very close and Compact Shapes with tube sizes ranging from 32mm OD to 76.2mm OD and thickness from 3mm of 12mm in all types of Boiler Quality Steel Grades ranging from Carbon to Alloys and Stainless Steel for metal temperature ranging up 650 C and for Boilers of 10 to 500 MW Capacity.

• Country of Origin: India
• Type: Quenching Machine
• Condition: New
• Automation Grade: Automatic
• Country of Origin: Made in India
• Frequency: 50 Hz
• Phase: Three Face
• Output Current: 300 Kva

Anti Roller Bars Heating with 3 phase Dc upto 300 Kva upto 1000̊C and lifting and dropping on conveyor chain for quenching in oil tank for heat treatment. Can also be used for heating & bending.

• Brand Name: RadiHEat
• Material: Quartz- Tungsten
• Finishing: Clear, White coated, Gold coated
• Condition: New
• Power Source: Electric
• Color: Transparent
• Automatic Grade: N/A
• Shape: Linear

Litex is already supplying Twin Tube IR lamps from so many years in various types as per the need of customer. These types of Twin Tube lamps are A,B,C,...etc.

• Advantage: Precise designing
• Grades: Available in different grades
• Benefit: Reasonable rates
• Performance: Optimum
• Features: Long functional life
• Quality: Premium Quality

• Material: Ceramic, Mica
• Certification: CE Certified
• Application: Industrial Use
• Color: Silver
• Warranty: 1year
• Features: Stable Performance
• Shape: Round

We are the prominent Exporter & Supplier of highly efficient Band Heater. Procured from the trusted manufacturers or vendors, our Band Heater is free from any sort of defects. Owing to its excellent performance, durability and longer service life, our Band Heater is widely in demand. Contact us for obtaining Band Heater in bulk and at the most affordable rates!

Resin casting is a method of casting where a mould is filled with a liquid synthetic resin, which then hardens. The synthetic resin for such processes is a monomer for making a plastic thermosetting polymer. During the setting process, the liquid monomer polymerises into the polymer, thereby hardening into a solid. Our resin casting plant is manufactured using quality components and spare parts to ensure optimum performance and long functional life.

We are one of the leading manufacturers and suppliers of superheater, boiler superheater. Our device is used in steam engine that heats the steam generated by the boiler. Our range is available in various sizes, and can also be customized as per the application needs of our clients. Some of its features include: 1. Increases the efficiency of the steam engine 2. Eliminates corrosion of the steam turbine 3. Increases the capacity of the plant 4. Reduces the steam consumption of the steam turbine

• Capacities: From 2 LacKcal/hr to 30 Lackcal/hr
• Firing fuels: coal, wood, sawdust, Husk, baggase, agro waste

We offer thermic fluid heaters, fired by a wide range of fuels. Our TFH are available in both solid fuel firing as well as oilgas firing versions so that user gets the advantage of economically available fuels. All TFH are made with a coil type design ensuring instant heat. We offer fuel options of heavy oil, light oil, gas, dual fuel, wood, coal, husk, bagasse and other agro-waste fuels.These models are designed for maximum efficiency, using a variety of solid fuels including agro-waste fuels. It allows high process temperatures at low operating pressures.

