Industrial Valve Dealers in Khadakwasla, Pune

Hygienic design according to EHEDG. No leakage during the openingclosing of the valve. Balanced lower seat. Single-acting pneumatic actuator. Easy assemblydisassembly of internal parts by loosening a clamp fastener. Open lantern allows visual inspection of shaft sealing. 360º adjustable body.

We are the main supplier of this product.

The NDL (Non Dead Leg T Valve) diaphragm valves, manually or pneumatically operated, are specially designed for use on aseptic processes in the pharmaceutical industry. The valves are widely used at points of use in the loops of purified water (PW) or water for injections (WFI). Operating principle   The diaphragm provides the body seal as well as the seat seal. There are no paths to the outside environment and, as such, the valve is suitable for aseptic processes. When the valve is being closed, a pressure pad which supports the diaphragm moves towards the sealing face on the body. As the pressure plate moves, the diaphragm flexes and is forced down onto the seat area in the centre of the body, thus, closing off the flow path through the body.The valve can be actuated either manually or pneumatically and controlled by control units and solenoid valves.A standard diaphragm valve is used to shut the flow of a line, an NDL type valve shuts only one outlet of the main line.   Design and features   Comparing with a traditional diaphragm valve, the dead leg of an NDL valve is reduced to a minimum due to the design of the valve, and the pharmaceutical normatives like ASME BPE prioritise this condition. Broad flexible range based upon a modular design concept with key components being common with other valves.Autoclavable stainless steel bonnets and handles. Handle with stroke limiter.Hygienic design of the handles.The valve body is machined out of a stainless steel block. Completely drainable design.Traceability of components.   Materials   Parts in contact with the product Stainless steel AISI 316L (1.4404)Other stainless steel parts Stainless steel AISI 304 (1.4301)Plastic parts PP + 30 GFDiaphragm EPDM (according to FDA 177.2600 and USP Class VI) Surface finish:Internal Ra ≤ 0,5 μmExternal Bright polish   Options   Diaphragm: FPM, VMQ (according to FDA 177.2600 and USP class VI) and PTFE / EPDM separate (according to FDA 177.2600).Stainless steel bonnet with plastic or stainless steel handle.Pneumatic actuator with stroke limiter.Pneumatic actuator with external switch.Control box with switches and solenoid valves.Materials and roughness certificates.

• Material: Aluminium, Brass/Bronze
• Media: Air, Gas, Fuel

• Brand Name: Inoxpa
• Usage/Application: Industrial
• Parts in contact with the product: AISI 316L
• Other st.st. parts: AISI 304L
• Gasket: EPDM according to FDA 177.2600
• Internal surface finish: Ra <= 0,5 micro m
• External surface finish: Bright Polish

• Type: 2/2 Way
• Frequency: 50 Hz,other frequencies on request,(60 Hz) On request; connector with LED
• Brand: Tork
• Coil Impregnation: Polyester Fiber Glass
• Connector Specification: ISO 4400 / EN 175301-803,Form A,Spade plug (Cable Dia. 6-8 mm )
• Protection Degree: IP 65 (EN 60529) with coil duly fitted with the plug connector
• Electrical Safety: IEC 335
• Coil Insulation Class: H (180 deg C)
• Ambient Temperature: From -10 deg C +60 deg C
• Standard Voltages: For AC 12V,24V,48V,110V,230V but Mini. power 18 W,For DC 12V,110 V but Mini. power20
• Voltage Tolerances: For AC %-15,%+10,For DC %-5
• Coil Encapsulation Material: Fiber Glass Reinforced
• Continuous Duty: ED %100
• Electric Plug Connection: DIN 46340 3-poles connectors (DIN 43650)

• Material: Casing – IS 2062 MS
• Media: Air
• Automation Grade: Semi Automatic
• Product Type: Rotary
• Usage/Application: To Feed Bio Mass
• Capacity: 1000Kg/Hr to 5000Kg/Hr
• Corrosion Resistance: Yes

gas solenoid valves, Gas Filters, gas pressure switches, Gas Flow Meters

• Material: Brass
• Country of Origin: Made in India
• Pressure: High Pressure
• Corrosion Resistance: Yes
• Head Type: Threaded
• Type: Spring Loaded, Rubber Seal
• Brand: Nitin Enterprises
• Magnet: Magnetic can be supplied
• Valve Size: M18, M22, 1/2"BSP
• Size: M10 - M30 , 1/2" - 1" NPTF
• Usage/Application: Industrial
• Washer: Dowty Washer
• Max Size: 50 mm
• Diameter: 27 Hex to 36 Hex

