Industrial Switches Dealers in Chakan, Pune

Try out and start application of SUCO explosion-protected pressure switches in potentially explosive atmospheres: ATEX-certified for use in potentially-explosive atmospheres Compact design Micro-switch for reliable operation Switching point can be easily adjusted by user when switch is in operation Technical data: Type: 0165, 0340, 0341 Degree of protection: IP65 Protection zone: 1 (Type 0165) 22 (Type 0340, 0341) Switching power: 1A / 250VAC, 0.25A / 250VDC (Type 0165) 2A / 250VAV (Type 0340, 0341) Body material: AlMgSi1 F28 (Type 0165) Steel, zinc-plated Anodised aluminium (Type 0340, 0341) Conductor cross-section: 3 x 0,75mm2 (Type 0165) 3 x 0,5 mm2 (Type 0340, 0341) Switching frequency: 200/min Temperature stability for diaphragm/seal materials: NBR; EPDM -20°C to +80°C; FKM -5°C to +80°C Mechanical life expectancy: 10^6 cycles (at pressures up to 50 bar) Vibration resistance: 10g / 5-200 Hz sine-wave Shock resistance: 294 m/s²; 14 ms half-sine-wave Cable length: standard delivery 2 m with wire end sleeves Hysteresis: 10 – 30% (not adjustable)..

Try out and start application of SUCO explosion-protected pressure switches in potentially explosive atmospheres: ATEX-certified for use in potentially-explosive atmospheres Compact design Micro-switch for reliable operation Switching point can be easily adjusted by user when switch is in operation Technical data: Type: 0165, 0340, 0341 Degree of Protection: IP65 Protection zone: 1 (Type 0165) 22 (Type 0340, 0341) Switching power: 1A 250VAC, 0.25A 250VDC (Type 0165) 2A 250VAV (Type 0340, 0341) Body material: AlMgSi1 F28 (Type 0165) Steel, zinc-plated Anodised aluminium (Type 0340, 0341) Conductor cross-section: 3 x 0,75mm2 (Type 0165) 3 x 0,5 mm2 (Type 0340, 0341) Switching frequency: 200min Temperature stability for diaphragmseal materials: NBR; EPDM -20°C to +80°C; FKM -5°C to +80°C Mechanical life expectancy: 10^6 cycles (at pressures up to 50 bar) Vibration resistance: 10g 5-200 Hz sine-wave Shock resistance: 294 ms²; 14 ms half-sine-wave Cable length: standard delivery 2 m with wire end sleeves Hysteresis: 10 – 30% (not adjustable)

• Color: BLACK,RED,GREEN
• Mechanical Life: Over 30000 Cycles
• Model Number: NRS406
• Material: Plastic
• ROHS Compliant: Yes
• Switch Function: ON/OFF
• Illuminated: Illuminated
• Electrical Rating: 6A 250VAC/9A 125VAC(UL)
• Degree of protect: Ip 40
• Electrical life: Over 10000 cycles
• Contact resistance: <10m ohm
• Insulation resistance: >20M ohm
• High voltage resistance: >1500V 1 min.
• Ambient temperature: 2 0°C to +85°C
• Atmospheric humidity: Max.85%
• Temperature rise at the terminal: Max 30°C (UL1054)
• Solder ability of terminal: Max 350°C,3s

• Weight: Approx. 50 g (with 3-meter lead wire)
• Enclosure: IP 40
• Dimension: 26x10x10.4 Mm
• Current Consumption: 10mA max.
• Medium: Air, Non-corrosive / Non-flammable gas

• Brand Name: Peco
• Warranty: 2 Years
• Our OE Part No.: 265454510131
• Use: For Indica Car
• Weight : 80g
• Pack Size: 100PCS/Box

Keeping in compliance with the international quality standards, the raw material used to manufacture the product is of high quality due to which we are capable of delivering only quality products. We have state-of-the-art warehouse that is well-maintained by the storage experts. They ensure that our wide array of products is kept safe before making the final dispatch.