Alliance Thermal Engineers designs & manufactures Electrical Heat Treatment Equipment of various ranges for Preheating & Post Weld Heat Treatment applications of various welded fabrications/ pipe joints etc.The equipment basically works on the principle of Electrical Resistance Heating method & is very much superior to the conventional wire & bead method, which is now becoming obsolete. Low Voltage of 60V / 80V is utilized for the heating elements. Low voltage system has many advantages over other heating system working on mains supply of 230V.Various Advantages are: It gives more flexibility in operation. Avoiding higher voltages on the job, giving total safety to the operator. Uniform temperature distribution. Optimum heat penetration etc. Thus, a full Heat Treatment Equipment set shall comprise of: Power Source – 40 / 50 / 70 / 96 kVA with 3 way, 6 way or 12 way control. These are available in Trolley Type Mobile Unit, ideally suited for construction / erection sites, workshops, power plants etc. Low voltage heating elements – 60 / 80V – Flexible Ceramic Pad Type, available in various sizes They provide heat, through conduction heat transfer for preheat / PWHT of welded joints. The heat conductivity is excellent & electrical strength is high at elevated temperatures. The heating elements can be simply wrapped around the pipes or jobs and secured in position with strips. For pipe joints of different dia. / thk., you can use combination of different sizes of elements of same rating. The element tails are connected to the power source by suitably rated cabling system. Cabling system – Feed, return, 2 way, 3 way, 4 way splitter cables between Power & the heating elements, Temperature measurement & Recording system :Temperature Recorder - This is portable unit for recording preheat and post heat temperatures up to 1200 Deg. C.Thermocouple wire - is used to measure temperature and monitor the control aids. Thermocouple wire is of nickel chrome / nickel alumel or K-Type, twin 21 / 22 SWG wire asbestos covered and normally supplied in 100 m roll.Thermocouple Attachment Unit - is used to attach a thermocouple to the weldmet. Fully Automatic Multi Channel Programmers – to program the preheating & PWHT cycle, Compensating cables are used to connect each thermocouple to the respective channel of the temperature recorder. All spares & accessories for the above. Different models are available based on client’s specific requirements, with Manual or Auto mode of operation.For bigger heat treatment requirements, Mains operated 230V heating elements like Flexible pads or 4 Bank Channel Elements, Finger Elements are also available.These equipment are used in all industrial sectors like thermal/hydel Power plants, fertilizer / chemical / refineries / steel & general engineering plants.   FCP – Low Voltage Flexible Ceramic Heating Elements.FCP03 – Typical Application of Low Voltage FCP’s for Preheating/PWHT of Pipe Weld Joints.6 Channel Stress Relieving ProgrammerFIP – Flexible Insulated PreHeaters for Preheating Applications.Power Source – 60 kVA Power Source, 6 Way.

• Voltage: 240-250V ac
• Sheath Material: High-Nickel Alloy ( CrNi-Stell, Material No: 1.4541 )
• Heating Conductor: Nickel / Chromium ( NiCr 8020, Material No: 2.4869 )
• Insulation Material: Highly Compressed magnesium Oxide ( MgO )
• Leakage Current: <0.5mA
• Insulation Resistance: Approx. 10MOhms
• Wattage tolerance: +/- 10%
• Thermocouple: Type' 'J' Fe/CuNi
• Standard Cold Length: 2.2 x 4.2 = 90mm, 3.2 x 3.2 = 100mm, 3mm dia = 150mm
• Max. Operating Temp.: 5000
• Min. Forming Radius: Flat         : 2.2 x 4.2 = 5.00mm, 1.8 x 3.2 = 4.00mm Square    : All sizes = 6.00mm Round      : 4.0 = 6.0mm, 3.0 = 4.00mm

• Voltage: 415 V
• Country of Origin: Made in India
• Is It Portable: Portable
• Input Power: 25 KVA
• Switch Fuse: 80 A
• Current Taps: 6 No.
• Duty Cycle: 100 %

Thermo Hopper heating systems play an important role in the removal of fly ash from precipitators and bag filter hoppers. The hopper heater is designed to preheat the hopper to prevent moisture condensate from collecting in it during startup conditions. In addition, they maintain the hopper and fly ash at temperatures above the flue gas acid dew psoint during normal operating conditions, Good heater contact with surface resulting in lower element temperatures.

• Furnace Type: Electric Resistance
• Approx. Hold Capacity (kg): Aluminium – 300 / 500
• During Melting unit per kg: 0.5 – 0.55
• During melting unit per hour: 13 -15
• Maximum Coil Capacity: 50kw – 78 kw