Industrial Valve Dealers in Chakan, Pune

• Application: Industrial Use, Oil & Gas Industries Use, Wide Goods and Appliance Use Etc

Wire Range 0.08mm to 10mm made on most advanced CNC machines with online checking...   RAW MATERIAL DETAILS  Stainless Steel : We manufacture springs in, JIS : SUS 302/304 AISI 302/304/316 EN 10270-3,X12CrNi 17 7, X10CrNi 18 8   Special Stainless Steel Wires: SUS 631J 17 7 PH Wire Duplex 2250 wire for high relaxation properties. Spring Flex wire for high relaxation properties, high UTS, high force , high corrosion resistance with higher working life. Inconel 718 and 750 grades specially for critical valves which can withstand temperatures till 1250 degree centigrade. All our wires have ROHS & REACH Compliance.   RAW MATERIAL DETAILS High carbon spring steel : We manufacture in, JIS: SWPA & SWPB EN10270-1, SM, DM, SH, DH Grades IS 4454 PART 1 (2001) in SM, DM, SH, DH Grades Pre coated wires like Benzinal and Alumar to avoid plating and have salt spray life of above 440 hours. This coating is done on SWPA, SWPB, SH and DH. MUSIC/PIANO wires Vd Si Cr wire, SWOSC-V (Oil Tempered wire) PB (Phosphorus Bronze) wire as per IS 7608 Group 1 & 2 Copper Wires All our wires have ROHS & REACH Compliance We have good supplier network which work with us to improve quality on continuous basis.

• Material: Sintered
• Packaging Type: Packing of 1000 Nos.
• Size: 1/2 inch
• Model Number/Name: 1/2 inch valve guide
• Corrosion Proof: Yes. Steam Treated

• End Connection: BUTT WELD AS PER ASME B16.25 / SOCKET WELD AS PER ASME B16.11 / SCREWED AS PER ASME B1.20.1
• SIZE: 1/2"TO2"
• PRESSURE CLASS: 800,1500,2500
• Bolted Bonnet: 800
• Welded Bonnet: 1500 & 2500
• Design Standard: API602 / ASME B16.34
• Inspection Standard: API598
• Face To face: MFG.STANDARD
• Body: ASTM A105N / ASTM A350LF2 /ASTM A182F11-CL2 /ASTMA182 F22-CL3 / ASTMA F91 /ASTM A182304L / ASTM A182F316L
• Plug: ASTM A217GR.CA15 / ASTMA276 TYPE 410 / ASTM A217GR CF8MSS316 / ASTM A217GR.CF8SS304 / MONELALLOY-20/ HAST-ALLOY
• Seat: ASTM A276 TYPE 410 SS316 SS304/ ASTM AA276 TYPE 410 + ST6
• Spring: SS316
• Bonnet Gasket: SPIRAL WOUNDED 316 + GRAPHITE

• Product: Thermodynamic Steam Trap
• Product Name: SLTT76

SLTT76    UNIQUE FEATURES   Corrosion Resistance SS Body construction. Uniquely Designed Maintainable Seat Differential hardness value for seat & disc Function test - 100 % on steam ·         Uniquely designed seat ·         Easy maintainable trap ·         Vacuum heat treated seat and disc therefore life of trap equal to life of plant ·         Cap tightened against gaskets ensuring no damage to trap         DESIGN CONDITION ·         Max allowable pressure: 48.9  bar ·         Max allowable temperature: 538℃              

Electropneumatics makes pneumatic valves suitable for compressed air, water, vacuum, gases and low pressure oil. They are available as solenoid-operated, pneumatically-operated and manually-operated. Solenoid coils are available for AC and DC voltages. The valve range consists of Directional control valves- 2, 3, 4-way, 2, 3-position, singledouble solenoid, directpilot pneumatically manually operated, Flow control, check and needle valves, Quick exhaust valves, Shuttle valves, Rotor seal couplings, Dual sensing valves, Rotary actuators, Stackable valves- 2, 3, 4-way, 2, 3-position, singledouble solenoid, Accessories like silencers, mufflers, air preparation units

• Color: all
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank
• Size: 200NB
• Brand: Sai Machine India
• Model: IND100RVL

• Material: Carbon Steeel
• Number Of Way: 2way
• Size: 3/4inch
• Application: Water Fitting
• Pressure: High
• Feature: Durable

Solenoid valve

MechCon rotary valves are available with square or round inlet and outlet flanges. Housing can be fabricated out of sheet material or cast. Common materials are cast, carbon steel, 304 SS, 316 SS, and other materials.

