Industrial Paint Dealers in Parvati, Pune

We are reckoned as a high-flying Supplier offering quality and certified array of Heat Resistant High Temperature Paint. Smart logistics network, speedy services and reliable transit facilities have enabled us to furnish safe and time bound deliveries.   Trade Information Product Code - H R 1800 Brand Name - UGAM Minimum Order Quantity - 10 Unit of Measure - Kilograms/Kilograms Main Domestic Market - All India Packaging Type - Tin   Details UGAM H R 1800 does not require any primer. First clean the surface properly. If it is to be applied over metal, little roughening is required for proper adhesion of the product. After roughening clean the surface again. Apply first coat of UGAM H R 1800 by mixing water to binder in 4:1 ratio and adding powder slowly with mechanical stirring till entire powder is mixed. If required more water can be added as per requirement. Then apply coat up to 100 microns thickness in one go. Then after four hours curing, apply second coat in same way. After four hours raise the temperature of furnace @ 50 degrees C per hour till actual use temperature, cool down to room temperature and again apply two coats as above and cure in the same way. Now your furnace is ready for use. If you require more thickness for insulation purpose, you can coat further two times as per procedure mentioned above. The thickness should be determined as per your requirement on small panel first prior to use on large scale. The technical specification is correct to the best of our knowledge and under test conditions and we do not accept any liability towards misuse and contents of it. Product must be tested for specific use prior to use. Additional Information: Item Code : UGAMHR1800

• Packaging Type: Paper Box
• Coating Thickness: 0.5-1mm, 25-75 micron
• Speciality: Chemical Resistant, Water Resistant, Solvent Resistant
• Packaging Size: 1, 5 or 20L
• Usage: Industrial Use
• Brand Name: Humiseal
• Material: Acrylic,PU and Silicon
• Certification: UL,MIL,IPC,GX
• Shelf Life: 2Year
• Color: Clear
• Purity: 100
• Grade Standard: Industrial Grade
• Texture: Soft
• Form: Liquid
• Surface Finishing: Polished
• Country of Origin: India
• Waterproof: Water resistant
• Soluable In Water: No
• Weight Per Litre: 1 kg
• Density: 0.895
• Softening Point: 125
• Melting Point: 200
• Compressive Strength: nil
• Drying Time: 15 min
• Moisture: nil
• Specific Gravity: 0.895
• Viscosity: 200-350 cps
• Acid Value: nil
• Melting Temperature: nil

• Application: Road Marking
• Color: Yellow
• State: Powder
• Application: Brush
• Packaging Type: Woven Sack
• Packaging Size: 25 Kg

Shine � polish agent ( ss sp -) as ingredient in polishes, ss sp emulsion is used to provide good gloss with minimum smear in both car and furniture polish formulations. The active agent contained supports an easy polishing of the conditioner formulations and improves the brightness. Ss em 365, em 3500, em 4500 is high concentration thermal stable polish formulation properties values appearance milky white paste viscosity paste % solid content 28 � 65 ph of neat 6 � 8 specific gravity 0.97 � 0.99

• Packaging Size: 5 Litre
• Packaging Type: Plastic Bucket
• Paint Type: Emulsion
• State/Form: Liquid

• Coverage** surface by: On Smooth and non-absorbent surface. 80 - 90 Sq.ft/ per Ltr.
• Drying Time: Surface Dry: 30 minutes.
• @27° ± 2°C & RH 60 ± 5%: Recoating: Min. 4 - 6 hrs.
• Gloss Levels/ Sheen levels: Matt
• Thinning: If required with water.
• Stability of Thinned Paint: Use within 24 hrs.
• Shelf life: 1 year from date of manufacture in original tightly closed containers away from direct sunlight and excessive heat

FEATURES & BENEFITS 1. Water resistant.2. 5 years life.3. UV resistant.4. Based on 100 % acrylic binder.   RECOMMENDED USAGE Ensure the surface is clean; dry free from all defective or poorly adhering material, dirt, grease, wax etc. Remove all loose or poorly adhering materials by rubbing down using suitable abrasive paper and thereafter wipe off. Treat fungus affected area.Clean the surface by wire- brushing and wash with water.

We are offering silicone emulsions mould release agent (ss em) is silicone fluid emulsions which are inert, heat stable, non-toxic products, covers many industrial applications where lubrication, gloss, antistatic, protective and release properties are advantageous.

Paints, Dry Distemper, Primers, Cement, Allied Products

Chrome Spray Paint, Epoxy Zinc Rich Primer, Decorative Paints

stencil paints, stencil inks, Painting Stencil

Epoxy Coating, Residencial Painting Service, texture painting services

wall texture, Glass Films, window films, Wall Murals, wall tattoos

Paints

Asian Emulsion Paints, 24 hours towing

Paint, Tin Plates

paper colour, Carbonless Computer Stationery, ATM Paper

Luminescent Paint

flame proof paint

Industrial Paints

Varnishes, Laminate Flooring, Resins

school paint, Safety Coverall, Female Ot Uniform, School Skirts

Waterproof Primers, industrial flooring, Aerospace Adhesives

pent

Back Paints, Chinese Glass Crystal, diamond glass cutter

hardener

Pain Killer, Antibiotic

Industrial Paints, Powder Coatings

epoxy flooring primer