Valves to feed & discharge materials with airlock to pressure or vacuum. Discharge material ranging from abrasives minerals to baby food, explosive chemical of pharmaceuticals as well as hazardous chemical of food & radioactive dust of pigments etc. Useful in most adverse operating conditions of temperature & pressure. Close operating clearance for optimum efficiency. Quick & easy access to internal components. MOC: - CIMS, SS 304, SS 316, SS 316L, Aluminum. Range Capacity: - 50 kghr to 50000 kghr Size: - 100 mm to 800 mm

• Brand Name: DIG
• Release Device Connection: G 1/8"
• Color: Golden
• Product Code: 0 29730040
• Certification / Homologation: VdS

Bleed Valve - Used in Fixed Installation Fire Systems To vent overpressure and prevent false fire safety system discharge in the event of a small pressure leak from the cylinders into the pneumatic actuators — used in fixed installation fire systems. Key advantages: Exceptional quality for dependable fire suppression performance when it counts Long service life for cost-effective fire protection Product Code:0 29730040

RUTCON Series 1125 PFA Lined Globe Valve is one piece valve body which has pure modified PTFE trim parts, push-down-to-close action, and positive shut off, and PTFE bellows seal. PFA Lined Globe Valve is for applications involving severely corrosive and toxic flowing media and is well suited for pure media application as well. Rutcon PFA Lined Globe Valve provides economical alternative to alloy bodies in a wide variety of applications. Details Sizes : ¾� to 4� (20mm to 100mm) Higher sizes available on requestRatings : ANSI B 16.5 150# and 300# other standards available on request Applications Corrosive chemical use, including most hazardous and toxic fluidsUltimate performance handling Chlorine (Wet & Dry) and Bromine, Hydrochloric, Sulphuric, Nitric and Hydrofluoric acids Industrial reagents, Alkaline and strong basic fluids and most organics. Design & Performance Features The PFA (perfluoroalkoxy resin)-lined assembly provides corrosion protection by shielding metal parts from the process media, making it ideal for controlling severely corrosive media. Tight shut off Maximum operating temperature 1800 C with Teflon seatHeavy duty PTFE bellows (PN 16 rating) design has an enhanced resistance to permeation Use of expensive alloys is not necessary hence design becomes economicalMinimum obstruction for flowing mediaThe top entry design eases in-line maintenance. This design also minimizes the transfer of pipeline stress, which minimizes leakage both at the valve body joint and seat ringEasy to maintenance interchangeable top entry valve plug & seatSpark Test. 15KV

• Seat / Disc Seal: EPDM, Nitrile, Hypalon, Viton, Metal seated
• Power Operator: Quarter-Turn or Multi-Turn Electric Actuator

Complies to:Std to be entered, Design :Centric Triple Offset Metalseated, Size:(a) Centric Design: 50 to 1200mm (b) Eccentric Design: 50 to 1800mm, Rating:PN-10, PN-16, ASA-150, ASA-300, MoC : CI-DI-WCB-CF8-CF8M-CF3-CF3M-LCB-WC1-WC6-CN7M-CD4MCu-HAST-BHAST-C

VOLFRAM make Valves are tight sealing, easy operation, regulation valves for liquid and gaseous fluids over a wide range of line pressures and temperatures. Globe valves are of outside screw & yoke (OS & Y) and with bolted bonnet construction. The outside screw ensures easy lubrication and prevents corrosion and erosion by line fluids. Features Globe Valve:   Body & Bonnet: The body is designed for strength to meet the operating conditions and contoured to minimize erosion and resistance to flow. The bonnet is provided with renewable back seat arrangement. Disc & Stem: The disc provides a fine bearing on a taper seat for tight sealing over wide range of differential pressures. As the seating between disc and body seat is a narrow line contact, tight sealing can be achieved even if any foreign particle gets stuck to the seating area. The disc and stem are held together by a disc nut with allowance for disc to swivel. The disc nut is tack welded to prevent loosening in service. Body & Seat Ring: The seat ring is seal welded to provide a bubble tight joint. Back Seat Arrangement: The back seat is designed to relieve back pressure on the stem packing when fully seated. Seating Surface: Globe valves can be offered with stellite seat, if specified. Stellited seat ring provides increased resistance to ware, abrasion and erosion of the sealing surface. Gland Arrangement: The stuffing box holds a minimum of 6 packing rings to enhance gland tightness and increases the life of packing rings. End Connection: Standard valves are offered with flanged ends (butt weld ends provided on request) to the following standards:   - Flanged      :ASME B 16.5 Raised Face   - Butt Weld   :ASME B 16.5 to suit the corresponding pipe schedule Standards:   Design : BS-1873 Face to face / Dimensions  : ASME B 16.10 Testing : BS 6755 Part I (EN 12266-1) Valves can also be offered with IBR certification. Accessories: Globe Valve can be supplied with accessories like Extended Stem Arrangement, Gear Operation, and Pneumatic Electric Actuators, Chain Wheel Arrangement, Drain Plug etc.