• Country of Origin: India
• Type: Rotary Airlock Valve
• Material: Mild Steel, Stainless Steel
• Application: Industrial
• Color: Blue, Grey, Sky Blue, White
• Voltage: 110v, 220v, 440v
• Power: Solenoid, Motor Operated
• Pressure: High, Low
• Structure: As Per Customer Requirement
• Port Size: As Per Customer Requirement
• Brand Name: PLUTONTEK
• Temperature Of Media: As Per Customer Requirement
• Color: As per Customer Requirement
• Product Name: Rotary airlock Valve
• Usage: Material Handling, Material Discharge
• Size: As per Customer Requirement
• Grade: As per Customer Requirement
• Delivery: As per Customer Requirement

• Voltage: 24 V AC
• Type: Solenoid Valve
• Packaging Size: 5 Pieces

• Body / Bonnet: ASTM A 182 Gr F 304 / F 316
• Trims: 18 Cr 8 Ni / 18 Cr 10 Ni 2 MO
• Mfg Std: API 602 / BS 5352
• Insp & Test Std: API 598 / BS 6755
• Ends: SCREWED TO BSP / BSPT / NPT , SOCKETWELD TO ANSI B 16.11
• Hyd-test Pressure: BODY : 3000 Psig (211 Kg/Cm2 ) , SEAT : 2000 Psig (140 Kg/Cm2 )
• Size Range: 15 MM TO 50 MM

We put forth a wide range of butterfly valves including triple eccentricity butterfly valve, double eccentricity butterfly valve, and centric construction butterfly valve. We are a manufacturer, supplier, and exporter of butterfly valves. The butterfly valves are fabricated using quality metals for weatherability, resistance against corrosion and sturdiness. The butterfly valves feature precise design, ensuring zero leakage of any type of medium. Customers can avail butterfly valves in different specifications as per their requirement. For more details please click on the links given below

• Material: Carbon Steel
• Size: 500 To 2000 Mm
• Minimum Order Quantity: 1 Unit
• Temperature: up to 400 Degree Celsius

We introduce our business as a noteworthy manufacturer and supplier of a qualitative array of Poppet Damper. Features: Easy installation Corrosion resistance Rugged design

Vehicle : 2 and 3 wheeler Engine Size : 50 cc onwards Engine Type : 4 stroke gasoline engines. STANDARD SPECIFICATION Maximum Air Flow More than 2840 gh (40 lmin) at different pressure 1.5 kPa (150 mmAq) Valve closing point 58.7 ± 4.0 kPa (440±30 mmHg) at air flow 300 gh (4.2lmin) Part for setting Valve Closing pressure (coil spring) 46.7, 50.7, 54.7, 58.7 kPa (350, 380, 410, 440 mmHg) Jet size of diaphragm cover Ø0.5 , Ø0.8

• Material: Cast Iron
• Valve Size: 65 mm
• Media: Water
• End Connection: Socket Weld
• Color: Blue
• Size: 22 inch
• Pressure: 85 psi
• Design Type: Ball Valve Design
• Brand: Tiger

• Protection: IP65 100% ED coil
• Port Size: 1/8"-1/2 Inch
• AC Voltage: 220 V
• Pressure: 0.0-1.0 MPa
•  :  

Diaphragm Digital Control Valve is an electrically actuated, hydraulically operated multi-function control valve. It can be used for local as well as remote controlled batching operations with electronic batch controller. The valve also offers an in-built flow governing function   DESIGN FEATURES   Precision multi-stage opening and closing Fail-safe design Low pressure drop Bubble-tight seat design Flow rate control PRINCIPLE OF OPERATION   The Diaphragm Digital Control Valve basically consists of a diaphragm operated main valve and two solenoid valves. Normally open (NO) solenoid connects the valve cover chamber to the upstream pressure, whereas normally closed (NC) solenoid connects the valve cover chamber to the downstream pressure. When the Diaphragm Digital Control Valve is used with an electronic batch controller, it can be digitally controlled by operating the solenoid valves through any of these three stages : when NO and NC solenoids are energized, the valve opens gradually. when NC solenoid is de-energized (keeping NO solenoid energized), the valve locks at its current position. when NO and NC solenoids are de-energized, the valve closes gradually. The operation of the valve is simple and is explained below. The total batch quantity delivered and controlled through the valve is divided into 7 stages (Refer graph) for the purpose of convenience. Initially both NO and NC solenoid valves are in de-energized condition. The NO valve applies high upstream pressure on the diaphragm, whereas the NC valve prevents this pressure from getting drained to the downstream side. The valve remains close as a result of this. Stage 1Both NO and NC solenoids are energized. NO valve now restricts the high upstream pressure from entering into the cover chamber. NC valve permits the pressure above the diaphragm to vent to the low downstream pressure. This creates a differential pressure across the diaphragm, the high upstream pressure acting from below the diaphragm opens the main valve and allows the flow to start through the valve. Stage 2As the flow rate reaches predefined value (set in the batch controller as “Low Flow Start”) the NC valve is de-energized. This prevents further draining of the chamber and locks the valve at this flow rate. Initial delivery at slow speed avoids splashing of product and also avoids the generation of static charge. Stage 3When sufficient quantity is delivered at the slow speed, the NC valve is energized again. This allows further draining of the chamber and hence increases the flow. Stage 4When the flow reaches to the maximum level (set in the batch controller), the NC solenoid is de-energized. This maintains the constant high flow rate for the remaining batch. During this stage, the flow rate control is done by the batch controller. When a number of flow meters are connected to the same pump, stopping (or starting) one or more meters increases (or decreases) the flow rate at the remaining meters. When the flow rate increases, the NO solenoid is energized momentarily. This injects some high pressure in the cover chamber and makes the valve to throttle in order to maintain the set flow rate. If the flow rate decreases, the NC solenoid is energized momentarily. This allows slight draining of the chamber and allows the valve to open further in order to maintain the set flow rate. Stage 5At the end of the batch, the NO solenoid is de-energized. This injects high upstream pressure into the cover chamber and throttles the valve. Stage 6When the valve throttles sufficiently to achieve the predefined slow closing flow rate (set in the batch controller), the NO solenoid is energized. This maintains the uniform flow rate. Stage 7When the batch quantity is delivered, the NO solenoid is de-energized. (NC solenoid is already de-energized.) This applies high upstream pressure into the cover chamber, which makes the main valve to close completely to achieve bubble-tight shut-off. Note: The number of stages during opening and closing are programmed in the batch controller and can be as many as desired. One stage during opening and two during closing are recommended. Caution: Sufficient pumping flow rate should be available to achieve the flow parameters set in the electronic batch controller. In the absence of this, there are chances of delayed response in closure, resulting in valve over-run.