We are the leading manufacturer, exporter and suppliers of Air Operated Diaphragm Level Liquid Switch in Maharashtra, India. This is a simple, cost-effective level switch which is manufactured using the finest quality raw materials. It can be easily installed and has been proven to maintain a long shelf-life. This switch is used for highly-viscous liquids, sewage & slurry.   Details :Simple, Cost-effective and easy to install switch with minimal maintenance  Range - upto 2000mm Wtd Parts - PP, SS316 Max Temp - 60oC Max Pressure - Atm Contact - 5A, 250VAC x SPDT Enclosure - Cast Al x IP66 Applications : Highly-Viscous Liquids, Sewage & Slurry

• Mill Duty MDT: (300mm - 600mm)

Thruster brake is a device to retard the speed of moving machinery and to stop it accurately to the desired position. The braking force is applied to the brake shoes by a pre-stressed compression spring. The shoes press on the rotating brake drum retarding its speed, and finally stopping it. The releasing of the brake and compressing of the spring is done by thruster. Thruster Brake Series - SMD with Eldro, (150mm - 710mm) , Thruster Brake Series - Mill Duty MDT (100mm - 250mm) , Thruster Brake Series - Mill Duty MDT (300mm - 600mm).

• Mounting Options: Top Mount
• Switch Type: Magnetic Float Type
• Country of Origin: Made in India
• Media Type: Liquid
• Current Rating: 2 Amp at 24 V DC

We are offering a comprehensive range of Float Switch that can be added as an optional extra to the pump to control the water level in a tank and dam by switching the pump on and off electronically on low and high water level positions. A float switch is a device used to detect the level of liquid within a tank. The switch may be used in a pump, an indicator, an alarm, or other devices.  

• Application: Industrial Use
• Operating Temperature: 20-40deg C
• Frequency: 50HZ
• Power: 0-5Amp

Beam Pressure sensing switch for Karly Mayer Warper Beam 

• Type: Auto Switches

• Type: Float Switches
• Material: NBR, Nylon, PVDF
• Voltage: 200VDC, 230VAC
• Application: Magnetic Use
• Frequency: 50HZ, 60Hz
• Power: 0-5Amp, 10-15Amp, 5-10Amp
• Temperature: 0Dig C To + 60Dig C
• Hole Diameter: 0-20mm, 20-40mm
• Setting Range: 0-1500pF, 1500-3000pF

• Type: Pressure Switches
• Country of Origin: Germany
• Measuring Range: -1 to 10 bar

Electronic vacuum and pressure switch with IO-Link interface for measuring and monitoring vacuum and overpressure in automation and handling systems.

ACCESSORIES FOR MAGNETIC CYLINDERS Series A10, A13, A17, A19, A25, A27, A52, A55. We are authorised dealer for Electro Pneumatics, Deep Laxmi, Dutta, Siemag, & Festo & Stockiest for Janatics Pneumatics.

    • Motor torque adjustable• Special Clutch mechanism to protect Motor• Sealed bearing for Rotating shaft.

We are offering conductive type level switch. conductivity type level switch is used for sensing level of conducting non sticky clear liquids like water, acid, salt & various chemicals, sugar solutions, milk, juice etc. It is simple, low cost level controller for controlling liquid levels in any container and is quick to install. Low current operated circuit ensures personnel safety. It is offered with wide range of electrodes with different mounting configuration, constructions and styles to suit every application. A conductive level switch operates on the base of conductive principle. These are equipped with two or more electrodes (one is ground and others are sensing electrodes). When a conductive fluid comes in contact with two or more of sensing electrodes, an electric circuit is completed. A very small alternating voltage is applied to two probes tips. The circuit gets closed by liquid when liquid touches the probe tip. The voltage & current used are so small that no dangerous shock can occur. The use of alternating voltage prevents deposition and electrolysis. specification : control supply : 230 v ac 50 hz 24v dc. Please specify. output : 1 co relay contact, rated for 5 amps. Resistive 230 v ac. max. Temp for control unit : 60 oc enclosure : din rail mounting, ip 30 field mounting, ip 55. indication : led indication. For relay on mounting of probe : flange mounting. sensing : ss wire, insulation : ptfe. counter weight : ss.

We are one of the leading traders of Flow Indicating Switches that are energy efficient and cost effective. These MTD make Flow Indicating Switches are magnetically actuated and are specifically used for designing positive detection of fluid flow through any equipment. The suitable sizes of the switch can be selected from actual flow rate. In these switches, the flow range covered is from 1 to 150 LPM and the fluid flow in the system can be seen through transparent tube.