• Material: Aluminium
• Model: Metal PC
• Finished Type: Powder Coated
• Pressure: Medium Pressure
• Brand: Cool Grills
• Usage/Application: Commercial

• Condition: New
• Material: SS
• Brand Name: Deluxe Industrial
• Color: Silver,, Green, Red

• Material: Stainless Steel
• Valve Size: 1.5 inch
• Operating Pressure: Up to 3,700 psig
• Process Fluid: Liquid
• Body Style: Angled and Inline
• Set Pressure: 50 psi

Rotary Airlock Valves to feed & discharge materials with airlock to pressure or vacuum. Discharge material ranging from abrasives minerals to baby food, explosive chemical of pharmaceuticals as well as hazardous chemical of food & radioactive dust of pigments etc. Useful in most adverse operating conditions of temperature & pressure.

Rotary airlock valve, also known as rotary feeder or rotary valves, are commonly used in industrial applications as a component in a bulk or specialty material handling system. Rotary airlock are primarily used for discharge of bulk solid material from hoppersbins, receivers, and cyclones into a pressure or vacuum-driven pneumatic conveying system with good airlock condition.

We provide range of specialist valves for MGPS.Lockable line valve compliance with HTM 02-01.Solenoid line valve with different voltage compliance with HTM 02-01Ours valve tested as per EN 331 1198 and confirm to DIN.

• Valve Size: 1 INCH 2 INCH 3 INCH
• Material: Stainless Steel
• Usage/Application: Industrial
• Pressure: Medium Pressure
• Surface Finishing: MATT POLISHED
• Grade: AISI 304 / 316
•  :  

• Size: 2 Inch
• Brand Name: Eurosia
• Pressure: High
• Color: Black
• Material: Cast Iron
• Country of Origin: Made in India
• Media: Water
• End Connection Type: Flange
• Automation Grade: Manual

• Material: CI
• Automation Grade: Automatic
• Voltage: 220 V
• Motor Power: Up To 5 HP
• Capacity: 100 kg/min

• Working pressure:: up to 10 bar
• Working temperature:: up to 150°C
• Nominal size:: DN 4 - 600 mm
• Body material:: stainless steel alloys such as 316 L, 1.4435, 1.4539, 1.4408
• Seal material:: EPDM, Hypalon, Perbunan, FPM, silicone, PTFE/TFM
• Connection:: Threaded sockets, flanges, butt weld spigots, clamps and unions
• Operation:: Manually, pneumatically/hydraulically operated and motorized
• Options:: Straight through body; T body in PVDF and stainless steel; multiport and tank bottom outlet bodies in stainless steel

Applications:   Depending on the design, but especially suitable for high purity media through to heavily contaminated media; high viscosity, liquid, gaseous, corrosive and inert media. In combination with suitable control equipment, the diaphragm valve is a good alternative to the classical control valve especially with liquid and contaminated media.

Lever operated directional control valve with or without safety valve, WINDE is monoblock distributor. Its body is made of cast iron EN -GJL300. Plungers are made of carburized steel with hard chrome plating,

• Material: vary
• Brand Name: Schrader
• Size: All sizes available
• Features: Durable, Reliable, Excellent, Smooth finish, Contemporary designs.

• Feature: Highly demanded, Various sizes,Reasonable price,High strength

FRESH AIR DISC VALVE, linear grills, square diffusers, slot diffusers

industrial globe valves, Check Valves, Foot Valves, Knife Gate Valves

We deals in manufacturing of wide range of thermodynamic type steam trap.