• Material: Brass/Bronze
• Valve Size: 15 MM
• Media: Water
• Brand Name: SKS

• Type: Rotary Air Lock Valve, Drop Thru Type / Offset Type / Blow Thru Type
• Material: Mild Steel, Stainless Steel
• Application: General, Industrial
• Color: Blue, Grey, Sky Blue, White
• Voltage: 220v, 440v
• Power: Manual
• Pressure: High, Low, Medium
• Structure: Solid
• Port Size: Other
• Country of Origin: India
• Brand Name: D
• RAL Size: From 150 mm to 1000 mm.
• Drive Types: Direct Coupled / Chain Driven / Direct Mounted

• Material: Metal
• Usage: Industrial
• Condition: New
• Production Capacity: High

After giving tough competition to our contemporaries in Pune(India), we have now come forth to challenge the providers in other markets. By keeping records of the ever-evolving requirements of the clients, we have adopted a system that facilitate them to make transaction in both online and offline modes.

The Bypass Valves, provided by us, are manufactured using stainless steel. Clients can select any payment mode from our online or offline methods. Both of them are secure, hassle free, and ensure the fastest trade with the customers. We are strategically based in Pune(India) and are in proximity with the resources required for easy production process.

The hand lever valve are efficient in working without any slightest dysfunction. They are produced by SAMSON in all dimensions and are capable of rugged functioning.  

• Type: Non Return Valve
• Brand Name: Schmalz
• Material: Brass

Non-return valve maintain the vacuum in the case of a power failure or a failure of the vacuum generator. Thye can also be used with energy-saving systems when handling non-porous materials

We are offering industrial ball valves. size available : 1/2 " to 1.1/2 " (dn 15 to dn 40) temperature rating : -60 f to 450 f pressure rating : # 400, # 600, port: full body & pipe end : wcb, cf8m, cf8, cf3m & special alloys seats & seals : ptfe, rptfe, carbon filled ptfe design & manufacturing : iso 17292 (bs5351) / api6d face to face dimensions : manufacturers standard inspection & testing : iso en 12266 - part I (bs6755-1) butt weld dimensions : ansi b 16.25.

The Rotary valves are used to minimize leakages of air inside the System. We offer wide range of rotary valves with different types and Specifications to fulfill our different needs. We manufacture open as well as closed type’s rotors with S.S. and M.S. construction and casing in Aluminum casting and M.S. casting. We manufacture both direct drive as well as chain drive as per convenient of customers.

Fixed valve, we have various ranges of Column Trays that includes Fixed Valve Tray, Tray Panel Assembly, Bubble Cap Tray, Float Valve, Bubble Caps, and much more. So far, we are able to design and manufacture all types of counter flow trays and distillation column for any type of column size and can be operated using perforating and bending procedures.

Valve Size 20nb, 25nb, 40nb, 50nb Usage/Application Water Treatment Brand Real Mould Material ABS Media Water Pressure Medium Pressure Handle Operation Manual Packaging Type Box Our company has gained name and fame in presenting Manual Multiport Valve. Real Mould MPV, real mould multi port valve, Real mould softener MPV, RM softener MPV, RM Filter MPV, RM.

DEMECH provides a complete range of Rotary Airlocks suitable for air lock applications ranging from gravity discharge of filters, rotary valves, cyclone dust collectors, and rotary airlock storage devices to precision feeders for dilute phase and continuous dense phase pneumatic conveying systems. Rotary Air lock valve is used in Bulk Handling System for free flowing dry powder, granular, crystal or pellets form of material. It is usually fitted below Chain conveyor Screw Conveyor Hopper Silos Bag filter ESP Bins etc. The main function of a Rotary Air lock Valve is to provide a rated Drop-through discharge, which determines the size and capacity of Rotary Air Lock Valve. Besides this, it also functions as a Rotary Airlock to seal and prevents possibility of back flow of material in a pressurized system.