• Usage: Industrial use
• Type: Limit Switches
• Certification: ISO 9001:2008 Certified
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Switch Type: Lever Limit Switch

Heavy duty enclosures for dusty environment,BallBush bearing options for Cam Shaft, Wide over travel of the lever is permissible without damaging switch element ,Robust spring to absorb impact from dog, Grade of protection IP 65,Cast AlCast IronFlame proof FRP ABS enclosure , Contact combination 1N0+1NC 2N0+2NC Heavy duty contacts 10 AMP @ 110230500 Volt Ac,Retaining type screws for shrouded cover ,Toggled typeV leaver type limit switch.

Hermetic microswitch (-55 oC to + 150 oC) Without accessoriesWith accessoriesHermetic Limit Switches  High temperature hermetic microswitch (-55 oC to +250 oC)Without accessoriesWith accessoriesHigh temperature hermetic limit switches  Sensitive microswitch Without accessories  Waterproof limit switches With simple plungerPlunger with adjustable roller in 45° steps   Limit switchesExamples of customized hermetic and waterproof

• Brand Name: TECHTROL
• Enclosure: Cast Al, W Proof IP 66
• Process Connection: Screwed 1" BSP (M) with integral 1/2" BSP(F) to hold air pipe
• Max Temp: 0 - 60 Deg C

We are offering air operated diaphragm switch. Compact, versatile, economical, 2mtrs range with 1 spdt contacts for sewage, slurries, viscous liquids, dirty oils in tanks open to atmosphere.( 60°c).

• Media Type: Gas , Liquid, Hydraulics
• Model No.: CNI-Series
• Pressure range: -1.....40 Bar
• Repeatability: 1.0 %
• Brand: Baumer
• Model: CNI Series
• Switching Rating: 15 A, 220 VAC & 0.4 A, 110 VDC
• Process Connection: 1/2" BSP (M)
• Protection: IP66

• Model Name/Number: WFS6000
• Brand: Honeywell
• Model No.: WFS6000
• Flow Media Type: Liquid
• Weight: 1 Kg
• Size Per Batch: 23 x 23 x 23 cm
• Media Type: Water

• Features: Flawless finish, Sturdy Construction, User-friendliness, Corrosion Resistance
• Ambient temperature °C: -40 - 65 °C
• Contact Function: SPDT
• Electrical Connection Size: 6-14 mm
• Enclosure Rating: IP30
• Left & Right Side Regulation: -0,20 - 7,50 bar & 8,0 - 32,0 bar
• Operational Current AC-1: 16 A, 400 V
• Operational Current AC-3: 16 A, 400 V
• Pressure Connection Type: Flare nut - 1/4" Female
• Reset Function Left: Auto
• Reset Function Right: Max
• Test Pressure Max Left: 20 bar
• Test Pressure Max Right: 35 bar
• Working Pressure Max Left: 17,0 bar
• Working Pressure Max Right: 35,0 bar

• Usage: Industrial use
• Type: Limit Switch
• Certification: ISO 9001:2008 Certified
• Color: Black
• Condition: New
• Max. Voltage: 220 VAC
• Surface Finishing: Power Coated
• Switch Type: Lever Limit Switch

It senses only ferrous objects magnets; High counting speed. These are available in M12, M18, M30 and above. Sensing range : 10 to 50 mm. Grade of protection is IP-68.These switches are used only for position sensing applications. These can also be used for Roto-meters, Direction sensing, Level Sensing of liquids.

• Features: Weatherproof , Long service life , Nominal price
• Flot Size: 25x25mm
• Differential: 3-5mm
• Guide Tube Material: PP
• Process Conn: 1/8" BSP With lock nut
• Switch Capacity: 10VA or 40VA
• Voltage: 240VAC/200VDC
• Switching Current: 2A
• Max Test Pressure: 1kg/cm2
• Max Temperature: 70 Degree C
• Weight: 25g

• Switch Type: Rotary Limit Switch
• Rated Voltage: 240 VAC
• Country of Origin: Made in India
• Item Code: DO12
• Brand: KEYCEE
• Model Name/Number: KLS001X